i have a small problem in using the timer as an array here is my code
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim i As New Integer
i = 1
Dim timer(i) As Timer
[code]....
I want to create an array of timer in vb.net. My problem is that how will i raise the tick event for a particular timer, say mytimer(x).tick and inside the tick event there is also a button, say mybutton(x) which changes location every interval. for example:
public class blah
dim mybuttons(20) as button
dim mytimer(20) as timer
private sub form_load(....) handles me.load
for x as integer = 0 to 20
[Code]...
i dont know what to do next, all i want is to pass the button mybuttons(x) to mytimer(x) tick event, in which their index number are the same. i want to create one timer per button. how to do that? please help me and post example codes. i've researched the net but i cant understand passing variables, addhandlers, etc. i'm just new to programming object oriented.
i have a small problem in using the timer as an array..[code]i dont know how and where to write this code?
View 3 RepliesI have this current problem I created user control with timer and use it on my form. My problem is how can I create array timer bound to user control.
example my user control name is uc_project my timer g_tmr
On my main form
uc_project.g_tmr.Enabled = true working fine
But how to make uc_project.g_tmr(index).enabled = true to create multiple timer.
I have a problem that im unable to solve'it because im noob i just started to lean VB.net. What im trying to do is a simple voting application but im stuck, i've setted the code in a timer and what i want to do now is each time the timer restarts to get a new array from a txt file ( because i want to set a proxy each time the timer is restarted) here are some parts of my
[Code]....
[Code]...
I want to create a ProgressBar with my array length, whithout timer object. When ProgressBar increment, the value in array appears in a label.
What I need to do to make this code work for hours as well?[code]...
View 6 RepliesI need an accurate timer to interface a Windows application to a piece of lab equipment.I used System.Timers.Timer() to create a timer that ticks every 10 msec, but this clock runs slow. For example 1000 ticks with an interval of 10 msec should take 10 wall-clock seconds, but it actually takes more like 20 wall-clock sec (on my PC). I am guessing this is because System.Timers.Timer() is an interval timer that is reset every time it elapses. Since it will always take some time between when the timer elapses and when it is reset (to another 10msec) the clock will run slow. This probably fine if the interval is large (seconds or minutes) but unacceptable for very short intervals.Is there a function on Windows that will trigger a procedure every time the system clock crosses a 10 msec (or whatever) boundary?
UPDATE: System.Timers.Timer() is extremely inaccurate for small intervals.I wrote a simple program that counted 10 seconds several ways:
Interval=1, Count=10000, Run time = 160 sec, msec per interval=16
Interval=10, Count=1000, Run time = 16 sec, msec per interval=15
Interval=100, Count=100, Run time = 11 sec, msec per interval=110
Interval=1000, Count=10, Run time = 10 sec, msec per interval=1000
It seems like System.Timers.Timer() cannot tick faster that about 15 msec, regardless of the interval setting.Note that none of these tests seemed to use any measurable CPU time, so the limit is not the CPU, just a .net limitation (bug?)For now I think I can live with an inaccurate timer that triggers a routine every 15 msec or so and the routine gets an accurate system time. Kinda strange, but...I also found a shareware product ZylTimer.NET that claims to be a much more accurate .net timer (resolution of 1-2 msec). This may be what I need. If there is one product there are likely others.
I have a timer on a page in ASP.NET.
After a certain period of time elapses, I want to disable the timer.
I want to put a static variable in the timers tick event that will track how many seconds have elapsed.
My question is, will this work?
If user X and Y are viewing the page will they both have separate local static variables?
What is the best method of shutting down an ASP.NET timer after a certain elapsed time?
I have a windows application that need to process som quite time consuming jobs. In my first try i did all processing under
the form thread. The result was bad response and update of the form due to the heavy jobs.To get around the problem with bad response from the form i created a new class "processing" where i put all the data processing. Then i instanciated a background worker where i in the "doWork" sub created a new instance of "processing".The "processing" class creates a timer from system.timer, and the timer drives the processing.On the Timer event Elapsed the timer starts a new thread from the thread pool.
My problem is now when i want to asynchronously close the background worker (with the corresponding function call what ever it is called ...) there is still a timer thread out there that causes exceptions for me.
1. How can i close my background worker and at the same time have the timer to be stopped?
2. Is there a way to synchronize the timer event so that the timer executes from the background worker thread?
3. Is there a better approach for me to adapt?
How can I incorporate the timer so once a page loads the timer activates, waits a few seconds then I tell my program what to do next.I tried this code but it didnt work:
Timer1.Interval = 5000
Timer1.Enabled = True
Timer1.Start()
[code]....
Everything is nice and dandy on my pc, then I compile, move it to its final destination and I doesn't work! At first I thought it was a OS problem, but both machines has win7, I then thought it was a compilation problem, installed visual studio on the other pc, recompiled still with no luck, then it dawned on me, may it be a problem of 32bit vs 64bit?The piece of code is this:[code]....
By the way is not a problem of mouse_event, is the timer that doesn't work
I have a timer in vb.net and it's interval is 1000ms ,. i have placed in it's timer_tick event a code that will print screen the screen and save it to a database.The problem is when i click outside of the form, or loosing the focus of the mouse to the form containing that timer/printscreen, the timer stops. As a result the printscreen also stops.here are it's properties:
generate member = true
interval = 1000
modifiers = friend
I recently switched my code from using the windows.forms.timer to the systems.timer.timer and it has resulted in a multithreading error. I'm using the timer to trigger just one event so multithreading shouldn't be an issue. To give more detail I have implemented the timer at follows:
At the top of the class I have: Private Shared timr1sec As System.Timers.Timer
When the program loads (Private Sub Test_load):
timr1sec = New System.Timers.Timer(1000)
AddHandler timr1sec.Elapsed, AddressOf OnTimedEvent
In OnTimedEvent I call several subroutines, and write some data to the screen using a ListView object.VisualExpress throws the multithreading error on the last line of this code, which is in OnTimedEvent
[Code]...
