VB 2008 Loops And Comparing To 0?

Jul 5, 2010

I've had no issues with this in C++, however, in Visual Basic 2008 (not sure about 2010), when I run a Do loop of any type, and run a comparison to 0, or even 0.0, the code loops a second time.

[Code]...

To my knowledge it should cancel after the 5th line, since the condition is satisfied. However it does not. Instead it runs the loop one last time.If I put in a comparison of any number higher or lower than 0, it works as it should, and cancels properly when the 5th line is written. So 1, -3, 0.0001, etc. works, so the problem lies with 0.

Now I do not know that much about the debugger, but it should be mentioned I'm running express edition, and I could not find anything that lets me see how each line compares. Nor, after an hour of searching online, could I find a single forum where this is answered (though perhaps that is due to how I worded my search).

If someone could explain to me why the comparison does not work as it should and loops a second time when comparing to 0, or even 0.0 (one person thought it was a difference in balance being double and 0 being an integer),

View 4 Replies


ADVERTISEMENT

Monthly Payment Calculation, For Loops To Do While Loops?

Oct 8, 2011

the purpose of the program is to display the monthly payments on the loan.My homework is to use do while loops instead of for loop.Here is the code for the for loop.

Option Explicit On
Option Strict On
Option Infer Off

[code].....

Now I'm having some trouble displaying the output using the do while loop, and I'm pretty sure it's a loop problem on my code. However, I cannot seemed to find out what's wrong. I looked at the examples of do while loop in my textbook, but I couldn't find anything useful to my problems of my program.This is the output for the do while loop.

Here's the do while loop code

Option Explicit On
Option Strict On
Option Infer Off

[code].....

View 3 Replies

Contain Functions(They All Have For Loops) Don't Work In For Loops?

Mar 6, 2011

When I use a For loop in a For loop the Contains Statement dosen't work! Even my custom one! I even tested mine and it works 100% And neither that or the String.Contains function work inside of For Loops And, I know both of them use loops to search through a string.

My function(It will atleast search once):

Function RealContains(ByVal load As String, ByVal needle As String) As Boolean
load = load.ToLower

[CODE].....................

View 10 Replies

For..Next Loops VB 2008?

Dec 7, 2009

have a problem where I have an application that allows someone to enter two integers. The app then displays all the odd numbers between both integers and all of the even numbers between both integers. There are two text boxes and two labels: even and odd. How would I code a For..Next loop for this type of app. The part where I get confused is what do I determine and how do I

View 18 Replies

VS 2008 For Each Loops Finished

Sep 21, 2009

I have a piece of my code that uses a for each to loop a certain amount of times depending on how many saved fields there are in an xml.

vb.net
'// Write an .html file ready for debugging
If (File.Exists("Working/" & textBoxCampaignName.Text & ".html")) Then
'// Do nothing the file exists

[Code]....

So the for each loops depending on how many nodes it finds in the ("/campaign/secondarySection") this works great, it loops accordingly, what i'm trying to figure out is a way for a messagebox to show once the loops are finished, i can't think of a way to find out once the loops are done.

View 1 Replies

VS 2008 - Two Nested For Loops And If Statements

Apr 1, 2009

I want to write two nested loops and inside them "two if statements" when I write an Else statement which has a messagebox saying that ID is not found.. it repeated many times depending on the for loops. I only want to be displayed once !!! but when I wrote my code like this (using exit sub), the message appears when the condition is right and appears when the condition is wrong. I tried to move this statement somewhere else but still I have problems with it.

With EMPDataSet
For I = 0 To .Personal.Rows.Count - 1
For j = 0 To .Work.Rows.Count - 1
If EMP_CPR = .Personal.Rows(I).Item("CPR") Then
txtName.Text = .Personal.Rows(I).Item("Full_Name")
[Code] .....

View 8 Replies

VS 2008 : Creating Asterisk Square Using For Loops?

Oct 26, 2010

I'm having a little trouble with this assignment for my 1341 Fundamentals class... Add another TextBox and Button to your program window; label the TextBox side: and change the Text of the Button to Print hollow box. Write code to clear the ListBox and then print a hollow square box of asterisks with sides of length equal to the input number. For example, if the number entered is 10, the output should look like

**********
* *
* *
* *

[code]....

You may want to use a For loop inside a For loop. Use a string to build each line of output before you send it to the ListBox. Your program should produce correct output even if the input is 0 or 1. Be sure to catch all exceptions and handle them intelligently. After this step, your program window should look like this.

NOTE: I had some trouble getting the desired output for the 10 and 4 user inputs to print out right... Rather than there being 2 rows next to each other, they should be spread apart by the number of asterisks on the top (and bottom...) thus creating the "asterisk square".

Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim first, last As Integer
Try

[code]....

View 3 Replies

VS 2008 Creating A Small Application - Loops ?

Mar 24, 2010

I am trying to learn by creating a small application to help my son learn math. It works but I know there are better ways of accomplishing what I need.

