VB Program Works Fine When Stepping Through But Crashes When Ran With The .exe?
Aug 12, 2011
Problem: The excutable of the vb program crashes when trying to run but when I step through the program inside of visual studio it runs successfully.
Details: The program performs a winscp.com transfer from a ftp server and then takes the downloaded file and extracts the data from it before sending it to a webpage. The program also decrypts a des3 encrypted file which holds the login details for the sftp server and the webpage.
My Thoughts: I was thinking this could be something to do with the excutable jumping ahead of the slower transfer and decrypt functions thus causing a "file not found" exception to be produced and the program to exit. Lending to this if I slowly (aka spend 10+ seconds stepping through the code) move through the code it works just fine.
As requested Crash Messages:(I capture everything in exceptions and exit properly so no "crash" is reported but the error I get in my logs is as follows:)
1st run with standard test case:Could not find file 'C:UsersAdministratorDesktop..ILC2INFOENC.txt'
2nd run standard case (the file above was not deleted by my cleanup function either as it could not be found)Could not find file 'C:UsersAdministratorDesktop..ILCNETSL10663.csv'
Background:The first file that is found missing is the encrypted login information file while the second file is the winscp.com downloaded csv file.
View 1 Replies
ADVERTISEMENT
Nov 8, 2011
I am running a simple test app that opens an OLEDB connection, retrieves a single value, then closes. The compiled (console) app works fine, but running it from the IDE causes either a silent close (if it's a winforms app) or a crash of vshost32.exe if it's a console app.
The devenv is VB 2010 Express on Windows x64, but I have the configuration manager on the solution set to "Debug" - "x86".
Imports System.Data.OleDb
Module Module1
Sub Main()
Dim server As String = "xxxxx"
[Code]....
View 2 Replies
May 15, 2012
I have one tool which we developed on visual studio 2010. there are basically two parts of my project, one is UI part which i wrote in VB and algorithm part which is in C++ on back end. When we compile C++ part it creates a .dll which is used by my front end VB program.
Now my problem is little weird since i am compiling and deploying this tool on windows xp machine but some of the users are using windows 7 64 bit machines and after running the program for about 5-10 minutes, it crashes on windows 7 with following error
Not enough storage is available to process this command and when i view details of that error, i get the following description.
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ComponentModel.
************** Loaded Assemblies **************
mscorlib
[Code].....
i am completely clue less for this error since this program works fine on xp but doesn't work on windows 7.
View 12 Replies
Feb 2, 2011
Got Visual Studio 2010 Express Edition and have been building an app on Windows 7 64bit, then bought that app into work to continue work on Windows XP 32bit.When I load it, it will run first time happily but when I try and run it again it either says The Operation could not be completed or just freezes, crashes or does not responding, yes if I build the app to an exe file it works fine everytime?Due to the fact of odd errors etc I am really baffled and frustrated why it's so random?
View 23 Replies
Aug 5, 2010
I used autocomplete sub in one combobox keyup.It works fine in windows xp but got an error in windows 7. The error said:invalidargument=value of '-17310416' is not valid for 'length'.Parameter name:length.(-17310416 will change based on selection of combobox)
----
Public Sub AutoComplete(ByVal cbo As ComboBox, ByVal e As System.Windows.Forms.KeyEventArgs)
Dim iIndex As Integer
Dim sActual As String[code]................
View 2 Replies
Mar 7, 2011
I have a small project I'm working on and from time to time I show it to my friend. He and I both have Visual Basic 2010 Express installed.
[Code]...
View 16 Replies
May 20, 2010
I am trying to export data from a datagridview which works fine, but it crashes when pat_eid value is empty, as pat_eid has been set a primary key and cant accept null values in the database level.
So, I want to enter a message box if column(0) which is the pat_eid has an empty field. Please could you advise me how to do that.
[Code]...
View 14 Replies
Dec 8, 2009
I'm creating a db tool for automatic database repairs i have the following sql statement:
[code]...
