Wasn't really sure what to name this thread or how to explain it. I have a form with a dateTimePicker control on, textbox for days, button and label, when the button is pressed I'd like the amount of days put into the textbox to be added to the value in the datetimpicker then the result being put into the label.
E.g. Select 26th November in the DTP, then put 6 into the textbox, press the button then have 2nd December come out in the label. I've tried a few things but all fails and just gives me back the original value in the DTP.
I've got a form with following controls: Two Datetimepickers Two Buttons One TextBox One ComboBox The idea is adding and subtracting dates using Datetimepicker contols... I found codes for doing Dates Calculation but is'nt quit correct;for example: if i want to add 21years from today the result will be: sat 30 Aug 1930 The Adding Codes on comand button: Private Sub BTNadd_Click(ByVal sender As System.Object, ByVal e As
If DateTimePicker1.Value.Year <= DateTimePicker2.Value.Year Then 'dtp2 = expiry date If DateTimePicker1.Value.Month <= DateTimePicker2.Value.Month Then MsgBox("Expiry Date Correct!") Else MsgBox("Expiry Date incorrect!") End If End If
How would I get it to check the date? Datetimepicker1 is the current date, while Datetimepicker2 is the expiry date.
I have a program created that allows users to enter reminders in a text box, where they choose a date on a DateTimePicker, and hit an "Add" button. This then adds the date and time the reminder was created to a table in SQL Server 2005.However, when they click the "Add" button for a reminder to be added on today's date, its only adding it to tomorrow.
I am programmatically creating a Tabcontrol and adding Tabpages to it. To each Tabpage, I am adding 2 Pictureboxes (Testpicture1 and Testpicture2). The amount of Tabpages depend on the amount of frames in my .tif file. So, each picturebox holds an image (frame) from my .tif file sequentially from˜0 to totalpages. All good so far. I can click each tab and correct images are displayed in correct order. The problem is that when I drag a control (picturebox) and try to add it to Testpictue1 or Testpicture2 it does not work correctly. At first I thought the it didn't work at all, but when I checked each Tabpage I have found that all pictureboxes got added (draped) to my last Tabpage, in this case Tabpage4. So this is puzzling. Even though each Tabpage holds 2 Pictureboxes and they display the correct images yet the picturebox is added to the Testpictue1 or Testpicture2 of the last created Tabpage? [code]
I need to add an X button on my tab headers so that the user can close the tabs easily and intuitively. I want it to work like firefox tabs, where you can press the X on any tab to close it at any time. Is there any way to do this?
I am trying to add a picture box to my form that contains an animated progress gif, in a separate thread, but I can't seem to get the picture box to appear on the form. Here is my form
I have added a freshly compiled ObjectListView.DLL to my VB.NET project and I've added a ObjectListView control to my form. But, thus far I have been unable to do anything with it except make it throw exception errors of various kinds. I know I'm not supposed to use it using the same syntax that ListView uses, but the documentation for this control is as well developed as MSDN's for ListView--which is to say vague to nonexistent. I can't use ListView because it gives me no control over row height and cell padding. Both need to be minimal, but with the defaults used by ListView, you could move in and and make a living between the entries. Too much space. I need things compact because the application I'm developing needs all the real estate it can get for other purposes.
I found a custom ListBox that, strangely doesn't have an InsertAt method and I would like to add one. The custom ListBox uses an object instead of just a list of strings like a normal ListBox. I was curious what the logic behind inserting a new item at a particular index would be.The only thing I could come up with was add the new ListBoxItem at the end, then using the specified index, I could either keep moving ListBoxItem objects to the bottom, with the Add() method, from that index till the ListBoxItem at that index equals the one added, or I could use that index number in a "calculation" till I know I've moved the correct number of objects.
I am very new to Visual Basic, and I need to add items from my database to the ListView control. I have a table in the database called tblChannels that I would like to draw the information from and populate the ListView control in VB, in the form of a column. I currently am unsure about how to go about doing this. Previously I have created combo boxes that draw the information from the database, but trying this method for the ListView does not work how I want it to.
Does anyone know of a way have the PropertyGrid control display a NumericUpDown instead of a DropDown box or text box? One of the properties that I need to capture is an integer and I'd like the user to be able to spin up or down to choose a value instead of typing it in.
I have not been able to find a way to get the datetimepicker with ShowUpDown= True and custome format set to h:m tt to increment in 15 min intervals. I have been able to set it when the form is loaded to the nearest 15 min increment. But I need it to increment in 15 minutes units.
