i want to add a key in the HKEY_CURRENT_USERSOFTWAREMYAPPLICATION under windows 7! Unfortunately , i cannot do this ? How am i going to add info in the registry using Windows 7 without being an administrator ? Even with administrator rights it does not add a thing!
View 4 Replieswill an program built on windows 7 using vs 2008 or 2005 have the compatibility with windows xp or vista
View 5 Repliesi have created some shareware applications. I implemented the following mechanism for piracy protection. Before Windows Vista and Windows 7 i did write a dll file to the System32 folder with an encrypted license key. Also in the Registry under HKEY_LOCAL_MACHINE i inserted a registry key.
The problem is that with Windows Vista and Windows 7 due to the User Account Control (UAC) this is denied.
I want to ask : what other mechanism can be implemented ? Where should i store the encrypted key file and the registry key.
I want that the application can be installed for all users of a computer only once.
If i stored the key in the user's application data directory then another user could easily just install it under another user account. Also i do not want to put the key file in the application directory because that would be too obvious.
note that i create the registry key with my application and not with the installer.
I have come across to develop an application for Windows 7.My program has one setting file and one LogFiles folder under the same folder as EXE. User will change some setting from Program and the values will update in this file. If there is an error, error detail will log in Logfiles/ todaydate.txt file.(Later I discovered/learnt that I should not edit/write the files to Program Files/sub folders.)So, now I'm trying to move these two files to another location. After searching a few on Net and I got the following result.[code]When I make Setup project for my application, I have to put the Setting file under one of these location.And what I found was, I only has a choice of "User's Application Data Folder" which is equivalent to My.Computer.FileSystem.SpecialDirectories.CurrentUserApplicationData.If i put Setting.ini file under this folder in Setup project, it gave me an warning of "File 'Setting.ini' should not be installed into a User's Profile folder because it may not be available to all users."
View 4 RepliesI am trying to write a VB application that will talk with USB Printers. After seaching far and wide, I have come across a wiki that I think may be what I am looking for, but the examples are written in C, which is absolutely not my thing.I would like to use the functions SetupDiGetClassDevs, SetupDiEnumDevice Interfaces and SetupDiGetDeviceInterfaceDetail included in setupapi.dll to retrieve the devicename of the printer so I can then call CreateFile() from kernel32.dll to get a handle on the printer I would like to use. I'm not sure if the steps I've mentioned are the right way to retrieve the device name (hardcoding in a device name doesn't seem to work, so I'm assuming this is the only thing I can do). The main problem I am having with those functions is that I do not know how to call them. As I mentioned, I referenced a wiki, which can be found here, but I do not understand the parameters and structures etc.. that I need to pass in order for this to work. Can someone please explain the parameters (namely where to get the first parameter for SetupDiGetClass Devs), how to define the structures etc...If it matters, this is all the code I have for this task
View 3 Repliesi have a vb.net program compiled in windows 7 (32bit) but then when i run it in windows 7 (64bit) the doesnt work and it can't the Microsoft.Jet.4.0; What should I do to run the program?
View 3 RepliesI have a program written in VB 2005, the computer used to write the code was running in Windows XP and 32 bit Pentium D. Now, my boss want to buy a new computer to run the program, and he wants the one that comes with Windows 7, 64 bit. Can my program run in the new computer without any problem? Or, is there anything that I need to change for it to run there?
View 12 RepliesIs there a any code to create the windows service in VB.net 2005 that you can pass on. I am actually trying to make a Windows service which will query SQL as well as Oracle database using procedures. This service will keep running until it is manually shutdown. This is my first windows Service I am writing in VB.net.
View 1 RepliesSince VB 2005 express does not really install properly in windows 7, here is how to get it to install and make it work right. It's very simple.
1. Right click on the VB 2005 express installer file and click "Properties" in the menu.
2. Now click the "Compatibility" tab.
3. Check the box that says, "Run this program in compatibility mode for:"
4. Click the drop down menu and select "Windows Vista Service Pack 2. (I haven't tried service pack one.)
5. Now check the box that says "Run this program as an administrator" and click "Apply," then "OK"
6. Run the installer.
Wait until VB 2005 express has installed to do these next steps.