Where the 'BrokenDbFile' is the location of the db where data has to come from and the 'sqlString' = the access statement.it gives a error when i put it in a try the exception is of type OleDbExceprion and de message text is "De instructie INSERT bevat een syntaxisfout" in Dutch Where it says that the syntax of the INSERT INTO is not correct. but when i paste the string from my inteli snce into access it works fine.
View 11 Replies
Jun 23, 2010
I have VB.Net application that has worked fine for years on XP and Windows 7. For some reason the last update I put out does not run even the simplest VB commands.Simple Environ() fails.I have tried putting simple VB commands onto a MsgBox on the start of the app and everything raises an error. I have no idea what is going on! The exact same app runs fine on Windows 7 clients. All the XP machines including a fresh XP virtual machine with the .Net 3.5 framework even gives the errors. No VB commands are working. I thought maybe something happened to my vbproj files, so I copied an older one from a couple weeks ago when things worked fine and it still does not work.
View 2 Replies
Jul 21, 2011
I receive this error: [code]whenever I run a query via a visual studio project in vb.net. If I run the same query via Open Office Base, it takes a long time but it works. How do I go about troubleshooting whats causing this?
View 2 Replies
Mar 15, 2012
The code works fine when I run it locally, yet as soon as I have uploaded to our dev server it doesnt run, but also doesnt error.I did some research and found that I should have the thread impersonate the WindowsIdentity, which I have done but still the thread does not work, I also tried increasing the max threads in IIS and still nothing.Im running IIS 7.5 on Windows 2008 R2.The method being executed on a new thread is in a class in the App_Code folder and looks like:
Public Class RosterEmailer
Inherits System.Web.UI.Page
Dim thisID As String
Dim thisName As String
[code]....
View 2 Replies
Oct 28, 2011
I have been scouring for examples to give me some idea on what I need to do to create a skinable scrollbar. The only thing close that seems to work like I need is Cool Scrollbar The problem I am running into is on the designer...when I move it, resize it, or change the direction of the control (ScrollbarLayout), it seems to want to re-name the class the item is an object of from CBar to cbar.CBar. Once I position and align it properly to check, I can go through the Form1.Designer and simply remove the cbar. and get no errors. When I run the program, it is fine, so this is telling me that there is something wrong with the movement in the class...
[Code]....
View 5 Replies
Jul 20, 2012
I tried to use bmp.save to create some thumbnail, it works fine for a while then stops working,how to troubleshoot the problem? the code doesn't generate any error:
Dim bmp As Bitmap = WebsiteThumbnailImageGenerator.GetWebSiteThumbnail(address, 800, 600, width, height) Dim ScreenshotPath As String = Request.PhysicalApplicationPath + "Screenshots" Dim ScreenshotName As String = UserAccountDB.GetUserFullNameByUserLogon(User.Identity.Name).Replace(" ", "_") + Now.ToString("yyyy'-'MM'-'dd'-'HH'-'mm'-'ss") + ".bmp" bmp.Save(ScreenshotName) imgWebsiteThumbnailImage.ImageUrl = "~/Screenshots/" + ScreenshotName
View 1 Replies
May 3, 2011
I have created a query method for my tableAdapter in the dataset designer. I typed the command text manually, but tested it in the query builder after I got a Constraint Exception when debugging. When running in the query builder via 'Execute Query' I get exactly the results I expect. When running the application I get this exception: "Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints." I tried temporarily setting my dataset's EnforceConstraints property to FALSE but still get the same exception. I can't understand why the Query Builder would return the correct datatable but running the app would not. Is this a bug?
View 3 Replies
Jun 6, 2012
Here's the code that I have:
TextBox3.Text = ""
WebBrowser1.Document.ExecCommand("Copy", False, vbNull)
TextBox3.Paste()
TextBox1.Text += TextBox3.Text & vbCrLf & vbCrLf 'This code just adds the pasted text from one textbox to another.
Question:
After I install and run the application on my main computer that I coded this app in work, but when I go to transfer/install it onto my laptop, the code will NOT copy and paste from my webbrowser to my textbox?
