best way to check if a textbox has only 4 numbers and isNumeric, for example i need to enter postcodes.I currently have:
If CDbl(txtPostcode.Text) <> 4 Or Not IsNumeric(txtPostcode) Then
MessageBox.Show("Postcode must be 4 Digits", "Error")
But the message box comes up regardless of whether there is 4 numbers, letters, or anything in the textbox. Its also used in the leave function of the textbox.
I have a textbox which has a numeric value that changes - would it be possible to check if that value matches two numeric values in a text file? and if the value matches then to display some text in a label? The textfile only has fields displayed like so
Horizontal 55
Vertical 16
So I would only need to check if the numeric field in textbox matches the two numbers in the second column. In the past I have use System.IO.File to create/delete/append to files but I havent come across anything like contains.
I am trying to create a program that can figure out all the different combinations of numbers in a string.
View 2 RepliesI am trying to check if a string is numeric but in vain. here is my code:
If Val(fnumField.Text.Trim) > 0 Or fnumField.Text.Trim = "0" Or Val(phnField.Text.Trim) > 0 Or phnField.Text.Trim = "0" Or Val(ophnField.Text.Trim) > 0 Or _
ophnField.Text.Trim = "0" Or Val(treeField.Text.Trim) > 0 Or treeField.Text.Trim = "0" Then
[code].....
I have a textbox that acts as a password field. It is supposed to contain a value at least 8 characters long and not greater than 12 characters in length. I need to construct an if statement that checks to see if there is at least 1 numeric character in the string and at least one letter in the string.
View 4 RepliesI validate TextBox for numeric and length no more then 7 characters. I'm checking for Not IsNumber and Len. But I want to give a user to save record when TextBox is blank.
View 12 RepliesI found a function that validates the numberic and decimal input for a textbox and works exactly like I want. But it does not let me limit how many numbers after the decimal. how to do this in the same function?
[Code]...
How would you verify a textbox if contains at least one numeric digit and one alpha character using loop?
View 3 RepliesI used a regular expression, which handles both numbers and letters in strings of arbitrary length, in one line of code.
dim rtn as String = Regex.Replace(input, "..", "$& ")
I'd like to take numeric strings of arbitrary length and insert a space every 2 characters.
So 1233456 becomes 12 33 45 6. Is there a way I can use format as string or IFormatProvider, like? That would put a limit on how long the string could be though, right? Since I'm casting to a long.
CLng((input)).ToString("## ")
I'd like to take strings of arbitrary length and insert a space every 2 characters.
123dssas4rr should become 12 3d ss as 4r r
I have been trying to check if a user has input a specific time format into a textbox.For example
1- User enters time in hhmm format
2- Checks the input
3- If wrong, MessageBox.Show("Need hh:mm time format")
I have only used IF statement with IsNumeric to check for number input but was unsuccessful with various attempts I can think of for checking a time format as I need Option Strict On and have the following error: Option Strict On disallows implicit conversions from 'String' to 'Date'.Is there a way to like check if the hh:mm has the ":" separator too?
I have an issue in VB6 that is giving me a major headache. When using a variable defined as a single data type, VB6 will add random numbers to the number i assign to it.
For instance I have a single variable that is manually set to 0.3. Then i create another single variable and set it to 0.25. I have the program add 0.01 to the second variable until it equals the first. But they never equal. I couldn't figure out why when both were showing they equaled 0.3.
[Code]...
I am having dificulties taking a datagrid cell value stored in the following location (datagridVNTPSorted.Item(15), irow).Value) into individual digits to reassign values for counters.
The cell in the datagrid (Listed Above) contains a number between 1 and 5624. I have 4 different counters. If the number was "2856", the counters would need to be updated as follows:
intdirectoryCountDigit1 = 2
intdirectoryCountDigit2 = 8
intdirectoryCountDigit3 = 5
[Code].....
I have a string I want to parse. I could write the code to do so, but I figured that VS.NET has a parser that should do this for me.however, I can't find it. All the searches I do return info on how to parse numeric values in string form into real numbers. It would be nice if the MSDN search had some ways to allow users to enter more details than just search text and 3 ways to filter out irrelevant stuff. In any case, I also tried things like string.parse (nope - although I kinda figured this would be it.) I also looked at Enum.parse, but the code indicates that it works with arrasy of items, not strings.
View 5 Replieswhat the following code is ment to do is generate a bunch of numbers between 1 and 49 using the while loop to check if two of these numbers are the same. Problem is two numbers are still being generated the same and I know that the numbers generated again will not match them originals so it stops the loop.