This can be down with the NumericUpDown control, but I need two of them one for the hour and one for the minutes and set it's Increment property to 15. Again I can set it to adjust to correct hour and the nearest 15 min. And of course I have to watch and when I go over 60 reset to zero and increment the hour control.
The users will be burly oil field workers using a Panasonic Tablet PC with a stylus in the field. It seems that it would be easier if I could increment the datetimepicker in 15 intervals.
Basically, I have a form. It has two datetimepickers which both have the format of "dd MMMM yyyy hh:mm:ss"..However, I want to be able to do some calculations with them and return a format of: "ddd dd MMM yyyy HH:mm:ss" with the milliseconds but not sure how to show the milliseconds. And how to do the calculations..A date and time gets entered in the datetimepicker of "18 November 2010 02:59:07"And in the other one the data may be: "20 November 2010 01:59:07"..I want to be able to find the difference between them - including the milliseconds, seconds, minutes, hours, year, month and date. etc..I have looked through the internet however, nothing uses a datetimepicker [code]I currently have this, it returns the number of different fields, but not sure how I can convert this into a readable time/date.
I'm creating an Microsoft Office 2010 add-in ribbon with a bunch of controls on it. I am able to add things like buttons, TextBoxes, and Labels. :-) I am not, however, able to add the one control I need, which is a DateTimePicker.
I need to create a new DateTimePicker control supporting the Hijri and Hebrew calendarsI tried the DateTimePicker on "windows server 2008" and it was working very fine without any code change for Hijri and Hebrew calendars but on "windows XP" it works only with Grgorian calendarso i need to create a new DateTimePicker that implements the following calendarssystem.globalization.hijricalendar and system.globalization.hebrewcalendari do not know what is the best way to design and implement this item
I need to create a new DateTimePicker control supporting the Hijri and Hebrew calendars I tried the DateTimePicker on "windows server 2008" and it was working very fine without any code change for Hijri and Hebrew calendars but on "windows XP" it works only with Grgorian calendar so i need to create a new DateTimePicker that implements the following calendars system.globalization.hijricalendar and system.globalization.hebrewcalendar i do not know what is the best way to design and implement this item,
I am a new one to vb 2005. I dont know how to filter the datagridview with the 2 datetimepicker control one for start date and another one for end date. I want to search the dates based on the datevalue of the data in one coloumn.
I need to create a new DateTimePicker control supporting the Hijri and Hebrew calendars I tried the DateTimePicker on "windows server 2008" and it was working very fine without any code change for Hijri and Hebrew calendars but on "windows XP" it works only with Grgorian calendar so i need to create a new DateTimePicker that implements the following calendars system.globalization.hijricalendar and system.globalization.hebrewcalendar i do not know what is the best way to design and implement this item?
If you enter 11 for instance into the year component of the date then tab off the control the text returned to the validation function is the text before the year was entered rather than the new text.The problem can be overcome by making the control invisible then visible. This has been the case since Visual Studio 2003, it would seem to be a bug.
I am having the following problem, when the user wants to use the DateTimePicker (DTP), the date box shows in the middle of the screen. Then if the user wants to select a date he cant, instead the date box goes away and the DTP value remains unchanged. This is not always happening, sometimes it works fine and sometimes this happens.Please go to the link below for an image (you can see that the DTP control is on the left while the date box is to the right):[URL].. application is being run from a server to a local client on the user machine, I dont know if this has anything to do with it.
I know that you can create custom formats for the DateTimePicker control, and I've googled this but is there any way that you can allow a user to only select Sunday dates in a Month with this control?
I am developing with VS2010 VB.Net and a SQL '08 dbase. I have a DateTimePicker control that by default displays the current date. If you ignore the DTP control and accept what the default is and save the record, in the database table, the value for the date is 'NULL'. I delete the record out of the database and re-create the record in the UI, but this time, I click on the DTP control and actually click my mouse on the current date or any date and then save the entry and it saves to the database properly. I guess what I am after is if a user instantiates the UI form to perform data entry and accepts the current date in the DTP control without clicking on the control, the value is saved properly to the database.
I have a DateTimePicker control that returns the current date.My usage is like this: DateTimeInput.Value.ToString("MMMM dd, yyyy")Please note that I need to get the date in the specified format.I just don't know how to add 1~2 years to the date.I mean if user selected January 01, 2009, I want to get January 01, 2010.So how can I add just 1 year or 2 years to the year of returned value?
