How do I overlay a control that is transparent over another one without showing the picture behind it? I want to put an image in a picturebox and the draw several controls over it that are invisible. To make a interactive adventure game
View 11 RepliesI am rather irritated at this. I have no clue why looping through controls on a form and in groupboxes leaves out 75% of the controls.
Here's the code I have:
Dim settings As String = ""
Dim gbControl As Control
Dim gbbox As Control
[Code]....
I want to have setting save all settings to an ini file, and not have to reprogram the saving routine when I add a group box or control. At random times, any number of controls can be disabled, checkboxes can be checked and unchecked, radiobuttons can be checked and unchecked. Regardless of the state of the control, I want the control to show up in the loop. But they don't. Only controls that are enabled and only checkboxes that are checked, every other control state is ignored. That's crap, and is definitely not what is needed by any programmer of any type. We're capable of determining if a control is enabled, hidden, checked, visible, and otherwise.
How do I get the controls to be included in the loop regardless of their state?
How many controls can I have before I should start looking at user defind controls because of too many controls making my program go slow?
View 4 RepliesI am trying to cycle throught the lables on my form but it would appear that I am missing quite a few labels... I have a total of 69 lables on my form and I only get 5 hits on the msgbox.
Dim ctl As Control
For Each ctl In Me.Controls
If TypeOf ctl Is Label Then
[Code].....
I wanted to know if anyone could tell me how to access the Click_event.I have a boarderles form with a panel control which has the Dock property set to fill and on the panel I have placed a Label also with the Dock property set to fill. I also have a timer running.How can I get code to execute in the Label1 click event.I've tried doing it by using the generic Click_event and also with two variations of the Click_event Handles parameters
'Alternativ 1:
Private Sub Form1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Label1.Click
[code].....
There is newer code in a follow up post. I suggest using the code in the later post rather than the code in this one. You can still read this post though. When designing a user interface, one should be conscious of how many individual controls are required to implement the functionality. In some cases an initial design may begin with many buttons or textboxes (for example) but then further review of
the actual required functionality allows for a reduction in the number of unique controls.
But other times, there isn't a better way (which will still make sense to the user of the application) then to have a series of many repeated controls. So in the cases where one can be certain that the best UI implementation for an application will require the use of multiple copies of a given control, then it often becomes necessary to maintain some method of managing all of those controls at various points
throughout the application. Doing so typically requires that one build up some collection of controls which can then be accessed by index in order to work with any given control; but this can lead to a lot of clutter in the code file which handles these control's events. For instance there will be some kind of collection declaration, some recursive routine to find all of the controls of interest, and then any number of event handler methods with long lists of Handles clauses, or additional code loops to wire up the event handling for each control.
Purpose Since most of this functionality could be considered a requirement regardless of the type of control being managed, or its required functionality, it may make sense to wrap all of the control management functionality into a single class. And since our first requirement is a collection of controls, then a base collection class could be the perfect starting point for our control manager. There are a number of existing thread around this topic, with some recent (at the time of this writing) ones being:[URL]..In this, and related, threads I have posted examples of a simple TextBoxManager and ButtonManager control. But again, with so much similar functionality required regardless of the control being managed, it would be technically possible to create a generic ControlManager(Of T As Control) class which can manage any type of control.
[Code]...
So in summary, one can facilitate managing a large number of user interface controls by building a "control manager" class which both encapsulates the list of control instances, and deals with adding and removing defined event handlers for every control it manages. The generic control manager class itself can be inherited and extended into a more specific class on a per-application basis in order to provide more application-specific functionality. Reed Kimble - "When you do things right, people won't be sure you've done anything at all"
If I have the following ListView, how can I attach a SelectedIndexChanged event listener to the DropDownList so I can perform a command on the respective object? Imagine I have a list of new users and I want to add them to a usergroup by selecting the group from the DropDownList.
<asp:ListView ID="NewUsers" runat="server" DataSourceID="NewUsersSDS" DataKeyNames="ID">
<LayoutTemplate>
[Code].....
I have a maximized form that has controls at the top of it and a large DataGridView that is docked below all the controls. Its kind of like the Ribbon in MS Office. The controls cover about 1/4 of the screen at the top. I would like a way for the user to click a button to hide all the controls then automatically expand into the place the controls were so the user can view more data in the DataGridView and visa versa. For example, in MS Office Excel you can hide the ribbon by clicking a tiny button that has "^" on it.
