I am working on a way to change either the x or y value of a point and am getting an error while doing so. the code i am using to do this is the following:pts(currentNo - 2).X = pts(currentNo - 2).X - 10pts is a list of Points and currentNo is merely a count that im using to track where i am in the list. I am getting the following error
View 2 RepliesI have an array of structs and each struct contains values for the checkboxes. I am trying to display the checkbox values contained within a particular struct.
MyStruct is an array of structs which has a values for the checkboxes
ChkBoxCol is the collection of check boxes for the form.
I am iterating through the collection as follows:
[Code]...
What I am noticing is that if the check boxes are checked in order (checkbox 1, 2, 3, 4...etc) the code works fine and the values are displayed correctly in the form. However, if the check boxes are not checked in order (4, 5, 7...etc) the code does not write the values of the check boxes and instead keeps them blank. I just need to display the values for the check boxes for a specific struct.
I'm trying to extract a piece of text from within the string, defining both a starting point and an ending point. For instance, say I want to search for the text found between "That is a " and " car" in the string "That is a red car", so it would return "red".I know you can use .SelectionStart and SelectionLength, but the length of the word can change, so the selection length can vary. What I want is to establish a specific starting point and a specific ending point from which to extract the text from the string.
View 5 RepliesI want to know if its possible to loop in a variable and grab info from point a to point b
This is what I have stored in my Variable
PHP
</div> <!-- div reviews end white-space:nowrap; margin-bottom:5px; class="reviews" -->
<div class="list_address">
[Code].....
I've noticed through out VB 2010 that when prompted through the intelli window to enter a POINT variable, you can just substitue X and Y values instead and this works. How do you program that option into custom classes?Make something like the code below allow X, Y coordinates to be passed instead of a POINT variable...
Code:
Public Function GetCell(AtGridPoint as Point) as integer
'Returns the cell that the point is located in
End Function
Im using ZedGraph and want to do things as points are hovered over ("show point values" has to be on). is there an event i can harness that fires when you hover over points?
View 6 Repliesin order to create fancy custom end caps on the ends of a line, a structure like the following can be used:
Dim pts() As Point = {
New Point(-2, -2),
New Point(0, 0),
[Code]....
be used to create the same point array. I can see splitting these values into an integer array but how would these in turn be placed in a point array of whatever size is defined by the text values so they can be converted to end points of a line that is developed as values are changed in the text box.
I'm drawing polygons,lines,etc. and I have to have the points of each precise - up to 12 decimals. Since a Point only takes integer values, I'm not sure how to handle scaling. I have a working user control, but rounding the decimals so I can put them into points is causing incorrect calculations (area, ect.).
View 4 RepliesI hve been working with points a lot recently, and I have been wondering if there is a way to set a point without setting point.x and point.y separately. For example for (3, 5): Point1 = (3, 5) But that isn't right
View 4 RepliesIs there such a thing as a type similar to a point, but contains a pair of decimals, or a pair of doubles, rather than integers? I searched the forums and google with no luck. I can't believe this has never come up before, I must have been using the wrong search terms.
View 4 RepliesI have a background work reading an XML file. I want it to return an array of results which happen to be values.
I want to be able to place all the values as a point on a panel as an X asis which will be lined up with a y+10 pixels on the y axis.
I have the BGW reading the XML file and getting the values. all i need to know is how to return an array list or something similar to a can draw my line graph
In my datagridview, I want to be able to change the value of comboBox1 depending on what the user selects in comboBox2 I had this working correctly, however if I move onto a new line in my gridview and select a different value in the second row it changes the previous row also.In the below code the correct values are generated in the combo boxs, however when I move onto a new line in my datagridview and choose a different value from my comboBox I get this error:
"The Following exception occurred in the DataGridView System.ArgumentException: DataGridViewComboBoxCell value is not valid To replace this default dialog please handle the DataError event."
Private Sub Expenses_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.TblCompanyTypeTableAdapter1.Fill(Me.Exp_testDataSet10.tblCompanyType)
[code]....
All variables and Arrays have been declared properly the problem Is when the user enters a new number using a scroll bar
LottoNumber = HScrollBar1.Value
Label2.Text = "Number Selected: " & LottoNumber
The out put of the variable count stays at 1 so the output stays at (Pick # 1 of 6) and doesnt increment at all and does not build the OutPut string
'IF The LottoNumber Location Value is 0 in the Array selectedLotto THEN mark it by making the Loacation Value to 1
If selectedLotto(LottoNumber) = 0 Then
[Code]....
I want to loop through a databale and change the values of a specific column in that datatable.eg: the database returns Request_ID, Desc, Date and Status_Ind. The Status_Ind column contains integer values. I dont want to show the integer values to the user. I want to convert that to a string value based on the integer values returned in that columns.
View 2 RepliesIm trying to check to see if a value of a label changes over time. however I can't seem to get it right.
dim val1 as string
dim val2 as string
private sub form1_load()
dim val1 = label1.text
end sub
[Code]...
problem is it will only check it once after ten seconds when the timer is set to 10 seconds i need to to check it every 10 seconds becuase these values display altitude, and if the server freezes the altitudes dont change. I need to make sure they are updated and not frozen.
I'm writing a program to help me understand 3d points and how computers manipulate them to 2d. Every time I run the conversion routine in my program the value I passed to it get's manipulated even though I use the ByVal key word. Here is the code in process order , tell me if I missed something here ?
[Code]...
