I want to use a Wingdings character on a button control. I set it's font property to Wingdings but I don't know what to put in the text property field.In the Windows Character Map app the character code I want to use is 0xFC. I tried entering that but it displays as someting else. I also tried &hFC but that doesn't work either. I know how to do it in code, but I want to do it in design mode if it's possible.
View 2 RepliesNeed to enter characters into a label box as input that should display wingdings as output in a text box.How do you write code in VB to convert characters (ABC) from a label box to wingdings in a text box?
View 2 RepliesEssentially I am trying to replicate the Windows 7 (In-Windows) activation key TextBox form. The Form where it will auto capitalize letters, remove or deny all non alphanumeric characters except dashes every 5 characters that will be auto-input.I assume this can be done with a fairly complicated replacement Regular Expression but I cannot seem to create one to fit the needs.
This is an Example of what I have right now, but it creates an infinite loop as it removes all characters including dashes, than adds a dash, which changes the text and removes the dash again.
[Code]...
i have been trying to remove special characters. i am not able to remove many crlf in middile of the string.
View 3 RepliesI need to create a console program that allows you to enter a string, of which is then outputted in reverse.
Sample:
Input: Diewas
Output: saweiD
Apparently I need to find out about strings and will also need to use a loop.
Not sure if too many people know this, but the following line will cause an error:
GroupName.Substring(0, 3) = "jt_"
....if the length of GroupName is less than 3 characters. I always thought it would simply return whatever characters in GroupName, but no, it errors. I must be thinking of the old VB6 days.So, I now have to change the code to:
If (GroupName.Length > 2) Then
If (GroupName.Substring(0, 3) = "jt_") Then
Note that the two comparisons need to be on separate lines. If they are on the same line, such as:
If (GroupName.Length > 2) and (GroupName.Substring(0, 3) = "jt_") Then then the code will still fail as the length command is executed at the same time as the substring command- which will cause the error when the GroupName length is less than 3.Just thought that those of us not aware of this should be!
dp.SyntaxHighlighter.ClipboardSwf = '/dp.SyntaxHighlighter/Scripts/clipboard.swf'
dp.SyntaxHighlighter.HighlightAll('9844f9bfb55449e6a786fa62aaadfa20')
dp.SyntaxHighlighter.HighlightAll('f6d554fd98464bdba9159b319e51b381')
dp.SyntaxHighlighter.HighlightAll('93bf4ca63ad8447abdf084d8a9991e15')
I have two textboxes. I type in one of them and the text gets copied in real time into another textbox. There is one catch. I need to replace specific character with something else.
If I enter a quote " in textbox1, it has to be replaced with " in textbox2.
I started with something like the below code, but obviously this does not work (tried different stuff - this is for demonstration only). In the example below 'a' represents " , and 'b' represents "
Private Sub TextBox1_KeyUp(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.KeyUp
TextBox2.Text = TextBox1.Text
[Code]....
With the shape of really large characters such as numbers and alphabetic characters + others, is there a way to get that shape as a REGION please?Imagine a really fat snake forming the letter S or two rectangles placed together to form a large letter L or a T like the shapes in TETRIS.
1) Does anyone know of anything in VB.Net that can translate such shapes into a System. Drawing.Region or know of a project elsewhere that achieves this please?
2) While I'm on the subject, how would you SCALE UP / DOWN a System.Drawing.Region please? How would you work out the Transform Matrix required please?
I'm making an application that will change position of two characters in Word.
[Code]...
Program works good, it is mixing characters good, but it doesn't write text to the file. It will write text in console, but not in file. Note: Program is working only with words that are divisible by 2, but it's not a problem. Also, it does not return any error message.
I'm making a custom control suited for handling passwords. I have created a control that inherits from a text box and I have implemented a lot of things so far. But what i want to do now is create a system so that when a user types It will display his last character typed for a X amount of time. Is there a way to turn only selected characters into password characters and still be able to get the password text from the Text property ?
View 4 RepliesI know that the topic is kind of weird, but I will explain that here. I am reading text from a text box and inserting that into a listbox. I am wanting to read what the user inputs into the text box and add a character between each character they type. Here is what im wanting to do written out[code]...
