Update Multiple Textbox Controls?
May 15, 2009
I am trying to modify our web based program to allow for a second column of information to be entered and updated to the same table as what was in the first column. This program was written by others, so I am trying to keep within their format and structure.The idea is to have three columns (a fourth is currently sThe first column is the label column, the second column is a numbered assessment (1-10) and is currently free form textbox, and the third column (the one I am not able to get updated) should be a free form text box allowing as much comment as possible (without being a SQL text field).
The following is the two sub sections of the vb script:
Sub GetSkillsAssessment()
Session("PeSkills") = Nothing
[code]......
View 1 Replies
ADVERTISEMENT
Jan 25, 2012
I have many textbox controls and they are named as txt1.text, txt2.text, txt4.txt etc.I want to raise the event "Leave" when txt1.text leaves or txt2.text leaves.but with a single handler.
View 2 Replies
Nov 20, 2011
I've got a couple of these NumericUpDown controls I put on a form. Without describing too much about the form I basically want to update some variables each time one of these NumUD controls changes value. So for each NumUD I have a call to a Recalculate subroutine within their "changedValue" event.
There are actually two problems. First, if I initialize the "Value" property to something other than zero in VB2010 at DESIGN TIME it won't even open the form when I hit RUN. It gives me a "No Source Available. No symbols loaded for any call stack frame" error. The error box says "InvalidOperationException" was not handled. So if I try to set the initial value of the Value property to anything but zero of either I get this error.
[Code]...
View 7 Replies
May 22, 2009
I wanted to know if anyone could tell me how to access the Click_event.I have a boarderles form with a panel control which has the Dock property set to fill and on the panel I have placed a Label also with the Dock property set to fill. I also have a timer running.How can I get code to execute in the Label1 click event.I've tried doing it by using the generic Click_event and also with two variations of the Click_event Handles parameters
'Alternativ 1:
Private Sub Form1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label1.Click
[code].....
View 16 Replies
Dec 17, 2009
I am making an application that uses multiple WebBrowser controls, and multiple proxies.The code for changing the proxy settings are as such:
#Region "Proxy"
Public Structure Struct_INTERNET_PROXY_INFO
Public dwAccessType As Integer
Public proxy As IntPtr
[code]....
Note: getRandomProxy gets a random proxy from a list.Problem is that whenever RefreshIESettings(getRandomProxy()) is applied, the proxy will be applied to all of the WebBrowsers, while i would need to have a unique proxy for each WebBrowser. Not having this would just error out the page in the other browsers and so on.
View 1 Replies
Aug 23, 2011
There is newer code in a follow up post. I suggest using the code in the later post rather than the code in this one. You can still read this post though. When designing a user interface, one should be conscious of how many individual controls are required to implement the functionality. In some cases an initial design may begin with many buttons or textboxes (for example) but then further review of
the actual required functionality allows for a reduction in the number of unique controls.
But other times, there isn't a better way (which will still make sense to the user of the application) then to have a series of many repeated controls. So in the cases where one can be certain that the best UI implementation for an application will require the use of multiple copies of a given control, then it often becomes necessary to maintain some method of managing all of those controls at various points
throughout the application. Doing so typically requires that one build up some collection of controls which can then be accessed by index in order to work with any given control; but this can lead to a lot of clutter in the code file which handles these control's events. For instance there will be some kind of collection declaration, some recursive routine to find all of the controls of interest, and then any number of event handler methods with long lists of Handles clauses, or additional code loops to wire up the event handling for each control.
Purpose Since most of this functionality could be considered a requirement regardless of the type of control being managed, or its required functionality, it may make sense to wrap all of the control management functionality into a single class. And since our first requirement is a collection of controls, then a base collection class could be the perfect starting point for our control manager. There are a number of existing thread around this topic, with some recent (at the time of this writing) ones being:[URL]..In this, and related, threads I have posted examples of a simple TextBoxManager and ButtonManager control. But again, with so much similar functionality required regardless of the control being managed, it would be technically possible to create a generic ControlManager(Of T As Control) class which can manage any type of control.
[Code]...
So in summary, one can facilitate managing a large number of user interface controls by building a "control manager" class which both encapsulates the list of control instances, and deals with adding and removing defined event handlers for every control it manages. The generic control manager class itself can be inherited and extended into a more specific class on a per-application basis in order to provide more application-specific functionality. Reed Kimble - "When you do things right, people won't be sure you've done anything at all"
View 9 Replies
Nov 11, 2009
I have aspx form with several textboxes.They are populated with values from a table via retrieval of a dataview.If the row count for the dataview is 0, then I'd like to reset the values in all textboxes. How can I loop through all the textboxes and set a default value?I've tried the following, but no sucess.
