When I double-click on a row in a DGV I first have to single-click the row to select it before the CellDoubleClick event will fire. Is this the normal behavior? Is there any way to just double-click any row & have the event fire everytime
Within my program, I'd like to allow the user to hold the CTRL key down while double-clicking with the mouse. Specifically, within the treeview control, I'd like to allow the user to be able to CTRL-DoubleClick but the DoubleClick event has the EventArgs parameter that doesn't provide any keyboard data.I'm guessing that this is possible, but I'm just drawing a blank on how to implement it.
How do I set the all data in the datagridview goes into the textbox?For Example Fields name.LastName the data will be shown into lastname.text , FirstName will be shown into the firstname.text and also the other fields into the sql database.And how also to can not type into the datagridview or will be disable to type in every cells.
I'm writing a Windows Forms app that uses a DataGridView control. I have row select enabled on the control. I would like to trap the DoubleClick event, but it doesn't seem to fire reliably - I often have to double-click on a row 2 or 3 times before the event is triggered. Could anyone point me to a way to capture this more reliably?
I am very new to programming so let me apologize for that upfront.I am using Visual Studio 2008 and have created a windows application form. I have the form connected to an MS Access database named vendors.accdb. I have added a DataGridView to my form named VendorsDataGridView. I have also added a RichTextBox to my form named RichTextBox1.[code]I have my form setup to run queries that compare like items from different vendors and display them in the VendorsDataGridView.what I need the form to do is when I doubleclick on a particular row (in the VendorsDataGridView) I need it to copy to the RichTextBox1 and go down to the next line so I can add more rows from different queries.I need to understand what goes between the Private Sub and End Sub of this:[code]I could use a textbox instead of a richtextbox if need be.I have searched high and low for the answer to this. I have tried a variety of things but none have worked. I have been reading different books to try and understand Visual Basic code better but I am too new to programming to get the doubleclick event to work.
I have a form with 1 DataGridView and 3 TextBox control which is txtName, txtAddress and txtDesignation. I have also MS Access Database Table with StaffName, Address and Designation. What I want is when I Double click firstrow DataGridView RowHeader.. the data from database will display in the txtName, txtAddress and txtDesignation respectively.. means StaffName for txtName, Address for txtAddress.
Using VB 2008:I am using 2 bound datagridviews.Each on it's own form, bound to the same table.DGV1 is for displayingDGV2 is for searchingI am wanting to double click a row on the DGV2 on search form2, closing it, and have the same row highlighted, selected or displayed first on the DGV1 on the display form1.
I'm using the following code to pull some of the installed applications from the registry and load them into a ListView:
vb.net Public Sub UninstallPrograms() HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionInstallerUserDataS-1-5-18Products
[Code].....
The problem is that I need to be able to access the the value of the uninstallString so that I can pass it to the appropriate process. Since that info is in a separate block, I can't directly access it.
i have a databound datagrid in vb.net 2008. This is a program where i use the double click event multipal times.. but for some reason on a new form it's not working anymore. In code behind i selected the datagrid and double click event. when i double click on teh grid in debug mode, it never fires off the event(i put a breakpoint in). I've tried several other events and none of them are firing.
I am having trouble with the DoubleClick event of a ListBox.What I need to have happen is when the user double clicks the package number in the ListBox, all the information will display to a MessageBox.This should include package number, arrival time, and so on.[code]
I have defined a class which inherits PictureBox-component.In this class I have a mouseClick and mouseDoubleClick events overridden.On mouseClick the image is selected. Now if user click it again, it is delesected.The mouseDoubleClick event starts the video which this picture is pointing to.Now the problem is that when user doubleclicks the pictureBox it actually calls the mouseClick-event twice (select-deselect) and does not call the mouseDoubleClick-event. How can I define it so that if mouseclicks are done as doubleclicks then doubleClick-event is called, not the click event twice?
I'm using the MouseDown to create objects, they are used within MouseMove and they are killed within MouseUp Event. Now I want to use the Doubleclick Event to build in some shortcuts. My problem is that the MouseUp routine is called sometimes before the DoubleClick routine. I do need the MouseDown Event before starting the DoubleClick code, however sometimes the MouseUp event is triggered which is killing the needed objects.
Is it possible to get the DoubleClick-event routine always without the MouseUp routine?
We're trying to design a toolbar to use as an addon in another program. we want to set one of the buttons so that when u single click it, the image on the screen is blanked out. And when you double click the same button, it blanks everything except the selected image. However the DoubleClick event doesnt seem to be working at all.