I'm not very familiar with all the controls in Visual Studio so I would like to hear some recommendations. Is this situation ideal for a SplitContainer or ToolStripContainer or am I way off base here?
I've got a couple of these NumericUpDown controls I put on a form. Without describing too much about the form I basically want to update some variables each time one of these NumUD controls changes value. So for each NumUD I have a call to a Recalculate subroutine within their "changedValue" event.
There are actually two problems. First, if I initialize the "Value" property to something other than zero in VB2010 at DESIGN TIME it won't even open the form when I hit RUN. It gives me a "No Source Available. No symbols loaded for any call stack frame" error. The error box says "InvalidOperationException" was not handled. So if I try to set the initial value of the Value property to anything but zero of either I get this error.
[Code]...
I've been building controls for many years professionally and personally, but even back in VB6 days I just could not work this out. After all this time I remembered about it again.If I create a usercontrol/containercontrol and add one or more controls to the controls surface, I just cannot figure out how to access the controls at design time.
View 4 RepliesI want to draw a rectangle over some controls so that the controls are partly obscured.
View 2 RepliesI have a query about dynamically added controls to a form. I have a series of buttons which are created and added at run time. I have a two drop down lists and two buttons which are created at design time. Button 1 creates a series of buttons called "Test 1.x" based upon the selection of the two drop down lists. This works fine and am happy with the logic.However.... Button two should remove all the dynamically created buttons from the form.This does not happen. What does happen is that 50% of the buttons are removed starting with the first one. WHen checking the loop it only enters the loop half the amount of times that there are buttons. Very strange. When the loop is run repeatability it will remove all controls. Why will my logic not remove all the dynamically created controls at once? What is wrong with my logic?
I attach two code snippets and the .net file for your consideration.Button method which creates the dynamically created buttons from the two drop down lists and adds to form
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Count As Integer
Dim MaxHours As Integer
[code]....
i have created control array , now i wann to loop around as well wann to find which control has triggered the respective event my code :
[Code]...
The object browser in visual studio contains many controls and properties ....so is it possible to remember in mind all these controls. Whenever i am programming in vb 2008 and for reference i look at the examples on internet i always find some new controls,properties etc which makes me confuse.So i was wondering If by any means there is a way to remember all these controls
View 4 RepliesI have aspx form with several textboxes.They are populated with values from a table via retrieval of a dataview.If the row count for the dataview is 0, then I'd like to reset the values in all textboxes. How can I loop through all the textboxes and set a default value?I've tried the following, but no sucess.
For Each ctrl As Control In Page.Form.Controls
If TypeOf ctrl Is WebControls.TextBox Then
CType(ctrl, WebControls.TextBox).Text = ""
End If
Next
My first For Loop was using Page.Controls but it returned only 1 count.The textboxes are inside a tabpanel (ajax), so do I have to locate the tabpage and then find all it's controls (for each tabpage)?
How can I add controls to a form in code and set the properties of the controls using the With statement?Also I would like to know how to add a container control and then add a control to that container.
View 2 RepliesI have a slight problem With an enumaration of child controls on a form. The following code will not get but about have the controls that are on the form. The controls show that the count is correct but when it goes through the loop it skips over some of the controls. If you run it through the enumeration two or three times it will get all the controls a few at a time. The solution uses two forms, one that has the controls and the other that labels are made and displayed on. The Tx is just a index to add a number to the label.name and rename the label. So each label is identified seperately. This works for all the the controls that are seen in the for each loop.
View 11 RepliesI created a class that can take either usercontrol.controls or form.controls as a parameter,how can i pass either to that class? as a property or how?
View 4 RepliesWe are binding most of our text boxes and dropdown boxes to a BINDING NAVIGATOR (with a DATA SOURCE of a DATA TABLE).When the BN is clicked through the text boxes all change immediately.We need to use some non-bound controls as well.First one is 4 radio buttons that when clicked will change a single value in a DATA TABLE.What would be the best method to do this? Should I track when the CURRENTCHANGED event occurs on the BINDING NAVIGATOR.I'm thinking that I could trick this by BINDING the SINGLE FIELD to a HIDDEN TEXTBOX and when that textbox CHANGED event occurs mess with the radio buttons and visa-versa.