I have a routine which is controlled by a timer. It works perfectly. The problem is that now, I need to run this routine several times, so I need to start differents threads so that my program doesn't get hung up. I've been trying to start my timer inside a thread, but it doesn't work!
View 18 RepliesVB6 create object of timer instead of timer control
View 5 RepliesIs it possible to use a timer to delay code? For example:
[code]...
I already created a button "enjoy button" that i want to move in a form when the "timer start button" is clicked.how do link the timer to the"timer start button" and make it move? this is what i tried so far..then am blank first
Quote:
Private Sub MainForm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Me.xTimer.Enabled = False
xTimer.Interval = 10[code].........
In a vb 2010 project, I have 2 win forms: Form1 and Form2.
In the Form1 class there is a server-based timer: when the "elapsed event" fires, then I update the text of a Label1 on the Form2. A very simple code:
Quick question - if I have a timer set to 5000 (5 seconds) and the code in the timer takes longer than 5 seconds to run because of sql stuff, will the timer wait until the code is done till it fires again?
View 3 RepliesI'm wondering what exactly is the difference System.Timers.Timer and System.Windows.Forms.Timer???
View 4 RepliesMy timer pauses (sort of the display portion (label) of the timer indeed pauses, however when the timer is resumed it starts again, but not at the point where it was disabled. As an example. If I pause the timer at 10:00 and wait ten seconds when I hit resume it starts at 09:50, where it should resume at 10:00 or 09:59
Module Helper
Public SessionTime As String
Public Pause As Boolean = False[code].....
In the good old days of VB6 you could not rely on the timer control to fire at exactly the specified interval. If your program was doing some intense processing the Timer_Tick event is pushed onto the stack and only when it gets to the instruction is it processed, which may be some seconds(?) later.
[Code]...
I have an array of people stored in a custom structure array... how can i copy this array to a temp array so that the temp array has all the same values as the original custom array?
View 4 RepliesI am trying to create the following program Store in a 1d array a set of 5 place names and in a 2d array the distances between the places. Ensure that the order of the places is the same in both arrays. When the names are places are input the distance between them is displayed. If they are not both in the table a suitable message is displayed
Dim town(1 To 5) As String
Dim Dist(1 To 5, 1 To 5) As Integer
Dim First As Integer
[CODE]......................
I think the best way forward is pass a parameter to the function findnumber.
I've come up with the following and it's partly working.
Public serial1, serial2, serial3, serial4, serial5 As SerialPort
Public serialports() As Object = New Object() {serial1, serial2, serial3, serial4, serial5}
dComPort = "COM4"[code]....
The above code works fine! But im having trouble trying to now retreive whats stored in the array.In the above example, an entry will be stored in serialports(4), all other array elements will be blank.If I do this it works.
MsgBox(serialports(4).PortName) ' this retuns the value COM4
But I'd like to loop though all array elements and print out ALL the PortNames, The below code doesnt work, I get an error Object variable or With block variable not set.
For i = 0 To serialports.Length - 1
MsgBox(serialports(i).portname)
Next
I'm trying to sort an array based on a structure but whenever I do this, it basically erases all the data in the entire array.I have verified that the array is populated correctly, it is when using array.sort that everything returns blank.
View 6 Repliesinitialize an indefinite (eg. Decimal) array without setting boundaries on the array length?
View 2 RepliesI didn't think it fair to post a comment on Fredrik Mörk's answer in this 2 year old post, so I thought I'd just ask it as a new question instead..NB: This is not a critiscm of the answer in any way, I'm simply trying to understand this all before delving into memory management / the marshal class.
In that answer, the function GetByteArray allocates memory to each object within the given array, within a loop.Would the GetByteArray function on the aforementioned post have benefited at all from allocating memory for the total size of the provided array:
Dim arrayBufferPtr = Marshal.AllocHGlobal(Marshal.SizeOf(<arrayElement>) * <array>.Count)
I just wonder if allocating the memory, as shown in the answer, causes any kind of fragmentation? Assuming there may be fragmentation, would there be much of an impact to be concerned with? Would allocating the memory in the way I've shown force you to call IntPtr.ToInt## to obtain pointer offsets from the overall allocation pointer, and therefore force you to check the underlying architecture to ensure the correct method is used*1 or is there a better way? (ToInt32/ToInt64 depending on x86/64?)
*1 I read elsewhere that calling the wrong IntPtr.ToInt## will cause overflow exceptions. What I mean by that statement is would I use:
Dim anOffsetPtr As New IntPtr(arrayBufferPtr.ToInt## + (loopIndex * <arrayElementSize>))
I've read through a few articles on the VB.Net Marshal class and memory allocation; listed below, but if you know fo any other good articles I'm all ears![URL]..
Per this UserControl that can be added to a blank form, I would like to use the HorizUnits array below to map custom grid x coordinate from a mouse x position.For a given input value 13, what syntax would I use to obtain a value of 2 where 13 lies between Value 10 and 16 for which 2 (Name) would be the custom grid's displayed coordinate position?
View 1 Replies