I want to show in my form, something to show the user that the program is working just wrote a Label, but Visual Basic Freeze during the process and the label it can not seen and there is not signal to know that the application is working.
View 1 RepliesI have created a porcess that manipulates large volumes of text. I have created a form that has a button that manually starts the process. I have tried to give some feedback that the process is actually progressing through the data by changing the value of text fields on the form. However the text fields do not update on the form until after the process is complete. I had this working in another program but cannot figure out what I am doing different.I use the following code to change the text.[code]
View 2 RepliesI have used delegates multiple times over the years but for some reason this very simple code isn't working:Form has one button and on textbox. Simply trying to update the textbox from another thread and although it looks fine it's not working.[code] the parameter is being passed to the DoSomething, the UpdateTextboxText is being run and gets the correct string. But the textbox itself remains blank and I'm stumped.
View 1 RepliesI want my vb.net dll to get the data sent from c++ project(exe).Can any body help on in what form this void pointer can be sent via pipe. The void pointer corresponds to enums or structures. I have to get this structures/enums on the vb.net dll end. I have mentioned about using pipe. My question is as what type the pointed to data can be send over the pipe so that I can easily handle the received data at the vb.net dll end.
View 1 RepliesI want to get the Private Working Set of a process (as it shows in task manager), using the Process Class. I'm able to get the working set /1024, but this number does not match the number I am looking for. Is the Process class capable of doing this?
View 4 RepliesI am launching a new process from within my application and it works fine. The problem occurs as soon as I physically close the spawned process; I get a message from windows saying that "Process X has stopped working." If I kill the process programmatically in the calling .NET application, all is well.
View 6 RepliesI am tring to build network toolkit for my very computer illiterate techs. What I am trying to accomplish is to embed a command prompt of sorts in a form. I have been sucessful to a point. Here are my main two problems.
1: I cannot read line by line as the output of the process is generated. Rrather I have to wait untill its complete, this is ok for "IPConfig and Maybe "Ping". But for longer diag tests this would take too long and it would look like the app has crashed. So I need to figure out how to redirect the output of the process to my text control.
2: I would like to have the ability to redirect keyboard input to the process. For telnet as an example. I would capture all keyboard commands while my text control has focus and send them to the process and with the problem solved I should be able to establish 2-way IO with the process. Is there a way to do this or am I barking up the wrong tree.
[Code]...
I'm trying to redirect the output from a command-line application in VB.NET, and for some reason it fails to redirect the output. Here's my code:
Dim myProcess As Process = New Process
myProcess.StartInfo.FileName = "g++"
myProcess.StartInfo.Arguments = CMDLineCommand
[Code]......
I wrote code for checking whether a particular process (Outlook.exe, in my case) is running or not. It is working fine when the Outlook window is open or minimized. But, when the Outlook is minimized to tray (which on the right side of taskbar), my code is not identifying the process.Could anyone please suggest me a way to get the process of Outlook (or any other program) that is minimized to tray?
View 2 RepliesThis is my
Private Sub Timer1_Timer()
Dim procs() As Process = Process.GetProcessesByName("samp-server")
If procs.Length > 0 Then
[Code]....
Its supposed to start the samp-server.exe if it closes but it doesn't?
I've got an application that has a bug right now, but we're unable to update the end-user to get the fix out. What a possible workaround would be is to change the working directory to the application's install directory, but from what I can tell, there's no way to do that outside of the program itself.
View 2 RepliesI'm using Visual Studio 2003, and I have a macro similar to this:
[Code]...
The first time use the macro, it works fine. Each subsequent time, even after I detach from the process, the .Attach() doesn't seem to do anything. The same thing happens as I step through the macro... the proc.Attach() gets called on the correct process, but nothing happens. One note: when viewing the process in the Processes window, the Type column for my process shows ".NET, Win32".
I'm currently writing an installer for my application (don't ask me why I don't use ClickOnce or other types of installers...).I simply create a folder in C:Program Files and I download my apps' AutoUpdater into the folder and run itFrom there, the AutoUpdater should download the latest files from my server. However, when I check the directory where the files should have been downloaded, I can only see the AutoUpdater
View 4 RepliesWith the following SQL " Dim Query As String = "UPDATE JobName_tbl SET [JobDate]=@NewDATE, JobAddress=@Newaddress Where JobID=@ID"
nothing happens nothing gets updated nor do I get an error.But as soon as I remove the [JobDate]=@NewDATE, it works fine.
Here is my code:
Public Sub UpdateAddress(ByVal JobID As Integer, ByVal JobUpdate As String, ByVal NewDate As Date)
Try
Dim Query As String = "UPDATE JobName_tbl SET [JobDate]=@NewDATE, JobAddress=@Newaddress Where JobID=@ID"
Dim DBcon As New DBConnection.Connection
[code]....
I'm running Microsoft Visual Studio 2010 SP1 and SQL Server 2008 R2 and I'm using vb.net coding. Any other information that you need to know, just ask.I've got a form in a master/ details setup that has one table in details view in the top half of a split container, and another table in a dgv in the bottom half of the container. Everything is working well except for one value. My dueDate value always reverts back to the date set when the record was made, which is the default value put in when a new record is made. It doesn't give me any errors to work off of, and I've even went and coded the update by hand with this code:
Dim Num, Contract, ID, Receive, Due, Notes, Inspect, SO, PO, Entry As String
Num = Order_NumToolStripTextBox.Text
Contract = Order_ContractTextBox.Text
[code]....
All that happens when I hit save is my due date will revert back to the old due date. I have no clue what would/could cause this. I've went through to see if anything that would store the original dueDate (from a check I set up in my coding) is coded somewhere it shouldn't be, but all it does is make the check that something had changed while on the form. it takes an array of all my text boxes and checks it with an array made before leaving the form. Nowhere else is the original dueDate saved.