View 4 Repliesexample. i have 2 textboxes and if there empty it says "Incorrect Information", but how do i make it that like when a person enters something into the textbox1 it can be 3 values minimum.. like it could be eather 2 letters 1 number or what ever just more than 3 values (no special characters), and on the password.. 6 values minimum (no special characters).
[Code]...
So I have an ASP.Net (vb.net) application. It has a textbox and the user is pasting text from Microsoft Word into it. So things like the long dash (charcode 150) are coming through as input. Other examples would be the smart quotes or accented characters. In my app I'm encoding them in xml and passing that to the database as an xml parameter to a sql stored procedure. It gets inserted in the database just as the user entered it.
The problem is the app that reads this data doesn't like these characters. So I need to translate them into the lower ascii (7bit I think) character set. How do I do that? How do I determine what encoding they are in so I can do something like the following. And would just requesting the ASCII equivalent translate them intelligently or do I have to write some code for that?
Also maybe it might be easier to solve this problem in the web page to begin with. When you copy the selection of characters from Word it puts several formats in the clipboard. The straight text one is the one I want. Is there a way to have the html textbox get that text when the user pastes into it? Do I have to set the encoding of the web page somehow?
[Code]...
I have a string of characters, but I would like to have a string of hexdecimal characters where the hexadecimal characters are converted by turning the original characters into integers and then those integers into hexadecimal characters. How do I do that?
View 3 RepliesWhen I swipe a card into Word Pad, I can see the information on the card. his information is a 39 character string of letters, numbers and other characters.I would like to be able to 4 consecutive characters of the 39 as a userid.Sample string of characters:;12345678GAM123456789GAM123456789GAM12?
View 6 RepliesI'm making a custom control suited for handling passwords. I have created a control that inherits from a text box and I have implemented a lot of things so far. But what i want to do now is create a system so that when a user types It will display his last character typed for a X amount of time.Is there a way to turn only selected characters into password characters and still be able to get the password text from the Text property ?
View 3 RepliesI wanted to know if anyone could tell me how to access the Click_event.I have a boarderles form with a panel control which has the Dock property set to fill and on the panel I have placed a Label also with the Dock property set to fill. I also have a timer running.How can I get code to execute in the Label1 click event.I've tried doing it by using the generic Click_event and also with two variations of the Click_event Handles parameters
'Alternativ 1:
Private Sub Form1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label1.Click
[code].....
There is newer code in a follow up post. I suggest using the code in the later post rather than the code in this one. You can still read this post though. When designing a user interface, one should be conscious of how many individual controls are required to implement the functionality. In some cases an initial design may begin with many buttons or textboxes (for example) but then further review of
the actual required functionality allows for a reduction in the number of unique controls.
But other times, there isn't a better way (which will still make sense to the user of the application) then to have a series of many repeated controls. So in the cases where one can be certain that the best UI implementation for an application will require the use of multiple copies of a given control, then it often becomes necessary to maintain some method of managing all of those controls at various points
throughout the application. Doing so typically requires that one build up some collection of controls which can then be accessed by index in order to work with any given control; but this can lead to a lot of clutter in the code file which handles these control's events. For instance there will be some kind of collection declaration, some recursive routine to find all of the controls of interest, and then any number of event handler methods with long lists of Handles clauses, or additional code loops to wire up the event handling for each control.
Purpose Since most of this functionality could be considered a requirement regardless of the type of control being managed, or its required functionality, it may make sense to wrap all of the control management functionality into a single class. And since our first requirement is a collection of controls, then a base collection class could be the perfect starting point for our control manager. There are a number of existing thread around this topic, with some recent (at the time of this writing) ones being:[URL]..In this, and related, threads I have posted examples of a simple TextBoxManager and ButtonManager control. But again, with so much similar functionality required regardless of the control being managed, it would be technically possible to create a generic ControlManager(Of T As Control) class which can manage any type of control.
[Code]...
So in summary, one can facilitate managing a large number of user interface controls by building a "control manager" class which both encapsulates the list of control instances, and deals with adding and removing defined event handlers for every control it manages. The generic control manager class itself can be inherited and extended into a more specific class on a per-application basis in order to provide more application-specific functionality. Reed Kimble - "When you do things right, people won't be sure you've done anything at all"
If I have the following ListView, how can I attach a SelectedIndexChanged event listener to the DropDownList so I can perform a command on the respective object? Imagine I have a list of new users and I want to add them to a usergroup by selecting the group from the DropDownList.