For Each ctrl As Control In Page.Form.Controls
If TypeOf ctrl Is WebControls.TextBox Then
CType(ctrl, WebControls.TextBox).Text = ""
End If
Next
My first For Loop was using Page.Controls but it returned only 1 count.The textboxes are inside a tabpanel (ajax), so do I have to locate the tabpage and then find all it's controls (for each tabpage)?
View 1 Replies
Apr 13, 2009
i have two controls consider two text box, as i enter a value in one text box the other should also be updated with the same. I used handlers but the problem with that is only when i leave the control the other gets updated i need it to be dynamically updated.
View 2 Replies
Apr 22, 2012
I am trying to write an app that in the thread will do some tasks, the form lokks like this:and what it should is something like this:
- retrieve data, populate a row in the listview, increase the first progress bar
- retrieve data, populate a row in the listview, increase the first progress bar
- retrieve data, populate a row in the listview, increase the first progress bar
[code]....
View 2 Replies
Feb 25, 2011
My code looks like this:
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<Triggers>
<asp:AsyncPostBackTrigger ControlID="btnAddIsotope" EventName="Click" />
[code].....
View 1 Replies
Aug 12, 2011
I need to be able to programmatically create new tabs on a TabControl, add controls to them, and be able to update the controls in each tab from another function. I already have a function to add tabs to the control, and to add controls to those tabs when they are created, but I'm stuck as to update the controls after they have been created.EDIT: This is what I have to make the tabs and add the controls:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim tabpage As New TabPage
tabpage.Text = "(empty)"
[code]....
I can't seem to get back into the account I used to post this question, so I have to post my follow-up to Tim's question in the comments for the previous answer as a new answer.Debug.WriteLine(TabControl1.TabPages.Item(2).Controls.Find("textbox1", True).Count) returns 0. The tab and the controls have been created prior.
View 2 Replies
Aug 7, 2011
When it comes to Backgroundworker's, I just make a total mess, even after reading over and over again the Backgroundworker component info on the msdn site... I have a code I would like to run on the form but if I do it with a simple "Public Sub" it will make the form lag, freeze, until the operation is done. So I try to paste the same code into a backgroundworker, and use Runworkerasync, but I get errors stating that the backgroundworker can't access controls on the form.
[Code]...
View 7 Replies
Aug 23, 2010
I have a datagridview and some textboxes and other controls all bound to a bindingsource. When I first run the project the controls all show the correct data (the first row in the datasource) but when I change rows in the datagrid my controls do not update their data.
My code:
Private Sub BindData()
Try
bs = New BindingSource
bs.DataSource = dtPromoList
dgvPromo.DataSource = bs
[Code] .....
View 8 Replies
Feb 18, 2012
i need to take data input from a textbox such as this
[Code]...
and get it so i push a button and it seperates it out so it adds and looks like this inside a display field
[Code]...
View 6 Replies
Sep 25, 2009
I have used delegates multiple times over the years but for some reason this very simple code isn't working:Form has one button and on textbox. Simply trying to update the textbox from another thread and although it looks fine it's not working.[code] the parameter is being passed to the DoSomething, the UpdateTextboxText is being run and gets the correct string. But the textbox itself remains blank and I'm stumped.
View 1 Replies
Sep 22, 2010
I'm trying to update my records via my controls without any results. It keeps telling me that there is an error in my SQL syntax. I've overlook everything and tried many variations I found on the internet, but none of them worked for me.
[Code].....
View 15 Replies
Aug 26, 2010
When I click a cell or a row in a datagridview I want to be able to open a new form with several textboxes and comboboxes in it and to be able to edit the selected row. The only thing I managed to do so far, was to fill a texbox from the form with the info from the sellected cell using the following code.
Dim
cell As
DataGridViewCell
[Code]....
View 2 Replies
Apr 12, 2012
I have the following code which is used by 7 comboboxes, the only difference is the combobox1 to 7 and the DataGridView5 to 11. In VB6 I would have used arrays, is there any way to write the code once or do I have 7 ComboBox1_SelectedIndexChanged subs.
[Code]...
View 4 Replies
Nov 21, 2011
My application has a TabControl which has 5 tab pages. Each page represents a "department" and each department has to run this software. So when the user opens the application, they navigate to their department's page.
The software runs a serious of automated and manual tests. The tests are customized for each department. But I need to update the UI during each section of the test.
On the main tab, there is one panel that has 17 PictureBoxes. Each PictureBox represents one test. The PictureBox can either represent a test in progress, a test passed, or a test failed.
All of the tests are in their own code files, for the most part. And in the main form is when I call the tests and update the UI from a single method.
