I want to make a program that compiles dll files to a prebuilt exe in the same directory of the file exe file:iPhodroid.exe.I wan to compile about 15 dll files to it here is the link for the source code and dll files.I want to compile the files when the users press FIX IPHODROID button.
View 5 RepliesI have a program where a lot of the required information for it is stored in text files. I simply read this information into large arrays. However, I don't think it's necessary to load all the information each time. Rather, it would be more efficient if I could simply search through a list of items to find the one I need and then use the data from it, or to find a similar name and use it elsewhere.
Would I be right in using a database? And is database programming done in SQL? I have a book on it telling me to use the SQL Server (IIRC), so I shouldn't be doing it in the VB.NET Express GUI?
Here's an example of what I would do:
Hex = 03 00 => dex number 003
Search in file Pokemon Dex Numbers
003 returns Bulbasaur
Check Bulbasaur base stats in the base stats file
etc
So basically I'm reusing a lot of information. I think a database would be best and it would all be internal right? I'm getting complaints about access denied to a text file (since it's stored in the program directory in the program files).
So to cap up the few questions I have:
-Databases are done in SQL and not inside the GUI?
-Databases would load internally?
-I could search a database without having to load it into like an array or something?
how can i either copy/move/rename & delete a file in program files directory? [c ode]i already have the form which grabs the updated file and it save it to temp directory ready for copying, just stuck here as of the access denied.
View 4 RepliesIs there any software where i can buy that compiles exe files to .net or c# /?
View 6 RepliesMy application creates a file by writing to System.AppDomain.CurrentDomain.BaseDirectory() & "data/" & filename...Now this works fine usually, but I just added a setup utility to the app, so now it installs to the program files directory. It installs correctly and creates the data folder, however when it tries to write the file it gets an exception "unauthorized access".
View 3 RepliesSo I've just created a small program that reads from a file and has a few nested loops. I have a label that updates in the form every time the loop is run. When I compile this program in vb (2010), the program works properly, and the label updates as expected every time the loop is run. When I run the built .exe version, the program's backend works, but the label doesn't update, and the loading cursor appears over the form.(So the loop continues to run properly, but the label doesn't update on the form).
View 5 RepliesI am using a webbrowser control, which is used for both internet and folder exploring. How can I determine when viewing files on the local directory, which file is selected?
I ran across something in my searches saying there was a property under the webbrowser.document called SelectedItem. But this must not be in 2008.
I have compiled a project with no errors and published the release version through ClickOnce to my website, almost 5 users are working ok with the application but on 2 computers the appliication fails when a button is pressed the exception is "Index was out of range.Must be non-negative and less than the size of the collection. Parameter name : index" Note that no parameter is named index in my code and that the program runs fine on 2/3 of the computer's I there is an error why does the application compiles?Also i have send my project file to a friend to use on his own visual studio to check if it compiles and the errors appeared in the debuger despite that i havent managed to find a solution, i beleive that my code is probably ok. I'm using visual studio 2008 with Option Explisit and Option Strict On and all the deployment pc's have .net 3.5
View 1 RepliesI'm trying to make a file.copy to the program files folder but can't get access to it.This is on windows vista and 7.
View 6 RepliesAll I am trying to do is write a simple program that will let me choose a directory and get a listing of all files in that directory and its sub-directories and show it in a RichTextBox. I got as far as being able to select the directory but when I click "OK" I get "access to c:documents and settingsstevedesktopmp3 is denied".The code I am using is listed below.
Imports
System
Imports[code].....
I'm using a dialog box to select multiple files and move them to the directory "C:/Playlist". I guess you can say I'm having trouble with 2 things.
1. The Loop
2. Use of the dialogs FileNames function
[Code]...
I have audio files in the directory of my program.. Can I somehow code the audio files within my program? Like they compile within my program and are called from within the program..Is this what my.resources is for? (I don't know anything about my.resources..
View 4 Replieshow to copy, delete, show files, show current directory, change directory, make folder, rename folder. My problem is i have a method on deleting a file and copying a file, but i don't know how to pass the method so that when i click the delete button it would let me choose what file to delete. By the way im using buttons on each function.[code...]
View 2 RepliesI am trying to create a program which will read the files that exist in a directory, and then write in a text file the specific information (full file name, date created)i have found several code in the site but i cant make it work, the machine i am running the code is XP and i am using VB2008.The code i have found is the following:
Imports System.IO
Imports System.String
[code].....
I'm making a map creator that chooses images randomly from various sets. What I'm trying to do is set up subfolders in Resources and put the different images in each folder - e.g., a folder for streets, a folder for monuments, etc. Then I just make an array of images out of the files in the folder, and pick one.
For some reason, I can't find a simple way of getting at the subfolders. I've tried using IO.Path.GetFullPath(My.Resources.ResourceManager.BaseName) and appending the folder name to the end of it, but no luck.
