I found a function that validates the numberic and decimal input for a textbox and works exactly like I want. But it does not let me limit how many numbers after the decimal. how to do this in the same function?
[Code]...
it should take either decimal values or integers and max length is 16if it takes decimal value as input then it should contain only 14 digits in decimal place and 2 digits in fraction part eg(1234567.12-valid) but (12345678.123 - invalid) and also(123456.12345- invalid)
View 2 RepliesHow do I suppress all data except numeric?
This is not working on KeyDown():
If e.KeyData < Keys.D0 Or e.KeyData > Keys.D9 Then
e.Handled = True
End If
I have a function in my textbox1 with the got focus event. I have a 40 textbox in my goupbox1.[code]I want that when the textbox1 gotFocus, all my textbox in groupbox1 under the for loop event will declare that only numbers are allowed to be entered in all the textbox. I manage to work with it but only in a single textbox. Here is my code for it.[code]Is there a way or would it be posibble to put this code # 2 into the code # 1? So that I don't have to declare 40 TEXTBOX which is not good.
View 5 RepliesHow can I make a textbox in which can be only typed a number like 12.00 or 1231231.00 or 123123
I've done this in a very long way and I'm looking for the best and fastest way.
Also the decimal separator must be culture specific.:
Application.CurrentCulture.NumberFormat.NumberDecimalSeparator
how do I limit a numeric value (Integer type Array) to only show 2 places after the decimal ? ie: 25.00 and not 25.00175?
View 7 RepliesHow do I allow only a decimal point after an input of three digits in a textbox in VB.NET?
Let's say I inputed "123" after that I can only put a decimal else it wont allow any other input. So the result would be "123."
Dim KeyAscii As Integer
KeyAscii = Asc(myE.KeyChar)
Select Case KeyAscii
[Code]....
Is it possible that a user input to a textbox like '12500', but vb shows it
'12,500' at the time of input.
But at the saving time vb should to read the '12,500' as '12500'.
Maybe this is just a really basic question that everyone knows the answer to, and is why I couldn't find the answer. What I want to do is pretty simple. I want to declare a custom type that's just like a Single, except when you access the value, you get the value rounded to the second or third decimal place. Something like this:
Dim MyNumer as TwoDecimalNumber
MyNumer = 1.124
Msgbox(MyNumber) 'This would pop up a box showing "1.12"
[Code]....
I am writing a calculator app in VB Express 2008. I'm trying to get the app to accept numeric and operator input while ignoring all the alpha input. In other words taking input from the numeric keypad and the top of the keyboard and ignoring all the letters.
Here's the block of code I have so far:
Private Sub TextBox1_KeyDown(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles TextBox1.KeyDown
If (e.KeyCode >= Keys.D0 OrElse e.KeyCode >= Keys.NumPad0) And (e.KeyCode <= Keys.D9 OrElse e.KeyCode <= Keys.NumPad9) Then
Select Case e.KeyCode
[code]....
I can't get vb to recognize the above code it seems to skip right over it. BTW, is 'Keys.Crsel' the same as the caret '^' symbol?
I have a form with a textbox on it. Validation occurs on the leave event. If validation fails, the focus is set into the textbox, making it impossible to click outside it unless there is a valid value entered. A valid value is anything from 15.00 to 99.99 inclusive, always with two decimal places.What code will return a boolean answer that checks if the input is valid?
View 3 RepliesI have a bound Datagridview with a column Quantity in which I want to enter numbers but dont want the user to type a decimal. E.g. 100 should be allowed, however 100.23 should not be allowed.Have set the DefaultCellStyle property of this column to
DataGridViewCellStyle { Format=N0 }
AND
Also in my Form Load event i have entered below code:
Me.DataGridViewTblInvoiceDetailsAndTblTempInvoiceDetails.Columns(2).DefaultCellStyle.Format
= "N0"[code].....
However this is not working.When I run the program it is allowing me to enter decimal values.
best way to check if a textbox has only 4 numbers and isNumeric, for example i need to enter postcodes.I currently have:
If CDbl(txtPostcode.Text) <> 4 Or Not IsNumeric(txtPostcode) Then
MessageBox.Show("Postcode must be 4 Digits", "Error")
But the message box comes up regardless of whether there is 4 numbers, letters, or anything in the textbox. Its also used in the leave function of the textbox.
I validate TextBox for numeric and length no more then 7 characters. I'm checking for Not IsNumber and Len. But I want to give a user to save record when TextBox is blank.
View 12 RepliesHow would you verify a textbox if contains at least one numeric digit and one alpha character using loop?
View 3 Repliescan anyone look at this and see why it doesn't work? When I test and enter a numeric value in the text box it still gives the error I have placed in the code, same if I put in a letter etc.