The issue I'm having is how to update the PictureBoxes without creating a bunch of redundant code.
When the test runs, I update the first PictureBox with "in progress", then when it completes, it's update again with pass or fail. So for a single test, I could need to place the UI update in several places, within the same code block, for planning out all the possible conditions.[code]...
View 1 Replies
Oct 31, 2010
I have a form and controls on from I work with background worker on my form and I want when I work with background worker in (for next) changed a data table example (mydt.clear()) or change a datagrideview..how to update controls on a form when we work with background worker? [code]
View 4 Replies
Jul 6, 2011
AM trying trap specific events for some controls on a form. i tried this, but its not fireing the events
[Code]...
EDIT I found out that am placing the control in multiple controls, on the form is a panel, inside the panel is different groupbox, these group boxes have the controls am trying to trap their events
View 1 Replies
Jul 22, 2010
Recently i worked on a VB. I have to know how can create controls Dynamically on the run time and how can access these controls on the runtime??
Ex: I want to Create 10 checkboxes at runtime. After creating Checkboxes Dynamically how can i access these Checkboxes?? like i create Checkbox Called "chkAll" , If i check "ChkAll" checkbox then all Dynamic Checkboxes should be Check otherwise UnCheck?
View 13 Replies
Sep 29, 2010
In my project, I am trying to change the visible property of my various pictureboxes using a for - next statement. My aim is to get the value of my numericupdown1 control and use this number to make the pictureboxes visible. For example, if this number is 8, the picturebox1, picturebox2, .......8 will be visible. Here is the code I wrote:
[Code]...
View 27 Replies
Mar 15, 2012
I need to change size parameter of OvalShape, I have about 100 of them, named like OvalShape1, OvalShape1...... OvalShape100
This example works for Label, but throws error for OvalShape, following is my modified code that giving error;
For Count As Integer = 1 To 100
[code].....
View 5 Replies
Sep 29, 2010
This sounds simple and I'm sure it is. I have a form with textboxes and combo boxes within a tabview that has 8 tabs. All the data is loaded from a database. The user has the ability to update these controls and then update the record in the database. Is there a way that I can check an entire tab view or group of controls for value change other than using an if statement to cycle through each control? Something to the effect of If TabControl changed, then execute...
View 2 Replies
Jan 21, 2012
I know how to create a control at runtime e.g.[code]Can anyone tell me how to create multiple instances using a for-next loop? e.g.[code]The part I can't work out is how to give each new button a new name... like button1, button2 etc
View 4 Replies
Nov 20, 2009
I have a form with six picture boxes on it. Each Picture Box has a button underneath it. When the button in clicked, a "Label" and "Textbox" appears. My question is, how can I close the currently open "Label" and "Textbox", when I click another button. I have a working code below, but it's not efficient. As you can see, I will have to list all labels and textboxes on the form. Is there a way to identify all labels and textboxes without naming them all. [code]...
View 3 Replies
Aug 12, 2009
Has anyone tried using controls from different sources into their application that uses winforms? Will these combination of controls work together?
View 3 Replies
Mar 9, 2011
I have eight NumericUpDown controls in my form, I call them NumericUpDown_1 thru NumericUpdown 8. I first noticed when I set a breakpoint in say NumericUpDown_1 routine and have code inside this routine to manipulate say NumericUpdown_6's value, the code would immediate jump to NumericUpdown_6 routine because the value changed. This makes sense since the handler fires due to the default handler - numericUpDown_valuechanges. But I do not want this to happen so I removed the handlers for all NumericUpdownX routines, one thru eight and instead I use "addhandler" and "removehandler" statements inside the individual routines to "mask off" this problem every time I change a numericUpDown.Value that is not in it's own routine.
My problem is this does not work. What I found is if I use removehandler numericUPDown_x.valuechange addressof numericUpdown_valuechange statement the coding would work however when I'm done in that routine I follow up with addhandler numericUpDown... statement and I'm back to the same problem. A different numericUpDown routine will fire because I changed it's value in another routine but I had the handler removed before I changed it's value so I don't understand. It's almost like it remembered that it's value changed as soon as I turned back on the handler using addhandler. I'm working with Visual Basic 2010.
View 13 Replies
Mar 22, 2012
I have a set of controls and code behind them that I'd like to reuse on multiple forms. How can I do this? I know of reusing code via modules, but I'm not sure how I can add the same controls and their underlying code. If I achieve this, will changing data on one form affect the values of another form when they're both open? For example...
Cbox1's selected item affects the choices within Cbox2, and Cbox2's selected item affects the choices within Cbox3 (and so on).
So if I do something on Form1's Cbox1 and it changes Form1's Cbox2, will it NOT change Form2's Cbox2?
View 4 Replies