There is a status box for me to check one of the values :> This is the flow of what I have put together so far. The problem is once I run the program everytime I press the up key to make a call to the GetPoints method the value in MyPoint is changed to reflect the forumula in the getpoints method. I explicitly used ByVal in my variables on the method call so the values in the variable would not be manipulated. I've changed it many times but I can't seem to get the method to run where it does the conversion without manipulating the values in MyPoint. I've done similar things in visual basic .net 2003 , Now I am using the visual basic .net 2008 express edition. I don't if there is a difference in the two or some unknown bug.
My first time and first post here.I am trying to change specific registry key values (to enable fast user shutdown), but I get an error message when I try this. I will hopefully be implementing a number of the TweakUI functions, but in my own representation.
[Code]...
and I get the following error message:
"The specified RegistryKeyPermissionCheck value is invalid. Parameter name: mode"
(I've changed the Security.AccessControl options but none of them are suitable)
I've only been using VB 2008 for about 4 months now, and had no coding expereince prior to this
I have one hour format datetimepicker and other short format datetimepicker. When I select an hour from 1:00 AM to 5:00 AM want to change the current day to the day before. I tryed to - 1 day but doesn't work or maybe isn't the correct way to do it.my error says operator '-' is not defined for types 'Date' and integer
here's my
Dim hora As Date
Dim fecha As Date
hora = Me.dtpHora.Value
fecha = CStr(Me.dtpFecha.Value)
[code]....
I have a Diagonal line drawn on a picture box on my forum and i need to know if the user has clicked the line I have the Start point and End Point of the Line and the mouse x,y location So i basically need to find out if the x,y of the mouse is on the line.
View 2 RepliesI have a project due tonight and suddenly 2 of my datagridviews are acting funky while the others are fine.
I have 2 tables in an sqlce db. the first is books(id, title, copyright) and the next is publisher(id, name, bookid). I'm writing a vb.net frontend to access the data.
I have data bound datagridviews for both tables. Both have their respective ID columns hidden. The publisher dgv uses a combobox cell style to display the book title in the bookid column. So far so good.
I have suddenly run into a problem where if I have clicked in a cell on the books dgv and then click a cell on another row, the title changes to the id value. The publisher dgv also updates to show the id instead of the title.
It sounds to me like there may be a problem with the booktableadapter or bookbindingsource, but I don't know where to start looking for it. I have a 3rd dgv referencing an unrelated table, and it has no problems. The code for both the working and problematic dgvs are the same (only the control names are different).
There are 2 subs. First one populates a DataGridView with data from a SQL table:
Dim SQLCom As SqlCommand
Dim myDA As New SqlDataAdapter
Dim myDS As DataSet = New DataSet()
[Code].....
I have a grid bound to a datatable. The grid has two boolean fields. What I want to happen is, when the user checks one field (or perhaps I change that field's value in code), I want to automatically uncheck the other field. I tried the following code, and it gives me the results I'm looking for, but only after the user leaves the row. I want it to happen when the user clicks on the cell.
Private Sub ComparisonGrid_CellValueChanged(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles ComparisonGrid.CellValueChanged
If e.RowIndex > -1 Then
If e.ColumnIndex = Me.FirstUseColumn.Index Then
[Code]...
I have a web.config file on my computer.There are alot of things i need to change and add in the file. (I am actually working with my SharePoint web.config file)Can i do this with a Batch file, if so how would i do it. Or how would i do it using VB.NET or C# code? Edit: i need to create a program to alter a web.config of lets say i web.config laying on my deskop and not the actual web.config of my project
View 7 RepliesHow to set up a Chart using the new MS Chart control. I want to be able to populate the data via SQL because the user will be able to dynamically change the values via drop downs. The format of the data will be the same (Qty, Time Period) but the Focus of that data will change. I'm honestly not sure where to start, I can draw the chart but I have no idea how to populate it with data via code so it can be changed dynamically.
VBE 2010, and I'm hitting an AccessDB
I have been dabbling in VB before and i played around wiht linq to sql back then but im wondering what i should go with here.I need to have a list of people.. They should all have their own id nr.
The people in the list are supposed to keep a record of values changing over time with a datetime stamp. (In my case its numbers from a test outcome of blood)You have to be able to add people and delete people. All records will be deleted too.A Chart will read information from the records and display changes over time in chart.I was thinking of doing it with linq to sql and i was kinda aiming at Creating datatables with id names from the script
Havent found a way of creating datatables from a script though..I was hoping for a solution like that.. And i was hoping id be able to search databasetable names.
I have a form which has a user control in it added dynamically. How can I change the values in that dynamically generated user control? All my functions are in a module and I will just call them in main form. So in module how can I find that user control and change its values? I tried writing a function in user control form. Like it has 10 txt box and I tried to pass a structure as argument in that user control form but I am unable to do so. when I tried to declare the structure outside function parameter in user control form it works well but not as function parameter..
View 6 RepliesI want to programatically delete some pixels that are unused in order to reduce the image size.Can anyone tell me how to reduce the size of an image file without changing the pixels values..
View 1 RepliesI am making my project for this semester. I am making "System monitoring Tool" so i have make a GUI and also get the all parameters but one thing missing I have tried to find from different places but not found that is the "continues line" that represents the changing values of CPU usage along time. same like "windows task manager" shows.
View 1 Repliesi have a picturebox which displays a map i have 2 modes add point and delete point when the user clicks the picture it creates a point on the picture where the user has clicked that works perfectly its when i try and delete the point when it doesent work :/ i have all the points loading from an xml file this is the code i have:
[Code]...
basicly i want it to when the user clicks the point it fines the x any y in the xml delete the node then delete all the points on the map then reload them all according to the xml
[edit]oops - stupid typo - this is resolved and explained in the next post[/edit] I've got a BINDING SOURCE - that I bind to controls - textboxes mostly. I create a row in the datatable behind this BINDING SOURCE like this.
[Code]...