View 3 Replies
Jul 2, 2010
I seem to have a problem with an application i made. I hope you can help me with this as it has puzzled me for awhile now.
[Code]...
View 7 Replies
Nov 22, 2010
The following works:
string connectionString = "Provider=Microsoft.Jet.OleDb.4.0;Data Source=" + str_excelFileOnLocalMachineInReports + ";";
connectionString += "Extended Properties=Excel 8.0;";
OleDbCommand myCommand = new OleDbCommand("Select * from [pFACTData$];");
[Code]..
But as soon as I change any of the numbers to doubles (e.g. 23.32457) I get a crash (it doesnt crash on the insert, it crashes on the next one:)The INSERT INTO statement contains the following unknown field name: '23#2345'. Make sure you have typed the name correctly, and try the operation again.
View 2 Replies
Jun 1, 2011
We have a WCF service hosted in IIS that currently calls a VB6 DLL to do part of its job. This works fine, but we can't deploy the service to a 64-bit target environment without configuring IIS to run it in a 32-bit worker process.I am currently investigating ways around that restriction. Porting the VB6 DLL to .NET is not possible for various reasons, so I created an ActiveX EXE wrapper around the DLL in VB6, so that the service can run in 64-bit and the VB6 parts in 32-bit.
When I tested the service I got this error:
Type: System.UnauthorizedAccessException
Message: Retrieving the COM class factory for component with CLSID {9AE7303B-D159-43F6-B1A5-52D297581820} failed due to the following error: 80070005.
After some Googling I found that this is due to either:
Calling an MS Office component
DCOM permissions not being configured
NTFS file permissions not allowing read/exec access to the IIS worker process identity (ASPNET in my environment)
Of these:
Definitely not applicable Also not applicable; I am not hosting the EXE in DCOM or COM+, just a simple COM out-of-process activation
This looks likely; however, I checked the permissions, and NTFS reports that the Users group (which ASPNET is a member of) does indeed have read/exec access to the file I tried calling the EXE from a unit test fixture, which is executed in my admin-level account rather than the IIS worker process account, and it worked fine, so the error is definitely something to do with permissions. I'm not sure what to do next.
UPDATE:The IIS virtual directory is configured for Anonymous+Windows access; the WCF service uses only Anonymous authentication, the Windows authentication is for the VS debugger. Task Manager reports that the aspnet_wp.exe process is definitely running in the ASPNET account.I explicitly granted Read and Execute access to the ASPNET and IUSR_<machine> accounts on all the COM exes and dlls involved. This made no difference.
I explicitly granted Local Launch and Local Activation access to the ASPNET and IUSR_<machine> accounts on the relevant interfaces in the DCOM configuration. This made no difference either.Keep trying to get this working somehow.Go the whole hog and host the EXE in COM+.Give up. Tell users that the WCF service must be configured to run in a 32-bit app pool on 64-bit Windows.
View 1 Replies
Jul 21, 2011
I have mpd server working in Linux machine. Code works fine until there are spaces in directory name.
How can I handle spaces?
CODE:
View 6 Replies
Jun 30, 2010
[code]The two Location lines throw errors but the Text line works fine. I've played around with this until I'm blue in the face but can't get it to compile.
View 4 Replies
Jun 3, 2011
So I wrote a VB.net project in Visual studio.I have a scheduled task that is set to run the program every morning at 10AM. If I use windows explorer and double click the application, it runs fine.If I open task scheduler, open the task properties, and browse to the application, then choose run, the program fails, due to Runtime exceptions.I know I have the path entered correctly, since I can debug the instance when it crashes from the task scheduler. VS2010 pulls up my source code.The exception is System.IO.FileNotFoundException, remember, it works fine when I double click the app. If attach a debugger to the process after it is executed from the task scheduler, I can then restart the debugger, and Voila!, The application runs fine.
