I have a function to determine the correct time that appears to function correctly, but I must be making some mistake in the "calling" of the function. This is the first time I have tried use a component and it shows.
View 1 RepliesGiven the following code and link to SkyDrive VS2010 project, how would I create this vb.net project and access it in my c# application?
//the following c# project reference to function in vb.net is not working
string retval = ConvertUTF8_toASCII.UTF8_toASCII(stirngToConvert);
I am converting an old Vb6 solution to .net 2.0 in vs2010. I've been working in C# for about 3 years now and .net for 5. I don't recall having this problem in C#, but if I want initialize a readonly collection of DerivedControlFoo Is there a clean way to do it besides creating a sub to do it all off somewhere else? I'd love to be able to do it at the class level at the declaration for readability and simplicity.
View 1 RepliesCreate a DLL component for database operation and use created component in another project. Required methods, events and properties
a. Connect
b. Add
c. Delete
d. Save
e. Record navigation (first, next, previous, last)
f. Properties for all database fields
g. Events for validation of database fields.
I've created a component whose name I'd like to be able to change while editing in the component tray. I've added a Designer action for a name property, but now I'm stuck.
Looking at the property grid, I can see that the name property is parenthesised, indicating that it's not a regular property.
I want to make an numerical integration method with takes in an analytic function and integrate it over a specific interval. For the numerical integration procedure I want to use some procedures in nr.com. The problem is that these are programmed in C++ and they uses functors to pass a function to the integration method. How can I do this in VB 2010?
I want to initialize the function (i.e. set a=1,b=0 for function y(x)=a*x+b) and then pass the function to the integration method. Then when the integration method call the function it only calls the function with one parameter (i.e. x since a,b is already set)
What is the best way to do this in VB2010?I want to make a general integration method where I can pass any single valued function and integration limits.
I have just started using VB, and from what I have found so far it seems like the tools you have is
- to us a delegate for the function
- to use a lambda expression for the function
- send a pointer/adressOf
- to create a function class/structure and submit this to the function
As for now I am most inclined to create a function-class. But I am not really sure how.F.ex. I make different classes for each "uniqe function" I want to integrate, but how can I pass them to the integration function when I need to specify the argument type in the integration-function-call?This seems like a basic problem which applies to many Math operations, so I think it would be very useful to clarify this.
I'm trying to undersatnd the syntax of calling a funciton and it seem confusing when I'm using a web service in ASP.net. Maybe this question should be in an ASP forum, but it is a VB question. This simple web service allows you to type in your name and it response with an alert box with you name.
My question is, How can you call a function with 2 arguments when the function is only defined for one. I understand that the second argument is actually a method that handling the respons, but how can you interchange function arguments for methods and how do you know that there are methods for
Here's my call:
<script type="text/javascript">
function HelloWorld()
{
var yourName = $get('txtYourName').value;
[CODE]...
I am trying to convert a DLL function call which has the Callback function routine called within the DLL function call.The DLL function call signature is like this:
typedef void *HANDLE;
typedef HANDLE HACQDESC;
DECLARE_HANDLE (HWND);
[code]....
how to convert this DLL call to VB.NET and also how to create the callback function and send it as parameter to this function
call.
i wanted to ask how to make picturebox1 ,to which functions are already assigned, perform the same function as picturebox2 ,to which no functions are assigned.For example:I have already made picturebox1 and have assigned it alot of function like when play button is pressed then picturebox1.visible = true and when we press pause button picturebox1.visible = false. So now i decided to make a theme and have to remove the picturebox1 and want to allow the picturebox2 to havefunction of picturebox1.But when i disable the theme the function of picturebox1 should go back to picturebox1.
View 6 RepliesI'm trying to use a registered COM component in my ASP.Net web application. The application is written in VB.Net. I've added a reference to the Com component using the IDE.
Here's the
Try
Dim physicalToken As New PhysicalDevices2.PhysicalToken
Dim physicalTokens As New PhysicalDevices2.PhysicalTokens
[code]....
how to add FLV payer component in VB.Net..cz windows Media Player does't play the FLV player...
View 1 RepliesIts mine first post in this forum..I want to know that how to add FLV payer component in VB.Net..cz windows Media Player does't play the FLV player.
View 7 Repliesi got a error while using my app on other System class not registered i search for the solution and this just to register the ocx component i registered the component by using setup factory its working fine on XP but in Window$ 7 i got the same error what is the best way to register the component
View 4 RepliesIs there a good web browser component for VB.NET that has all the features of the regular one? This includes printing and progress bar support. I've tried WebKit.NET, but it didn't have progress bar support. I also tried xlurunner but it had no printing support. Is there another web browser component that has both printing support and progressbar support? I shouldn't have to omit features from my browser just to get a better rendering engine.
View 1 RepliesUnable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.VisualStudio.OLE.Interop.IServiceProvider'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{6D5140C1-7436-11CE-
[code].....
May i know where can download or get OCR .net component for free?? or the cheapest one??
View 2 RepliesI'm making some archeology, dealing with COM+I managed to enlist a simple COM dll as a COM+ component, so far so good.So I've got this 'foobar' com+ component, with it's interface, and the method I'd like to call.My question is then rally simple: how am I supposed to make a call to this component?.NET or VB6 answer is accepted (I have to check the component is OK, don't care about the client)
Edit (06/03/09): Well, I'm confused. so as to work properly, my COM+ component needs it's dll to be registered. Why not? But then, how to be sure I'm making a COM+ call, and not a COM one?