[Code]...
I'm realy green when it comes to programming but I like to think I am learning quickly. However, I cant figure out how to generate a number of random numbers baised on the vailu of a numeric slider. So for example I am generating a number between 1-12 where each point of value for the slider would generate an indiigual number that can all be added to a final total. I would also like to be able to back the slider down to a previous number and have the same total I had last time I was at position x. This is what i have so far:
[Code]....
I am trying to mkae sure that there has been 16 numeric digits entered into the masked textbox. If not show errror message and if so to call the fucnction ValidateLuhn. When calling Validate Luhn i want the program to tell me if the number entered is valid or invalid using the code in the function:
Private Function ValidateLuhn(ByVal value As String) As Boolean
Dim CheckSum As Integer = 0
Dim DoubleFlag As Boolean = (value.Length Mod 2 = 0)
[CODE]...
I have this:
dim nmbToCheck as Double = 15.22
dim nmb1 as Double = 12
dim nmb2 as double = 18
How do I check wheter nmbToCheck is between nmb1 and nmb2? I know I could use < and >, but the problem is that I won't be knowing which of the numbers will be smaller, and which will be larger, and it seems like a lot of code to write for such a small issue. There must be some sort of nmbToCheck.IsBetween(nmb1, nmb2) type solution to this, right?
I thought that this would be an easy way of checking if the txtBox only contains numbers. I was wrong.
if txtAnswer.Text = Not CInt("123456789") Then
I want the user only be able to put NUMBERS in the box. NO Spaces Commas Periods Breaks ... etc.
PS, i can't use NumericUpDown as the user needs to enter in the answer to an equation.
Is there also a way to make it so that there can only be numbers in a certain textbox?
View 12 RepliesI have a textbox and I want to preform a IF statment to see if there are only numbers in the textbox. How can I do this?
View 17 RepliesI am looking into making a text editor. I would like to include a line number feature. I understand that control creation is a feature of Visual Studio Professional. Are there any possibilities on doing this with Visual Basic 2008 Express. Do I even need to create my own control? Is there something else I can do?
View 2 Replieshow can i type with no numeric value? only alphabets is typed.. how is that?
View 7 RepliesDuring runtime i want a textbox to accept only numbers from 0 to 100.How to validate this textbox?
View 2 RepliesI have encrypted a string to something like this:
1. Asak2$)kla1015QAXKFskfa332aSJ2(Ska@Skljcmcel3p.lq,aowpqaskla2@)Skx.:Pdm^),dfs;
what i want to is convert this string to something like this
2. JXK2LB AP2WXB S1P0XE ZXPA3H X1LAKW DOXPS3
both 1 & 2 the above strings are fictitious (i made them up to make my point clear)
I am trying to make a licensing system for my VB 2010 express application. (2) above will act as a serial key which can be derived from (1) which is an encrypted form of something unique of the client computer.
I will then confirm the (2) from the client.
Private Sub NumericKeyPress(ByVal sender As System.Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox1.KeyPress
[Code]...
and it wont let me use backspace. How would I make it so I can use backspace?
With all the smarts of actually loading images being done by the .net framework, seems like I shouldn't have to repeat it all in my code by checking for magic numbers, or using a hack like this:[code]Am I missing something obvious, like System.Drawing.IsImage(stream)?
View 1 Repliesas seen in picture I have in "TextBox1" some numbers and I would like to have a detailed information on "TextBox2" (marked with red) when I pressed the "Process" button about them. In other words, I want the application to tell me how many numbers in total are inside "TextBox 1" and also to tell me if there are some duplicated numbers if it finds some of course?
View 1 RepliesI need to add a loop to allow repeated checking of ISBN numbers, which should check to determine when processing should be ended and should allow exiting the program without having to enter an ISBN before quitting. I also need to use a Select Case for the three ISBN possibilities (ISBN-10, ISBN-13, invalid ISBN length).
[Code]....
I have a customer form and want the customer to enter a passport number into the textbox and want to limit them to enter only 7 numbers and a letter.
View 1 RepliesI have this text in textbox
1. Kerumia - Prelila su se sum
8. Kadir Nukic - Gdje je moja srodna dusa
90. Crvena Jabuka - Jazz.ba
100. Man - Who leave
I want to
Kerumia - Prelila su se sum
Kadir Nukic - Gdje je moja srodna dusa
Crvena Jabuka - Jazz.ba
Man - Who leave