Is there some other way of getting the path? Is it even possible to use subfolders of Resources? Is there a better way of doing what I'm trying to accomplish? I'd really like to avoid creating the image arrays by hand.
Im making a "offline viewer" which uses saved webpages. What do i put to make the program look in the root directory, and so make the program more portable. E.G. if the program is stored in C:Viewer it will look for the webpage under C:ViewerWebpagesI know that in some location formats you can have ...Webpages however i cant seem to find anything like this that works in vb
View 7 RepliesI have a problem with my application. The following method lists all files with the extention "*.wgmp" in a specific directory.[code]....
View 2 RepliesI normally install my application in a directory in the c: drive as the software is only used within the company.There is some simple security; the program writes a 'bat' file that gets the volume serial number this then this is used to generate a licence file. Both of these files are written in the application directory.I'm giving the program to an external client and am going to install the program in the program files directory - but I find I cannot write a file to the Windows 7 program files directory.
View 2 Replieshow i need to store data to the program files directory, but i couldnt becuase it required adminstrator privileges. After searching around i found an appdata folder with the path "C:UsersCristian RiveraAppDataLocalVirtualStoreProgram
[Code]....
how to download folders and i know how to search for folders but how can i download a folder into the above directories without knowing the name of the user account.
Just got a little quirk with VS2008 on 1 solution.When i press F5 to debug my solution builds the current project but then insists on building all my setup projects...
This only occurs on 1 of my solutions and it has 20 projects within it.
I've checked startup projects and it has no dependancies and is set to selected project.
EDIT: Right click and debug in new instance works fine
I am trying to make a program that is able to find out where it has been saved on the computer, and take that directory and save the output of the program, which is a text file, to the same folder that it is in.
I have already made it so that I can type in the directory in my code, but i want it to be more adaptable.
I am tryin to make a program that will create directory and also will create sub directory in that folder. The folder name has to be only numbers. this is what I have:
HTML
Public Class frmFolder
Inherits System.Windows.Forms.Form
'Windows Form Designer Generated Code
[Code]....
I will also need to create security permissions for specific users so they are the only ones who can create folders on specific network drive and have a full control over that folder.
I want to create a file removal which revieve directory files to delete from a text file..[code]
View 2 RepliesHow can i extract all the files from a .zip file into a directory? I have to do this because no free file hosting allows .exe files so im going to have my program download the .zip file containing the .exe then extract that file when its downloaded.
View 23 RepliesI am deploying my application on a 64 bit windows 7 system (setting the platform property to x86) , after the installation process the app needs to set its connection string in the config file; and this is where I am having issues, the app is not able to write to the config file if/when its located under the program files directory (no admin privileges??), the app works fine when installed on a public folder.Please let me know how to give admin or write access to my app when its installed to the default program files directory
View 2 RepliesIve been trying to make a program that scans a website for the Forum directory mainly to learn about HttpWebRequest.I know that i need the url, and the request, so i set that up like this:
Dim Message As String = String.Empty
Dim request As HttpWebRequest = DirectCast(HttpWebRequest.Create(Url), HttpWebRequest)
and i set the Credentials to DefaultCredentials Now, How would i scan the directories?
i've tried
for response as HttpWebResponse = DirectCast(request.GetResponse(), HttpWebResponse)
logBox.Text = logBox.Text & vbNewLine & response.ToString()
next
but this has errors...Just trying to scan a site for multiple directories using HttpWebRequest.
I just need to get VB08 to look for the file which start with an integer and then the username in the application startup path.[code]...
View 2 Repliesi have to get the files in all the directories with date formats in file name and also in extension. Some thing like new_mmddyyyy.txt / new_yyyymmdd.* like this....
View 14 Replies1)How can I make my program get the contents of a .txt file on my website to tell the program to run or not?Here is and example of what I want:Say the file says "Running", the program would run without problems.If the file was to say "Unavailable", a pop up would appear saying "The program is currently unavailable, try again later." Then once the person clicked OK, the program would close.
2)How can I make the program get contents from a .txt file to get the latest version of the program, then if there is a newer version, there would be a pop up saying there is a newer version and they need to update. Then when they clicked OK, the program would close and it would open their default web browser or Internet Explorer to the update page.
I have to make a program that reads a txt file after reading it, show it in a richtext box and in another tab make the average of the grades the input received sort it by the student id and then in the same rtb sort it by the average of their grades, and finally save it on a new text file.
The text file input is something like this
12 3 10.0 6.9 7.3
19 2 6.7 9.3
10 3 4.5 9.3 4.5
[Code]...
As you noticed in the input the first number is the student ID, the second number is the number of tests made by the student, and the other 3 numbers are grades, in the output the first number is the student ID, the second number is the average of the tests, and the other 3 numbers are grades, I don't have a problem opening and saving a text file and neither creating a tab with 2 RTB , my problem is how do I tokenize or read the input line by line, i guess that i need to use the split function but I don't know how to implement it into the program.