For example:

'Declare variables
Dim num1 As Double = CDbl(frmMath.txtNum1.Text)
Dim num2 As Double = CDbl(frmMath.txtNum2.Text)
Dim answer1 As Double = CDbl(frmMath.txtAnswer.Text)

[CODE]...

I imagine I would need something like a do while loop?

View 1 Replies

VS 2008 Nested For Loops - Going Through ArrayList And Finding Duplicates?

May 16, 2010

I have an arraylist of a "Doctor" class containing Firstname, Lastname,etc. Some elements in this arraylist may be duplicates of others. I am trying to iterate through the arraylist and search for duplicates. Once i find a duplicate i want BOTH duplicates put into another array and removed from the original array.

here is my function

Public Function createArrayOfDuplicatesAndRemove(ByVal st As ArrayList)
Dim duplicates As New ArrayList()
Dim i, j As Integer

[code]....

How could something be out of range if i start at the end and work to the front?

View 5 Replies

VS 2008 Threadpool - Web Scrapper Which Loops User Set List Of URL

Feb 29, 2012

I am doing one web scraper which loops user set list of urls. Lists can be huge and that's why I need Threadpool for it.

My code so far (Scrape code missing)
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim ThreadingEvents(20) As ManualResetEvent
Dim iCounter As Integer = 0
For Each item As Object In ListBox1.Items
[Code] .....

View 4 Replies

VS 2008 Comparing The Best?

Dec 8, 2010

i have 4 listbox and i named it

1. listbox40
2. listbox20
3. listbox5

[code]....

View 11 Replies

VS 2008 - Multi-thread Two Loops So That This Process Is Running At The Same Time?

Jun 28, 2009

It is my previous problem in vb6, its hard to multithread using vb6 so I migrate my codes to vb.Net.How can I multithread this two loops so that this process is running at the same time.Because when I start my second Loop, my first loop stop in executing. It will start again when my 2nd loop finished.

[code]...

I have 2 connected GSM Modem in usb port.That codes will send SMS in all contacts in my ListBox.

View 27 Replies

VS 2008 Arrays And Loops - Computing Average Monthly Rainfall

Dec 2, 2010

I need to create an console application that computes the average monthly rainfall, number of months with above average rainfall, and the number of months with below average rainfall, given the rainfall amounts for each month in a particular year. The program must read in and store in an array the monthly rainfall amounts entered by the user one by one.

So far this is what I have got
Const intMonths As Integer = 11 'Constant Month variable
Dim sngRainfall(intMonths) As Single 'Rain for the month
Dim intCount As Integer ' Loop Counter
Dim sngTotalRainfall, sngAvgRainfall As Single 'Total and Average Rainfall
[Code] .....

How to set this up properly and I am having a real hard time figuring out how to make the data go from this loop to another and add the data to the total.

View 15 Replies

VS 2008 Comparing Files?

Feb 28, 2010

How do I check if 1 file is the same as another file? For example, lets say I have to files. Both have the same name, but different contents. How would I "compare" the files and tell if they are the same or different?

View 3 Replies

VS 2008 Comparing Strings?

Aug 10, 2009

Hopefully this question will have an easy answer; I've tried searching for the answer myself, but I don't know what to search for (I don't know what you would call this).

Is there a way to compare a string to see if it matches more than 1 value?

[Code]...

View 6 Replies

VS 2008 Comparing Times?

Jan 8, 2010

How do I tell if the current time is between two other times? ie. is it currently between 8:00 AM & 4:00 PM.

View 9 Replies

VS 2008 Is There Another Way Of Comparing Byte?

Aug 21, 2009

I'm wondering if there is another way of comparing two byte arrays, that isn't going through each index of the array.[code]But that would give me false negatives. If I wanted the real results then I would have to add a Not.

View 4 Replies

VS 2008 Comparing 2 File Names?

Apr 13, 2012

This is the code I have in one button and I have 2 listboxes that will be filled with the info it gets.This code should compare 1 avi file to one jpg file and see if they have the same name. If YES then it will add the avi path to one listbox. If they don't have the same name OR the .jpg doesn't exists it will add avi path to another listbox.. But currently it is adding the avi name to both listboxes.

View 6 Replies

VS 2008 Comparing An Array With The DataColumn?

Dec 28, 2009

First of all - It`s my first post here so welcome I have a short question.I have an array with strings values, and a datacolumn with values of the same data type. The question is - what is the most efficient method to find values which are in the array, but aren`t in the datacolumn?

View 18 Replies

VS 2008 Comparing PDFs Programatically

Jun 14, 2011

I've got a project where I'm going to have to compare some PDFs. I've checked out a few SDKs, but I was wondering if anyone else has had to tackle this and may have some suggestions?

View 3 Replies

[2008] Comparing Two Strings If They Are Equal?

Mar 8, 2009

I have the following
Dim input As String
If e.KeyCode = Keys.Enter Then

[code].....

