I'm drawing some text into a picture box and it just looks so poor - so pixelated.
Here is some code I'm using
Private Sub RedrawFileList()
Dim img = New Bitmap(PictureBox1.Width, PictureBox1.Height)
Dim gr As Graphics = Graphics.FromImage(img)
[Code].....
In the project I am translating from vb6 to vb.net, one of the key features is in drawing various graphics like lines, circles, arcs, rectangles, etc in a Picture Box control. From what I have run into, there seems to be at least two different approaches, using WPF and GDI.
View 2 Repliesstudying GDI+ for drawing, there are many suggestions to expose the graphic surface for the paintbox control or a form using e.graphics in the paint event. Can graphics be exposed outside the paint for the picture box control?
In my old vb6 project that I am converting to vb.net 2010, I have several large routines located in a code module that draw lines, circles, etc on a picture box and it is desirable to keep these outside the paint event of the picture box so the same routines can be used to draw on more than one picture box.
In experimenting, I found I can create e.graphics from the picture box paint event and pass it by reference to a drawing routine and the drawing routine seems to work ok on initial experiments but it requires visiting the picture box paint event to get the drawing surface in the external sub.Is this apprach good programming practice or is there a better way to create the graphics surface of a picture box or form in subroutines outside the paint event?
Is it possible to draw text on a Graphics object that inverts what it's drawn on?
View 2 Replieshow to Draw text directly to the screen - effectively overlapping anything underneath it - but have it out side a form area! I would really like to have no user interface at all if possible I know what I wanted after recently using FRAPs.
View 8 RepliesI drew some shapes on a picture box , then when i move the form outside the bounds of the screen or move another form on it , all the shapes go away.I am using "CreateGraphics" to create the shapes.How can i keep the shapes on the picture box?
View 6 RepliesI've got an array with several 'x,y values'what I want to do is to go through this array and to draw those values in a picture box so that I can see a kind of profile.
View 9 RepliesI have my application to where you can load up an image and draw on it with the mouse left down and drag.Only problem is, if the form becomes the inactive one or is minimized/maximized the drawings go away until I scroll the image in the form (I put the redraw functionality in the picturebox.Paint event).How can I make the lines I draw stay permanently? I've put picturebox1.refresh in the minimizedchanged/maximizechanged and form.activated events and still nothing..Even tried the picturebox's resize event and nothing?
View 18 RepliesI need code to build something that if I record the image in textbox1, etc. I keep one whole picture ..
View 6 RepliesHow can I zoom into monitor to see a pixelated image of the screens content?
View 2 RepliesI'm trying to make a custom text box, using a picture box and a label. Here's what I want a code for: If the user clicks the label, I want it to act as a usual text box does. I want the label to become editable, to have a blinking cursor, and all that kind of stuff.
View 1 RepliesI'm making a custom control that needs to look like a Text Box but I can't Inherit Directly from text box since I need to add, Change and Override so many things that it would be more practical to just inherit Control and start new.
But now my question is: Is there an easy way to create the basic functionality of a Text Box like drawing the Text Box and handling input ?
with a college assignment. We are to make a program for a school class. It is on Flags of Europe. A Picture Viewer should show a flag and the students must type what the flag is in a text box. If it is correct it must say so in a label and display the next flag. I want it to add the correct answers the student got out of 10 flags.
View 4 RepliesI'm looking to see if a little more control is possible though. cpustring = string and fontstring = font, both defined earlier in the program.I'm not sure how to clear the drawn text before drawing a new text. I tried with g.clear(color.transparent), but that creates an ugly flickering background for the picturebox (the picturebox is already set to transparent background).I'd also like to be able to fit the text in the picturebox area, max width/height as defined by picturebox, not by fontsize. Font can stretch either way as long as it fills in the picturebox.
View 6 RepliesPrivate Sub UpdatePictureBox()
pbShowImage.Image = lbAddImage.Text
End Sub
what should it be?
I am trying to draw some multi colour text onto a form using the paint event and the GDI+ object (note it has to be done using the GDI as i will be needing to scale and do bmp pixel manipulation on the resulting graphic . I have so far managed to create a class and collection winch allow the user to move the text around and change the displayed string, font and colour.
My question is how can i change my class so that it draws multi colour text? and if possible allow the user (uinsg the mouse to graphically select parts of the text.
Below is a work link to the project so far:-
[URL]
I have a form populated with controls. Short of looping through every control and hiding them, is there a way I can draw something like a message over them using the form's paint event? Or would I be better off putting an actual control in the middle of the form over all the controls?
View 3 RepliesFinally took the plunge for wpf, all was going well until i needed to do a simple drawing on a canvas control (presume this is the right surface to use). First thing i noticed is that there is no paint event in wpf so i looked at a few others (Initialized, layout updated) at this point i looked under google and found very little on this. would anyone here have or know of a tutorial to allow this functionality? My application (a testbed) will draw an archery target within the canvas along with score numbers in the correct place as follows to do this it will need to draw several filled circles with black (or white) borders and text objects in the correct position. the locations and widths of the circles will be determined using a simple algorithm so my question is on the structure of paint events within wpf, are the commands the same as in gdi+?