View 1 Replies
Jun 15, 2011
I'm developing an application in vb.net. You drag any type of file onto the exe, and a window pops up with some options for the file, then it saves the file to a different location, works some SQL magic, etc. It works great for the most part. The only issue I've found is that if the path of the file contains any spaces, the application will crash immediately with the error window:[URl]..I'm using: Private filename as String = Command$ This is located right inside my form's class declaration, not within a sub/function.Without this line, my program runs fine (although useless, without accessing the file).I've also tried (I think this was it, I don't have the code with me at the moment): Private filename as String = Environment.CommandLine So, in vb.net, is there a way to drag a file onto an exe and use that path name, even if there are spaces in the path name?
View 2 Replies
Nov 27, 2009
Having a bit of a headache with stepping through a program.
I changed the Keyboard to VB6 in Tools > Options with the same result.
He's what happens.
* I put a break point on Line2. The app stops there and so far so good. * I press F8 or F10 or F11 (tried everything) and the app returns an error on line8 instead of stepping to Line3.
The error is obvious, but I want to step through my program 1 at a time.
1: connData.Open()
2: strSQL = "123"
3: strSQL = "123"
[Code]....
View 5 Replies
Apr 19, 2011
I have a problem with a streamreader in visual basic 2008.I am updating a database from text files on an ftp server. The streamreader works fine until the file is more than 100,000 bytes long.It reads until it reaches this point and then just ends. No error message, it just reads to this point which happens to be 2 fields out of 6 in the database stream. My question is - does the streamreader have a limit? And if so what is a workaround?
Dim connString As String = "Data Source=" & pDataBase
conn = New SqlCeConnection(connString)
Dim strQuery As String = ""[code]......
View 4 Replies
Jan 30, 2009
using VS2008, targetting framework 3.5I have a rather complex UserConrol which does some of its own rendering.I display this UserControl on a form.Opening that form in the Designer creates an instance of the UserControl in the Designer, which tells me a NullReferenceException is occurring in one of my rendering methods.I have attempted to correct this by making alterations to the UserControl's default constructor, but have not found success.
View 1 Replies
Oct 14, 2009
See
Public Class Form1
Dim sql As String
Dim conn As New OleDb.OleDbConnection
Dim da As New OleDb.OleDbDataAdapter
[CODE]...
The problem, The INSERT statement works fine in the form load but not in the button click event?
View 29 Replies
Oct 24, 2011
I have a small vb.net application that fires a crystal report through crystal viewer.
The report uses an ODBC connection provided by 32-bit software accounts package, which is installed in the ODBC 32-bit This all works fine on 32-bit XP and 32-bit Win7 with no problems, When run on a win7 64-bit machine the application launches ok, but when it comes to running the report, it prompts for a database logon box for the odbc connection.
When the report is run seperate on its own, on the exact same pc through crystal reports desginer it runs fine, Its almost like the application is not picking the 32-bit ODBC set up is it the case that the connection needs to be coded rather than using the report connection,
View 3 Replies
Jun 6, 2012
I wrote this VB program to be able to throw a device we developed into programming mode where we use an ATMEL Flip installer to upload new firmware. I can program one device after another running the application off of Visual Studio Express 2010 or Visual Studio 2010, but when I go to publish this file and run it on another machine, it becomes unstable and crashes after each upload. On those same computers if I run the raw unpackaged program under Visual Studio Express, the system does not crash, and I can program devices repeatedly.
View 5 Replies
Oct 15, 2011
Public Class Form1
Private Sub Button1cmdRun_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1cmdRun.Click
[Code]....
Whenever I run the program and I enter text into the label the program crashes. When I type in a negative number the message box works.
View 7 Replies
Oct 14, 2011
Public Class Form1 Private Sub Button1cmdRun_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1cmdRun.Click ' Variable declaration & initilization Dim hour As Integer Dim minute As Integer Dim second As Integer ' Validation If IsNumeric(txbTotal.Text) And txbTotal.Text Then >= 0 Then ' Total number of seconds Dim totalSeconds As Integer = CInt(txbTotal.Text) ' Calculation hour = totalSeconds 3600
[code]...
Whenever I run the program and I enter text into the label the program crashes. When I type in a negative number the message box works. A number like -45 worked and a message show appeared, whilst a string like 'bob made the program crashed.
View 3 Replies