I'm reading a file and then closing it with the following code, but my problem is later when I start a batch process it says the file is still in use. Am I doing something wrong in closing it? The process was working fine prior to my adding this code to read the file.
[code]...
This rexx exec is trying to write to the file that I read from in the prior step before creating a PowerPoint presentation, but fails becuase of the lock.I'm at a loss. I should qualify and say the process actually starts, but fails in the rexxexec after it starts, it isn't failing on the process start the rexx exec issues a message that it can't write to the file becuase it is in use.
I want to update & display the values of labels on my form during a long loop.[code]...
View 6 RepliesI am using VB 2005 and the following code returns an error: No value given for one or more parameters. I swear I've done this before without any problems but I can't find my original code.[code]I tested the value of oldid which is set earlier and it does have a value.
View 2 RepliesI'm developing a system and the system contains an update function to update the DB. I have performed all the coding but have some minor problem in my SQL Statement and I'm unable to detect the SQL Statement Error. Hope someone could rectify the problem.
[Code]...
Dim sqlupdate As String
sqlupdate = "UPDATE sysdep SET sysaccount= @sysaccount, syspw= @syspw WHERE id= @id"
Dim cmd1 As New OleDbCommand(sqlupdate, con1)
[Code]....
This is my code for update, but not working,UPDATE STATEMENT WRONG?
I'm trying to update my wallpaper with VB.NET and it's not working. Weird thing is, this same code works fine on my other machines (same OSes, Win XP Pro SP3). My code grabs a random picture then passes it to the SetWallpaper function:
<System.Runtime.InteropServices.DllImportAttribute("user32.dll", EntryPoint:="SystemParametersInfoW")> _
Public Shared Function SystemParametersInfo(ByVal uiAction As UInteger, ByVal uiParam As UInteger, ByVal pvParam As System.IntPtr, ByVal fWinIni As UInteger) As <System.Runtime.InteropServices.MarshalAsAttribute(System.Runtime.InteropServices.UnmanagedType.Bool)> Boolean
[Code]...
I need to select some user datagridview settings (such as column width, column visible, etc.) from my database. Then I run a loop to change those settings. If any settings are changed I need to update the database. For some reason I can't get the code below to update anything. The code throws no errors when it executes, but when I check the database for the updates nothing is changed.
Public Sub pubsub_UpdateUserSettings(ByVal FormName As String, ByVal dgv As DataGridView, ByVal MethodID As Integer)
Dim adt As New SqlDataAdapter
Dim cmd As SqlCommand
Dim cmd2 As SqlCommand
Dim dt As New DataTable
[Code] .....
I have my application set up with ClickOnce. It has been successfully published to my web site. I don't have updates performed automatically but on demand. I have a button that the user can click if they want to check if an update is available and install the update if it is. Here's the
[Code]...
After clicking the button a message box appears and says, "Update is available for download" as you would expect but after clicking the ok on the message box my application goes into a not responding state and I have to close it with the task manager. The application builds successfully and I have a reference for System.Deployment added to the project. Everything in my application works fine as long as I don't try to do an update. Any suggestions on what I should check or do? It should actually say "no updates are available for download" since the version of the program that is being used is the most current version.
I use the following statement to position which row to update;
Dim salonToUpdate = (From r In db.Salons _
Where r.StoreID = storeID _
Select r).Single()
If fileDate = #1/1/1900# OrElse fileDate = Nothing Then
SalonToUpdate.LastDownLoadDate = TableDate
[Code] .....
I've double checked to make sure none of the dates are invalid or null, but when the bolded statement executes, the following sql runs through the trace:
exec sp_executesql N'UPDATE [dbo].[Salons]
SET [LastDownLoadDate] = @p0
WHERE 0 = 1',N'@p0 datetime',@p0='2008-01-04 00:00:00:000'
Of course it's going to fail if LINQ is passing in where 0=1 every time. Shouldn't it be using some unique row identifier, (in my case, the salon id), to update the specific row?
I've been trying to get the update method to work on a DataGridView for the past 2 days and I just can't get it to happen!I'm using a "Save Button" to invoke the update and no errors are thrown but the table is not updated when the save button is pressed.
Private Sub Main_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
With NodesDataGridView.ColumnHeadersDefaultCellStyle
.Alignment = DataGridViewContentAlignment.MiddleCenter
[code]....
Im having a very strange problem.. I just copied the source code from one working application to this new application. It was working fine over there but not over here in new application. Neither it was showing any error nor updating the data. Below is the source code (method) that im using ..
public static void AppendViolations(string dsPath, DataTable dtSource, string PartitionID)
{
string ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Data Source=" + dsPath;
string SqlStatement = "select * from IncaViolations";
[code]....
I am trying to update my DGV with the following code. i have generated SQL update command in the tableadapter. but still the changes are not affecting the DB.
[Code]...
I want to update fields in the Table. I Click the save button but nothing changes in record. It Doesn't give error or anything. I Followed the instruction given here
Here is the update
Private Sub btnRSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRSave.Click
Dim DoesRecExist As Boolean = False
[Code].....
I have finished working on a vb.net application (using MS Visual Studio 2008). Now I want to make it check for updates automatically before it starts. So, in the Project Properties I selected the Publish tab, set up a publish version (1.0.0.1). As the publish folder, I entered a local folder ("c:\app_publish").
[Code]...
i have a accordion control(using jQuery) on the page. When I insert accordion into an updatepanel, set a button outside the updatepanel as its trigger and click on the button the accordion stops working. If I remove the updatepanel, it starts working.
<script src="Scripts/ddaccordion.js" type="text/javascript"></script>
<script type="text/javascript">
[code]....