View 5 RepliesI cannot work out the correct formatting of the above type addressing for a textbox in a (sort of) array of textboxes such as
textbox_1
textbox_2
textbox_3
etc.
The controls are on Tabs but I don't think I need to include the Tab as a container control, just refer directly to the textbox on the form, but I cannot work out how this is done in VB .NET format. In VB6 it was relatively straightforward but VB .NEt seems it is different. Can anyone help me with the correct way to formulate
[Code]...
I have a module level sub that I use to clear text fields etc on my forms:
CODE:
The problem I have is in the last few lines of code as I'm not really sure how to access the text boxes contained within the tab controls (of which there are many tabs and many text boxes).
This is the closest I've got but I am getting an "option strict on disallows late binding" error on the tabCtl in the following line.
I wanted to delete all of the TextBoxes that I put on a form that start with "tbx". The below code only deleted some of them.
For Each ctl As Control In Panel1.Controls
If ctl.Name.StartsWith("tbx") Then
ctl.Dispose()
End If
Next
So, I took it a step further in testing...Now I'm really confused about the .controls collection. When I try to delete controls from Panel1 with the below code, it only deletes every other control instead of all controls.
For Each ctl As Control In Panel1.Controls
ctl.Dispose()
Next
It looks like it deletes item(0) which moves everything back one step but then advances the pointer to the next step. For example, if the following controls exist on the form...
tbx1
tbx2
tbx3
tbx4
I would like to know how do .net developers manage a large window application with a large number of controls, such as textbox , button, groupbox? I have seen a number of people do it this way : declare the controls as an array and initialize them one by one at run time . In this way it is easy to manage those controls because they can be accessed by array index; but this solution seems to require very good understanding of control's attribute such as its location, font etc. This could be a difficult task if the project is passed on to a less experienced developer and add changes to it.How do you deal with it?
I'm in the middle of using Visual Basic (Visual Studio 2010) to create dynamically created controls. Essentially what I'm doing is creating a label, a textbox, a label (which will act as a stopwatch), and a button (to control said stopwatch). Each set of controls will be arranged (and named) like this in a row: [Code] I've gotten the bit about creating the elements dynamically as well as creating them within in a panel with a particular number attached to the end of its name on the form that I've created. What I would like to do is wire an event for the button that was dynamically created to control the stopwatch timer that was created through the same event. So in short, I'm asking how do you wire an event to control a particularly dynamic button?
View 1 RepliesI have a form. And some controls(such as TextBox,ComboBox,etc.) on the form.Now,I want to store the controls' Text into a .txt file(or any other formarts).Then I want to read the text in the .txt file to my controls.
View 10 RepliesAs i'm learning more and more about developing ive just got my head around creating classes and modules, i started wondering about something to do with configuration of applications where deployment is in a more diverse environment say in a company where different branches dont need access to all parts of a program, so i thought id throw the question out there in a basic sense and get some feedback. so i can go off and do some more reading and learning.
So the scenario in my head is like this.
So we have for arguments sake FrmConfig which is the master configuration form, then we have FrmMain which is the root menu our application general user interfaces with. So here based on what options are checked as enabled in FrmConfig effects what controls (like buttons/menu options) are enabled in FrmMain.
I use panel.controls.add to add controls to the panel. But... they insert at the very top of it.
I tried the BringToFront and SendToBack methods, but does'nt seem to be working.
what i want, is that they dock at the top of the container, but if there is another docked control there, the new one is displayed below that one...
I am trying to cycle throught the lables on my form but it would appear that I am missing quite a few labels... I have a total of 69 lables on my form and I only get 5 hits on the msgbox. All controls were placed on design time on the form and not on panels or tabs. Also upon inspecting the me.controls. the count is incorrect as it is missing exactly 64 controls. (The missing lables).
Dim ctl As Control
For Each ctl In Me.Controls
If TypeOf ctl Is Label Then[code]......
I have a form with MenuStrip, ToolStrip & StatusStrip. Placed a panel with a 5000 x 7000px image and scroll bars are on form and scroll the image fine. Problem is that all controls appear to have changed size to size of image and also scroll with it horizontally. When scrolling vertically, the image covers up the menu and tool strips. How I can keep the controls on top so they don't attach to the image in the panel?
View 2 RepliesWhen I copy controls to a different form and run the program, they do not show up on the form, how do I fix this? They also do not run with the form.
View 1 Replies