Private Sub valueDouble(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtTestscore1.TextChanged, txtTestscore2.TextChanged, txtTestscore3.TextChanged
[code].....
i use visual basic 6 i already try making a button to play sounds. by clicking the button and the sound will out. so that i want to know were could i start, when you input words in textbox the program will speak what you have type in the textbox.
_
In a textbox on my form, I have a value that loads in it that is something like "10.38 - 12.33"
I want it to where the textbox will display whole numbers only. So it will show "10 - 12"
I am writing a small program here and this i=code is straight out a book and it doesn't seem to work. Its supposed to ensure that the users input is numeric and not contain letters.
Module Module1
Sub Main()
Dim user_Input As Single
Dim H As Single
Do
Console.Write("Enter you'r Height in Meters: ")
user_Input = Console.ReadLine
Loop Until IsNumeric(user_Input)
H = CSng(user_Input)
Console.WriteLine("You are {0} meters tall", H)
End Sub
End Module
i have finished my code and the program works but i need setup a few error messages incase a user inputs invalid data (non numeric, and negative numbers)i keep getting both errors at the same time when i input a negative or non numeric data. My program allows a user to calculate cell phone bill
[Code]...
I'm working on a program that requires the user to input an integer. How do I prevent the user from entering a non-numeric value? I tried using the IsNumeric() function but I get an error before I can use it. I get the error at the console.read, before I can call the IsNumeric() function. [code]...
View 5 Replies1) One Decimal Varibale stores a decimal value
2) The value must be converted in string ( some time the comma is used as decimalplaceholder some time the dot)
3) the user modifies the value
4) i need to riconvert the string back in decimal
how can i do this
so:
Variable 123.34D ----> textBox 123,34 or 123.34 -----> variable 123.34D
I have a field in an access database with decimals in it. I am using ADO to read in the data and are trying to assign it to a textbox in a form. This works fine when its a whole number. But it doesnt seem to work when its a decimal for some reason.
I have declared the variable i have assigned the access field to as a double, but when i set up a test textbox which i point the variable at and times it by 1000, it doesnt work. Works perfectly when i change the access field entry to a whole number though.
This sounds like im not using the right syntax or something.
How can i check whether the text box is numeric or not? Because i want to do validation. but i tried many style still cannot work.
View 6 RepliesI currently have a subroutine that generates a file with specific parameters, and it relies on user input in 2 fields. Now I also have a numericupdown control. What I'm looking for is a way that if Numericupdown.Value = 3 then it will generate 6 textboxes and once the parameters are filled out completely it will generate subroutine times(numericupdown.value) and output it to a single file.
View 3 RepliesI'm trying to validate input boxes for numeric value and range value. If I validate for either numeric value OR range value there is no error (for example, comment out one of the validation statements), but if both statements are present and I enter "a" I get an error "Conversion from string "a" to type 'Double' is not valid." Can anyone tell me what I'm doing wrong?
[Code]...
i am use vb 2003 windows app with access 2003 database i want this code to check for numeric input only in the last text box CompanyProdPriceTxBx.Text
this is my
Private Sub SaveCompanyProdbtn_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveCompanyProdbtn.Click
Dim rep As Integer
If CompanyProdNameTxBx.Text = "" Then
rep = MsgBox("Please Input Product Name", MsgBoxStyle.Critical)
[code]....
Description of Program/Events. I would like to come up with a number generator that takes the Total number (for this example I'll say 20), divides it by 2, and does alternating additions so the end result will generate a list like this:
1, 11, 2, 12, 3, 13, 4, 14, 5, 15, 6, 16, 7, 17, 8, 18, 9, 19, 10, 20.
I can understand the arithmetic, just can't work out how to express this in code. The end result would be save in a .Txt file (I have added a SaveFileDialog1 control, but figure I need to get the result before I work on the export).
Dim StartValue As Integer
Dim EndValue As Integer
Dim TotalValue As Integer
' Convert input to numeric variables.
StartValue = Val(StartNumTextBox.Text)
[Code] .....
I am trying to mkae sure that there has been 16 numeric digits entered into the masked textbox. If not show errror message and if so to call the fucnction ValidateLuhn. When calling Validate Luhn i want the program to tell me if the number entered is valid or invalid using the code in the function:
Private Function ValidateLuhn(ByVal value As String) As Boolean
Dim CheckSum As Integer = 0
Dim DoubleFlag As Boolean = (value.Length Mod 2 = 0)
[CODE]...
im trying to create an instant messenger i have textbox where user can type anything like url etc..how do i get the url string that entered in textbox when i press button.i just want to change the string url using replace function.
View 4 Replies