7. Make a desktop icon for VB 2005 Express
8. Right click on the VB 2005 express icon and click "Properties" in the menu.
9. Now click the "Compatibility" tab.
10. Check the box that says, "Run this program in compatibility mode for:"
11. Click the drop down menu and select "Windows Vista Service Pack 2. (I haven't tried service pack one.)
12. Now check the box that says "Run this program as an administrator" and click "Apply," then "OK"
VB 2005 Express should now run on you Windows 7 machine! (Yipee) Notice that it is necessary to repeat the same process for the installer file as well as the actual VB program becuase they are two different files and need to run in compatibility mode.
I have a program that modifies the boot.ini on windows XP.However the problem is windows Vista went to the BCDEDIT utility the boot.ini was eliminated. The BCDEDIT tool is a command line tool.IS there a way to program vb.net to use bcdedit and pass several different commands to it so that I can make the same changes in Vista I want to change to these values from there defaults
Timeout =1
and
noexecute = AlwaysOff
How can I do this ?
I need to check to see what version of windows is running. How do I do this from VB .NET 2005? and how comprehensive can I get... can I also check for Vista and Windows 7?
View 9 Replieshow can I get the name where windows is installed on a remote pc?
View 2 RepliesI am using Vb 2005 to develope a windows service, i have completed a long flow,but at the end i am having a little problem.When i use process.start("abc.exe"), it didnt show me But when i have a little more analysis of the problem i noticed that its running in background by making windows service as its parten process, So it means process runs but as a service how i can show that application on desktop?
View 3 RepliesI will be googling this but in case I don't find it easily, here is my question - how do you install a windows service that you've developed on your own PC to a server? Is there an option to produce the package (I thought it was an msi file) which you can run on the server?
View 1 RepliesThe app Im working on is dunning on an embedded xp machine. It recieves input from the serial port from an industrial process, and then a backgroundworker class calculates and updates the single form GUI with the results from the process. Very simple.Now, the customer want to allow automatic download of log files by an USB memory. The process should work like this:
1)User plug in an usb memory
2)SHow a virtual keypad (touch screen) where the user enter a security code
3)If code ok, show a 3 choice screen, if not ok show error message and allow the user to try again.
4) If user choose the "export all" button, this choose form will close and i display another form with a progress bar that show how all files are copied to the usb memory. When this process is complete, I will display teh form that says "remove the usb memory and press ok to restart the application.
As you see here lots of forms are created and disposed based on user choices. My biggest issue here is that I have no clear design pattern to work from.For example.. should I have this "chain" in the main gui form, or should I let each form create the next form. For example on the "select action" form, when I press export, should this form create and show the "copy progress" form, or should all forms be created and destroyed from the main gui form?
Also, such an issue like with the password. I put it as a constant on the main form, to avoid "magic numbers" in the code. And then I ran into problem because the "keypad" form is created on another thread and I can't access the costant on the main form, so I got a cross thread exception.Everything starts when an USB memory is connected. And the OnConnected eventhandler is running on a different thread than the main UI thread. how to design this chain of window creation/deletion is greatly appreciated. I show all forms with the SHowDialog because I dont want the user to be able to close the form unless he/she presses a button. And not by accident press somewhere else.
I developed a application using vb.net 2005 and sql server 2008 for windows but i want to run this application on one of the client which is linux. means : windows server 2003 on which database is install. Five client machine is Windows Xp on which application is running ok they have two machine on which linux is loaded. Now I want to run the same application on linux machine also Guide how to do this..
View 3 RepliesHow to run windows application in mac system
View 4 RepliesI'm calling a method and passing Time and TimeOfDay to it, then in my method, I'm populating a datagrid of entries. I'm not actually trying to set the System time, just record read it but I'm getting an error saying 'Insufficient permission when setting system time'. This didn't occur in XP, but does in Windows 7.
[Code]...
Why can't I right click on the taskbar icon and pick from recent projects in VB.NET, but I can in VB6?