I need to execute a stored function in oracle or sql through vb.net. I created a command object. Depending on the database type(oracle or SQL) i am preparing the Command text as Select functionName(?,?,?,?,?,?,?,?) from dual; (For Oracle) Adding the parameter values of the function. Now performing the ExecuteScalar which is not working saying invalid parameter. This works with ODBC connection string. But ODBC doesn't with 64bit. My Requirement: Code should execute a user defined stored procedure by taking the values at runtime.
View 1 RepliesI'm currently working with a client's VB.Net code, which was developed for them by a small development shop a few years ago and which they purchased and have been maintaining and uprgrading since. This client's primary developer is out on indefinite (likely permanent) medical leave and I'm now filling in until they bring in a full timer (as I'm a contractor here). My current task is to add some functionality to a the VB.Net code they purchased. I'm finding practices and techniques in the code that absolutely baffle me and can't make the code do what I want. I'm starting to wonder if it's me and was hoping to get some thoughts on the code I've encountered.
For example: Setting a variable to accept the result of a function by calling the function with many parameters, clearing the parameters in the function, setting them to some value, calling another function with those new values, then never using the values returned by the functions. I'll add a code snippet in the first comment since this is already getting long.
Hi. what is the difference of sleep function and pause function (using timer) between a loop.
View 12 RepliesWhat does this error mean in VB6? Function or interface marked as restricted, or the function uses an Automation type not supported in Visual Basic.
I keep getting it when i call a particular method of a dll that comes with windows xp and beyond (in system32 called upnp.dll)
How can I call a function from inside another function and suspend the calling function until the called function is finished? I hope I can get some replies because I don't know how to ask the question and make sense:).
Anyway what I am trying to do in steps:
1. The user clicks button1 which triggers the click event.
2. From the click event I call a function
3. I then pop-up a form, that has instructions for the user to read.
4. After the user has read the form he will click the "Done" button and return to the calling function.
The problem is the the calling function continues to execute. I want to stop execution of the calling function until the users clicks the "Done" button on the instruction pop=up. I know I can use a msgbox but the instructions can be lengthly and does not look good in a msgbox.
I have tried the Call method with return in the "Done" button click but I can make that work. I also tried a goto statement but I can get that to work either. In the call statement I said call frmInstruction.show() and it got there but as I said the calling function continued to execute.
ive two custom controls, which are used to draw and edit etc...(like paint but customized....) i want to save their images with a single click....So im using the Getimageofcontrol function to do it....its code is below:::
Public Function GetImageOfControl(ByVal c As Control) As Image
Dim rc As New Rectangle(c.PointToScreen(c.Location), c.Size)
Dim i As Image = New Bitmap(rc.Width, rc.Height)[code].....
and the code to call this function for saving the images is simply.. ...
GetImageOfControl(pboxd).Save("c:78.jpg")
GetImageOfControl2(pboxf).Save("c:lp.jpg")
but the problem is that both the images have the same content....
I have a function where I am performing a lot number of database operations inside a Sub. The operation when called directly like:ExecProcess()
takes about 11 seconds to run.However, if I create a Delegate, and call the sub using BeginInvoke(), the very same process takes over 40 seconds to execute.Here's the threaded code:
Protected del As ProcessDelegate
Protected Delegate Sub ProcessDelegate()
del = New ProcessDelegate(AddressOf SELocal.ExecJob)
Dim cb As New AsyncCallback(AddressOf Me.ExecJobComplete)
del.BeginInvoke(cb, del)
Anyone know what may cause a function to take longer inside a new thread, rather than calling directly?
the best 3rd party component in vb.net.
The most important I want is listview / combobox
look at the following picture, which showing smart tag for DataGridView Now I'm creating new component and I want it to support showing some properties in Smart Tags, how to add the properties to the smart Tag?
View 2 Repliesi have just quick question (there's not much to elaborate from OP site). Have you any links or ideas, or experiences, what is to be done to class derived from System.ComponentModel.Component, in order to show its rectangle in designed form or control. I maybe satified with just making Component shapy. Anything else should be just game. But actually I have no idea how to draw component from its basics. Any idea or link, or bunch of links very welcomed! Even my capabilities of crunching google links are nothing here.
View 7 RepliesThere's a number of postings about IMAPI in .NET, including these:
[URL]
But I can't say they're straightforward. First link looks good, though its C# WinForms realization doesn't allow simple re-using in VB.NET project without conversion.I only need to burn a list of files to a CD/DVD and that's it. Any thoughts? Freeware/open-source is preferred.
I didnt know if this was the correct location to post this kind of question. My code is in C# however I am using the visualBasic. Interaction. CreateObject to connect to a OCX file. I notice that this works great for a while but if it continues to do its job for lets say a few days then I get and exception... "Can not create an ActiveX component." I am 100% sure that the ocx and dlls are registed correctly to the system.
View 2 RepliesI am using the following code to send an email thru Outlook 2003:
Dim omsg As Object
Dim oRcp As Object
Dim objCDO As MAPI.Session
[Code].....