I am setting up a GUI and at one place I have a group box (say GroupBox1) containing several controls (say CheckBox1, Button1 and ComboBox1). Now for some specific reasons, I want to be able to disable the controls within the GroupBox1 by double clicking in the group box, and then to re-enable them again by double clicking the disabled GroupBox1. I do not want to enable/disable the controls separately, because I need to duplicate this operation for GroupBox2 to GroupBox10...I've sort of gotten the disable part right with the following
Private Sub GroupBox1_DblClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles GroupBox1.Enter GroupBox1.Enabled = Not GroupBox1.Enabled End Sub
But it does not work very smoothly and I am also not able to re-enable it. I suspect that an disabled object (such as the GroupBox) does not register clicks.
I've working with this control some days ago, and I need help about this.. I need get the X/Y values when do a doubleclick over the zedcontrol.. how I do this??
I have a simple form that has some buttons on it that work fine when the code is for single click. I want to make it so you have to double click to fire the sub. I tried just adding Double to the code but the sub wont fire then.
This works:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
But this doesnt??
Private Sub Button1_DoubleClick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.DoubleClick
Why? do I need to add something else?
I looked in the properties of the button but didnt see anything.
The problem is that if you click on the button the sub fires, but then if you hit return it fires again. If I could take the focus off the button that would be fine to.
I am using Visual Basic 2005 Express and have 8 PictureBoxes on the Form.. When the user Double-clicks any of the Picture Boxes, the path of the image needs to be passed to a Subroutine..As of now, I have a different event for each of the PictureBoxes.. I was wondering if there is a way such that I can use a common event. i.e. if a user double-clicks on any of the picture boxes, the same event is raised ?
I have a form with formborderstyle = none. I already know how to move this form and resize it. But I want to maximize the form when you double click it.
I already know:
Private Sub Form1_MouseDoubleClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles Me.MouseDoubleClick WindowState = FormWindowState.Maximized End Sub
Now its maximized, but now I want it to go to the previous size, so when you double click again when maximized, the form goes back the the previous state.
I am using 2 bound datagridviews.Each on it's own form, bound to the same table.
DGV1 is for displaying
DGV2 is for searching
I am wanting to double click a row on the DGV2 on search form2, closing it, and have the same row highlighted, selected or displayed first on the DGV1 on the display form1.
I have a ListBox containing a list of PDF files. The ListBox Click event displays the selected PDF file in a PDF control that serves as a type of preview for the user.
Private Sub lstPDFDocuments_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles lstPDFDocuments.Click
If IO.File.Exists(TempCurrentDocumentsBasePath & "" & lstPDFDocuments.Text) Then Me.pdfDocuments.LoadFile(TempCurrentDocumentsBasePath & "" & lstPDFDocuments.Text) Me.pdfDocuments.setShowToolbar(False)
[CODE]...
I want the user to select a PDF file with a click and be able to preview the document and when the user needs a larger view of a PDF file the user simply double click on the list box. When clicking on any of the ListBox items the selected PDF file is displayed in the "preview" pane. When selecting the mnuDocumentsView option from the context menu strip the new, larger, form reflecting the selected PDF file is displayed perfectly. But, when double clicking on an item in the ListBox the Click event is executed instead of the DoubleClick event. For some or another reason I cannot use both the Click and DoubleClick events on a ListBox. I've tried seperating the DoubleClick event from the mnuDocumentsView click event, MouseClick, MouseDoubleClick, but no luck.
what should i do to play .swf file on visual studio shockwaveFlash; This codes is working when in formLoad (the problem here is the filename)The listbox is composed of .swf files
When i double click the listbox1 which is composed of fullpath .swf it will not play on shockwave or even microsoft web browser This codes is not working
AxShockwaveFlash1.Movie = Application.StartupPath & listbox1.selecteditem (it needs a full path to run like the above codes)
As the subject describes, once I implemented support for DragDrop - The DoubleClick event of the ListView control no longer fires.An overview of the code is as follows:
Private Sub ListView_MouseMove(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles ListView.MouseMove
I have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
My name is Stefan and i would like to know how can my app see that it was started up on a file-associated DoubleClick?I know how to associate the files using the "Registry" method and the "Publish" method.
I am making a simple program.. i have a Form named frmmain that contained datagridview control named DataGridView1.. and another form named frminsert that contains two textbox controls named txtFname and txtLname and Button control named btinsert.. I want to pass the value from txtFname to the Datagridview column1 and the value of txtLname to the Datagridview column2 when I click the btinsert.