View 3 RepliesI have created a Windows Application using VB dot Net. It has many Forms. The user shall be able to open many forms at a time. I want to provide a "Window" menu functionality to the existing application. Whenever any form is opened, the menu should add the open-form and when it is closed, it must be removed from the Window menu. The functionality should be similar to any Word file's Window functionality.
Active window must be tick marked.
I'm creating a program to stop a particular windows service.This windows service was also written by me.The service will watch a folder and cut and paste the file to another location.The service was running OK.And I have another (TESTING) console application which will try to stop this service only. (I'm doing testing!)However, the app failed to stop the service.
Here is the code i use to stop the service.
VB.Net
' AutoMover is my windows service name.Dim controller As New ServiceController("AutoMover")controller.Stop()controller.WaitForStatus(ServiceControllerStatus.Stopped)controller.Start()
The debug line stop at WaitForStatus because the service didn't stop.Here is the Stop function from my windows service
VB.Net
Protected Overrides Sub OnStop() GC.Collect()End Sub
After a few seconds (may be 1 minutes or 2), there is an error message box pop up from window and said the following error msg.' Auto Move is my service Display Name.Could not stop the Auto Move service on Local Computer.Error 1053: The service did not respond to the start or control request in a timely fashion.If I click Stop from Services.msc, it stop successfully. Strange!!
I'm creating a program to stop a particular windows service.This windows service was also written by me.The service will watch a folder and cut and paste the file to another ocation.The service was running OK.And I have another (TESTING) console application which will try to stop this service only. (I'm doing testing!)
VB.Net
' AutoMover is my windows service name.Dim controller As New ServiceController("AutoMover")controller.Stop()controller.WaitForStatus(ServiceControllerSta
[code].....
i have a form that need to be 8 form like the first one, see my code :
If innsatsForm.innsats = 5 Then
Dim clform5 As New tellerForm
clform5.Text = "Innsats / Lag 5"
clform5.BackColor = Color.DarkOrange
[code]....
how to change between clform5 and clform6
How do i use the temp folder...?or any folder...so that no one delete the file until app is closed!I want to store some files while my app is running!
View 3 RepliesI write program for Windows CE that should work with Serial ports. I use object System.IO.Ports.SerialPort. Everything works well but when I close program and open it again, I receive error: Port is in use! At the end I write:
port.close()
port.dispose()
And If I add this:System.GC.collect() than everything begins to work But problem is that computer gets stuck when garbage collector is called for each port. If I tried to use collector somewhere else, it doesnt "collect" ports and they look like used if program starts again.
I am just wondering if you people will be able to help me make my application autload on windows startup (Like Windows Live Messenger does), I have been researching on the internet and I cannot find anything for it.
View 5 RepliesThe main problem is when I try to type code for Visual Basic 2005 onto my new Windows 7 computer ( using the Virtual XP set up) it is very slow. There is a big delay when I type a word and it appears.
View 2 RepliesI want to start the Windows calendar (c:program fileswindows calendarwincal.exe) minimized from my VB 2005 app. I have tried the windowstyle set to every option (including hidden), and it still comes up full screen. I tried it in VB6 using shell, then appactivate, and then using sendkeys, and it gives an "access denied" error.
View 4 RepliesI am teaching myself how to work with Visual Studio and adding windows media player so I can play a song but when I follow the code that is the the MSDN under " How to play audio files by using Visual Basic .NET or Visual Basic 2005 I can only get as far as this statment
AxMediaPlayer1 As AxMediaPlayer.AxMediaPlayer I get this error "property access but assign or use its value" I have no clue what it means and I have looked at several treads on MSDN but am still a bit confused as to what I am doing wrong or what I need to do to make this work Private Sub loadButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles loadButton.Click
[Code]...
I have a main form having a comobox with categories populated in it. for adding new categories I have a button1 on this main form. On button1 click I am creating and showing a new form2 for adding new category. I want this new added category in my main form combobox on closing this new form. I have checked mainform_activated even but it is not fired on close of form2.
View 2 Replies