<asp:ListView ID="NewUsers" runat="server" DataSourceID="NewUsersSDS" DataKeyNames="ID">
<LayoutTemplate>
[Code].....
I have a maximized form that has controls at the top of it and a large DataGridView that is docked below all the controls. Its kind of like the Ribbon in MS Office. The controls cover about 1/4 of the screen at the top. I would like a way for the user to click a button to hide all the controls then automatically expand into the place the controls were so the user can view more data in the DataGridView and visa versa. For example, in MS Office Excel you can hide the ribbon by clicking a tiny button that has "^" on it.
I'm not very familiar with all the controls in Visual Studio so I would like to hear some recommendations. Is this situation ideal for a SplitContainer or ToolStripContainer or am I way off base here?
I've got a couple of these NumericUpDown controls I put on a form. Without describing too much about the form I basically want to update some variables each time one of these NumUD controls changes value. So for each NumUD I have a call to a Recalculate subroutine within their "changedValue" event.
There are actually two problems. First, if I initialize the "Value" property to something other than zero in VB2010 at DESIGN TIME it won't even open the form when I hit RUN. It gives me a "No Source Available. No symbols loaded for any call stack frame" error. The error box says "InvalidOperationException" was not handled. So if I try to set the initial value of the Value property to anything but zero of either I get this error.
[Code]...
I've been building controls for many years professionally and personally, but even back in VB6 days I just could not work this out. After all this time I remembered about it again.If I create a usercontrol/containercontrol and add one or more controls to the controls surface, I just cannot figure out how to access the controls at design time.
View 4 RepliesI want to draw a rectangle over some controls so that the controls are partly obscured.
View 2 RepliesI have a query about dynamically added controls to a form. I have a series of buttons which are created and added at run time. I have a two drop down lists and two buttons which are created at design time. Button 1 creates a series of buttons called "Test 1.x" based upon the selection of the two drop down lists. This works fine and am happy with the logic.However.... Button two should remove all the dynamically created buttons from the form.This does not happen. What does happen is that 50% of the buttons are removed starting with the first one. WHen checking the loop it only enters the loop half the amount of times that there are buttons. Very strange. When the loop is run repeatability it will remove all controls. Why will my logic not remove all the dynamically created controls at once? What is wrong with my logic?
I attach two code snippets and the .net file for your consideration.Button method which creates the dynamically created buttons from the two drop down lists and adds to form
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Count As Integer
Dim MaxHours As Integer
[code]....
i have created control array , now i wann to loop around as well wann to find which control has triggered the respective event my code :
[Code]...
The object browser in visual studio contains many controls and properties ....so is it possible to remember in mind all these controls. Whenever i am programming in vb 2008 and for reference i look at the examples on internet i always find some new controls,properties etc which makes me confuse.So i was wondering If by any means there is a way to remember all these controls
View 4 RepliesI have aspx form with several textboxes.They are populated with values from a table via retrieval of a dataview.If the row count for the dataview is 0, then I'd like to reset the values in all textboxes. How can I loop through all the textboxes and set a default value?I've tried the following, but no sucess.
For Each ctrl As Control In Page.Form.Controls
If TypeOf ctrl Is WebControls.TextBox Then
CType(ctrl, WebControls.TextBox).Text = ""
End If
Next
My first For Loop was using Page.Controls but it returned only 1 count.The textboxes are inside a tabpanel (ajax), so do I have to locate the tabpage and then find all it's controls (for each tabpage)?
How can I add controls to a form in code and set the properties of the controls using the With statement?Also I would like to know how to add a container control and then add a control to that container.
View 2 RepliesI have a slight problem With an enumaration of child controls on a form. The following code will not get but about have the controls that are on the form. The controls show that the count is correct but when it goes through the loop it skips over some of the controls. If you run it through the enumeration two or three times it will get all the controls a few at a time. The solution uses two forms, one that has the controls and the other that labels are made and displayed on. The Tx is just a index to add a number to the label.name and rename the label. So each label is identified seperately. This works for all the the controls that are seen in the for each loop.
View 11 RepliesI created a class that can take either usercontrol.controls or form.controls as a parameter,how can i pass either to that class? as a property or how?
View 4 Replies