View 6 Replies

VS 2008 - Comparing Values Of Dropdown With String

Jul 10, 2009

I am making a app that reads options of a ini
dim config as new iniconfigsource("patch.ini")
dim test as string = config.configs("news").getstring("test")
Then I made a dropdown with options

I want my script to compare the values of the dropdown with the string readed from the ini
then uses it as selected value (the so called standard value) the one uc without clicking on the arrow if the none of the values match with the string value of the ini then it executes
dropdown1.selectedindex = 0

View 4 Replies

VS 2008 Comparing Combobox To Database Field

Jan 30, 2011

I have a combobox that displays saved names from the fullname column of my database. This works fine, all the items under the fullname column are added to the combobox. However, I also have several textboxes on the same form that also need to display data from the database, from the same record. So I was wondering if this was possible:

[Code]...

View 1 Replies

VS 2008 - Comparing Variables In Private Sub With Public Class

Nov 11, 2009

I have these list of RS-232 strings declared in my public class
Public Class TouchInterface
Dim WatchTVbtnCmd As String = "rs232command1"
Dim VolUpbtnCmd As String = "rs232command2"
Dim VolDownbtnCmd As String = "rs232command3"
Dim SystemOffbtnCmd As String = "rs232command4"
Dim RadiobtnCmd As String = "rs232command5"
Dim MusicbtnCmd As String = "rs232command6"

I then have this private sub. For the sake of this thread, what I would like to do is get the name of the label that was clicked which in the code below is already done, convert it to string (not sure if this needs to be done), this is also done in the code below. Next I want to compare the labelnamestring to all the variables in the public class to find out which one it is equal to and then disply that variable which should be my rs232 string in the message box. I have also added "Cmd" to the variable names above so I also need to work out how to add the text "Cmd" to the string to properly compare.

Private Sub Musicbtn_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles WatchTvbtn.Click, VolUpbtn.Click, VolDownbtn.Click, SystemOffbtn.Click, Radiobtn.Click, Musicbtn.Click, GardenVolUpbtn.Click, GardenVolDownbtn.Click, GardenRadiobtn.Click, GardenOffbtn.Click, GardenMusicbtn.Click, GardenMediaCenterbtn.Click
Dim labelname As Label = DirectCast(sender, Label)
[Code] .....

View 6 Replies

VS 2008 Adding Or Comparing Faster At Binary Level?

Sep 16, 2010

I was just wondering if a computer would add two numbers together (positive) faster that comparing two numbers.

I was thinking that it would be comparison (best case) due to the fact that the 0th bits could be different right off the bat. Where as when adding, moving from bit 0 to N is mandatory for addition.

But then again a computer may add/compare differently than I am imagining.

View 3 Replies

VS 2008 Authentication Server Fail At Comparing Strings?

Feb 14, 2010

Just wondering if anyone knows why does my authentication server fail at comparing strings? Also is there a better method of comparing strings than what im using below? User types in a textbox then sends text to server, server then checks it

[Code]...

View 4 Replies

VS 2008 Comparing Picture Boxes And Textbox Information?

Jan 8, 2010

I'm trying to make a Lottery program on visual basic 2008, but there's one thing that I am stuck with.Note: My explanation may be hard to understand, so if you would rather have me send you my code and see how it works, I'm fine with that. My code is pretty long so far, so I didn't know if i should post it on here.

My program has 6 picture boxes lined up horizontally, and has one text box underneath each one. There is a play and stop button on the bottom left corner.I've altered my program to have animations for the picture boxes. Instead of having a random picture picked, I have it so that each picture box scrolls through a series of 10 numbers when the user presses play.

When the player presses stop, the picture boxes stops scrolling, and random pictures are displayed in each box. (The picture is really just a black circle with a number in it).The text boxes below the picture boxes are for the user to put numbers in. These are the numbers they select for the lottery. Now this is my predicament. Since the picture boxes decides what the winning lotto numbers are, how can I compare the numbers in the text box to the pictures?

View 9 Replies

VS 2008 Database Search - Using SQLClient That Loops Though All Users In A Users Table

Dec 29, 2010

I've got a code using SQLClient that loops though all users in a Users table inside each loop i want to preform another search in the UserOrders table, thus doing a count of all orders.

I get this error

HTML

There is already an open DataReader associated with this Command which must be closed first.

Here is my code

vb.net UserLists.Items.Clear()
Dim connection As New SqlClient.SqlConnection(My.Settings.ConnectString)
Dim command As New SqlClient.SqlCommand("SELECT * FROM Users ORDER BY PersonName",

[CODE]...

View 3 Replies

VS 2008 - Make A Loop From 1 To 100 And Make It Everytime It Loops Display Incrementing Numbers To The Screen?

Aug 23, 2009

How do I make a loop from 1 to 100 and make it everytime it loops display incrementing numbers to the screen?

View 1 Replies

Comparing The 2 Images Without Actually Comparing Them Pixel By Pixel?

Mar 20, 2012

I have the code below on a timer( "b" is a bitmap )

If
Not (Clipboard.GetImage
Is
Nothing)

[Code]....

The problem is that it raises the event even if the picture didn't change.

comparing the 2 images without actually comparing them pixel by pixel (too slow to do the job)?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved