VS 2008 : Changing "Input Mask" In Ms Access With Code?
Nov 4, 2009
How would I go about changing the input mask in MS Access with visual basic code...I am using CREATE TABLE Here is the code of the code...The below code creates a new table with in my main database(.mdb) and changes the text property and makes it required, but I also want to be able to change the Input Mask to be password
vb
Dim oConn As OleDbConnection
Dim oComm As OleDbCommand
[code]....
This code works perfectly so far...I just can't figure out how to change the input mask..
i wish to apply an input-mask or a format on an input box so it can check if the input data is an email or not.the inputmask/ format would be as folowing &&&&&&&&&&&& "@" &&&&&&&& ".com ".That is in Access but how to do it on VB.net and an input mask. Here is a part of the code which I use
Dim x As String = InputBox("please enter new E-mail" + vbNewLine + "eg.(username@domain.com)", "Change Email", My.Settings.Email) If x <> "" Then[code].....
I have a Masked Textbox whose mask is "00/00/00", on the click of a button i need to change the the mask of the MTB to "000 Years 00 Months 000 Days" and also calculate the appropriate values of years , months and days.
I have used the following code to calculate the years, months and date, I want to know how should i set these values in the Masked text box.
There are a number of textboxes I would like to validate. I first set up the key press events to only allow key entry's of characters which I feel are valid for this location (i.e. numbers and "." for dollar amounts). But in addition to this I would also like to ensure that the user entered something valid using an input mask. This may be a simple question but I couldn't seem to find the answer to it. If I have a input mask of ###.## and the user enters something like 4321.23, would this throw an error and if so, how should I set up my mask large enough so the user is able to enter large amounts.
how to create an 'Access-like' input mask for hastening date data entry.
Using C Pearson's much quoted code I've modified it as such: Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim DateStr As String[code]....
Note: I'm aware that most of the time I'm simply re-typing the original code - it was a learning experiencing and I also realised that the different American and Australian date formatting was less of a programming issue due to the systems being set up differently in the first place.My issue is having run tests using only 4 digit entry, all types of digit entry, with and without DateValue on the final DateStr, changing the cell format to text, to general, to date - always results in a code like "8811" (i.e. 08/08/2011) being changed into 01/01/1924 (approximately).
At first I assumed the use of "DateValue" in assigning the final .Formula value was forcing this conversion. However, with or without DateValue it still seems to read the figure as a DateValue and convert it as such.I'm sure it has to be something elemental that I'm missing given the scores of people I alone have seen on boards reading C Pearson's code and not coming up with another peep.
I am using VS2005 version of VB.Net programmer. I wanted to use the user input but most people tell me to use console...but I cannot use this function since my version is different, it will not show any results. I found that using mask textbox can use to read the user input but I don't know how the code can be written. I want user to input two number such as 1.345 and 2.355 and use this number for addition and give the answer. I not sure how I write the code for mask textbox to be read once user input the numbers.
I am making a program for a game to change the textures. But when you edit an image file(the texture) it will change CRC32 and the game will notice you changed it so if you start the game the texture will just become grey. So what I want is that you can change the CRC32 code back to the old one that the game wil recognize and the texture won't turn grey. Now I found the CRC32 calculation on the internet but I can't figure out how to change it to the code you want.The CRC32 calculation class:
Option Explicit On Option Strict On <System.Diagnostics.DebuggerStepThrough()> _
say i have a TextBox1.Text on form1 how would i have it where i input code through the textbox and then it replaces what they put with the actual source(Form1
I used to use ADODC with VB6. Once I've set up databindings I can set a text box or other controls to link with a database's specific field by changing the Text property under Data > DataBindings. I want to change the field the text box links to at different times using code. How can I do this?
How do I get numbers typed into a text box to be feed into my code and then the code to be ran?Below is the code that I want the information from a text box to be fed into. With the (0, 50) being the numbers.I will have a form set up like this, A button labeled Generate. 3 Text boxes total, 2 of them side by side with one being low and one high. For example The user will input 5 in the low box at 100 in the high box. Hitting generate the numbers will then be inserted into code and the result being shown in the 3rd text box.
Now what is the code that I'm looking for that will help me take information from TextBox1 and TextBox2 and insert into the (XXXX, XXXX) field in my buttons code?
[edit]oops - stupid typo - this is resolved and explained in the next post[/edit] I've got a BINDING SOURCE - that I bind to controls - textboxes mostly. I create a row in the datatable behind this BINDING SOURCE like this.
Dim mask As ULong = &HFFFFFFFFUL Dim result1 As ULong = 20L And mask '//disallows implicit conversions Dim result2 As ULong = 20L And &HFFFFFFFFUL
If you put that into the IDE with Option Strict On, it will not let you compile because of 'result1'. I'm not sure I understand why. In the 'result2' assignment, I am explicitly saying to use an unsigned long, however it's not giving me any grief.
How to generate code from user input. In Visual Studio 2008, Visual Basic. My script always begins with:
Code: function Init(Quest) Then from here a user would input a quest name, type and zone in a interface using windows forms. Ex: Code: RegisterQuest(Quest, "Kill Zombies", "Heritage", "Firestorm") end This part a user would enter in his interface what would an NPC say if accepted. [Code] .....
What I need is a few text boxs that a user can input "Kill Zombies" or whatever they like and when they push a generate button it will create a file with a .quest extension. All of the code remains the same except for the quotes that would be the user input from the interface. Basically everything in quotes can be changed by the user in an interface. I have created my own functions for when a user accepts, deny and complete a quest. The user just needs to input what should happen then click a generate button to throw it all together as a .quest file to be saved in his or her quest folder for the server to call on later.
I also have many other functions like: AddQuestRewardFaction --- (Quest, Faction ID, Amount) AddQuestRewardCoin --- (Quest, Copper, Silver, Gold, Plat) AddQuestStepObtainItem --- (Quest, Step ID, Description, Quantity, Percentage, TaskGroupText, Item ID(s)) Etc
I would also like to have these available on the UI but wont generate unless a user checks a box to add them or there is a box already for them but wont step into the code unless the user enters something into the box.
I'm making a project that judges contestants. I have 3 labels at the bottom of my form that will keep a running total of the top 3 contestants, and change as the contestants score higher or lower. I'm not sure if I should use a loop or if statement, or where to begin at all.[code]
I have lines in my text file like this: x y x Y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y x y
Lets say I have 20 lines like this. I want to change this lines according to user input. So user will input how many lines they want to change in terms of row and column. In my program Row=TextBox5.Text column=TextBox6.text User must enter initial value for x and y. Let say the initial value is x=1 y=1. Row=2 column=5..
Now my lines should look like this. 1 1 2 1 3 1 4 1 5 1 1 2 2 2 3 2 4 2 5 2 x y x y x y x y x y x y x y x y x y x y
Since I enter row=2 only two set of lines is change other lines remain unchange. But in my coding all the lines is changing like this: 1 1 2 1 3 1 4 1 5 1 1 2 2 2 3 2 4 2 5 2 1 3 2 3 3 3 4 3 5 3 1 4 2 4 3 4 4 4 5 5 which is wrong.
This is my code Dim lines() As String = IO.File.ReadAllLines("C:\wirematches.txt") Dim xValue As Decimal = Val(TextBox1.Text) Dim yValue As Decimal = Val(TextBox2.Text) Dim altValue As Decimal = 2.54 Dim lineTracker As Integer = 0 [Code] ..... This code working fine for changes the column. But i dont know where i should write the code for row.
just wondering if it is possible to add a method to all forms in my project without having to do it on one form and Inherit all my other forms from that one
I`m developing an application working on a SQL database.if I put in my code a login and a password to a database, if anybody could retrieve it from the compiled application?
Now I am trying to copy the MS access table(hoping to keep the input mask). I have the table copying and renaming, but it fails to keep the input mask... So far this copies and clears the table, is there anything I am missing to make it keep the input mask
vb Query = "SELECT * INTO [test] FROM [tblAccounts] WHERE 1=2" comm = New OleDbCommand(Query, conn)
I know there are the 'Wizards' to help me, but I need the code to access the Table Manager, the data set and so on, create them in my project and access the tables or stored procedures
I made a UserControl with a button on it. I then added that UC to a form by dragging from the toolbox. Now I want to be able to access the click event of the button on that UC control in the form code. How do I do that?
if its possible could i temporarily change the inner code of a program instead of using a timer or multiple buttons ex: i have a BUTTON1 set to open a webpage like [URL]how be able to do something like this
Private Sub BUTTON2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click if textbox1.text=1 then button1.code=me.close
iv been looking at this code and basically what the code does it runs a report every month, but I want to make some changed to it i.e. how its laid out within the PDF document for testing this I don�t want to run the hole report because it will take forever as you can see it starts lowerDate = "01/JAN/1900" And for testing ideally I just want to run last month so am I right in saying if I change the date from 1990 to 1/8/2010 and then change upperDate = Format(Date.Now, "dd/MMM/yyyy") TO upperDate = Format(Date.Now, "31/08/2010") would that work?
Anyway this is my code right now so I am not blank.Code removed.Not sure if it is very hard to understand but I am currently working on a project and what this code does is finds a blue ball on thewhole screen then moves the cursor position on the blue ball it just found.If it doesn't find it, will show a msgbox Quite simple.
I want to change the font of text in rtb using code, not thru font dialog. e-g if i want to write all lowercase letters in "Arial" and all uppercase letters in "Times New Roman" then how can i do that. i hav tried using Text1.Font = New Font("Arial", 36, FontStyle.Regular) but it changes the font of whole text.
i have been trying to figure out auth system and after tons of researching and asking questions, I found a tutorial that "almost" fits my needs. This is what the code does:Basically a new form is created with a textbox and a connect button on it. When the program is loaded, the textbox has your hardware ID on it (also known has HWID). Then it looks for that HWID on a text file of the link given [URL] in this case as an example. If that HWID is found on that text file, then it leads you to form2 which is an actual program and if not, form1 closes meaning you have no access to anything at all. A basic authentication system and here is the code for it:
Imports System.IO Imports System.Management Public Class Form1