View 3 RepliesI currently have a application that takes a image of the selected area that is set by the user.
I now would like to draw a black box in the section of a image
Top left
7, 458
Bottom right
512, 472
I would like that area filled up with a black box.
I have a Custom Groupbox that overrides the OnPaint event to do some custom drawing, backgrounds, etc. The problem I have is that when I use it in an application and want to draw text on the control, it gets drawn first, then immediately afterwards the OnPaint from the control gets called and draws on top of the text. Is there any way to get the text drawn after the control's OnPaint?
View 5 RepliesFirst, the overall objective is to find the best point within a multipoint filled 'star', at which to start drawing text. That is, depending upon the size of the star and the number of points, there is a larger or smaller area within the points that is filled with colour. So a 5 point star has a relatively small area that is filled, in which to draw text. A 40 point star of the same radius has a much larger area filled. If I can determine the size of this area as a rectangle, then I can measure the string and draw within it using the best fit font and starting position. The code below is an attempt to answer the question but I am stuck trying to find the text area rectangle within the filled portion of the star. Some of the code exists purely to explore the means to determine how to identify this rectangle (and is probably the totally wrong direction).
The second part of the problem is in exploring the options, I tried to draw a vector to different points on the circumference of the star. This is the code highlighted. The lines drawn do not seem to be the correct length nor the correct angle but I cannot see why.[code]...
i have used this code in Vb6 to color the background and parallely added a colo selection fuctionality on right click.Now i want the functionality to be working in VB.net 2010.
Me.BackColor = System.Drawing.ColorTranslator.FromOle(CInt(colorCode))
I've problem with clearing the drawing in PictureBox. The parts of a drawing are created with PictureBox1_ Paint Event like this: Name is one of the Subs (just part of a drawing). I've created a second event Timer1_Tick in which I want to clear the drawing created before but I can't reach it just with g.Clear(Color.White).
View 8 RepliesI'm trying to draw some kind of circle diagram. Input data are only two integers: "a" (even or odd) and "b" (even). Here is the
HTML Imports System.Drawing.Drawing2D
Public Class Form1
Dim P As New Pen(Brushes.Red, 1)
Dim a As Integer = 24
Dim b As Integer = 2
Dim Angle As Single = b / a * Math.PI
[Code]...
I have been working on an angle calculating program. I have incorprated a feature so you can type the angle and the program draw it. I have since added a few new features and updated everything as such. For the life of me I can't figure out why the draw angle has stoped working. let me just paste some code.
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Data
[Code]....
Right, the program isn't so complicated. The important bit is that you type an angle in textbox1 and hit enter. Then what happens is the angle is calculated against a base line (one of the new features is that this base line can be moved from left to right and center.) the problem occurs when you hit enter, the program doesnt actually draw the line for you.
I am refining my VS2010 control renderers and I'm working on the TabControl at the moment. If you take a screenshot of the VS2010 IDE and zoom in on the background of the TabControl (where there are no tabs), then you might see that it consists of a pattern of dots with a slightly different color than the surrounding background. I am trying to draw these dots (yes, I'm going for perfection), but I cannot find a brush that allows me to do this.I am pretty sure I'd have to use a HatchBrush with the right HatchStyle, but I cannot find a matching style.Here is a screenshot showing:
1. The VS2010 background I'm trying to draw (higher contrast and brightness otherwise it's hardly visible),
2. The HatchStyle that is closest to this (DottedDiamond)
3. Why this HatchStyle is not correct (it's missing dots where the green dots are, which I photoshopped in).
Now of course I'm going to have to draw the pattern twice (there are two patterns, offset by 1 pixel, with a slightly different color), but the more pressing problem is the green dots seen in the third image. They aren't there with the DottedDiamond style, and no other style (I think I've tried them all, but hey I might have missed some..) produces a better output.
I have 4 control 3 button and 1 picturebox
vb.net
Private sub Button1 Dim bm As Bitmap = New Bitmap("D:Trening4 - Copy.bmp"
[code].....
I am trying to make a drawing program that you can draw floor plans and the like with vb .net 2010.I know how to use gdi but I need to know how to draw lines that are scaled in inches and feet.Can anyone out there help me out with this problem?I have tried the dpi x and y but it only gives me the resolution which is 96 dpi.
View 3 RepliesMy goal is actually very simple: I simply want a (shared) function that accepts a List(Of String) which creates an image and writes those strings (line by line) onto the image. There's a bit more to it than that, but for the sake of example this is all you need to know.Usually when drawing on an image I would create a Bitmap object and get the graphics object from Graphics.FromImage:
Dim bmp As New Bitmap(100, 100)
Using g As Graphics = Graphics.FromImage(bmp)
g.FillRectangle(...)
[code]....
Seems easy enough, but the problem is that I don't know how many strings there will be in the list, nor how long they will be. The image should 'scale itself' according to the strings in the list. If the list contains 5 strings it should be 5 strings high (plus a little extra for borders). If the list contains only 1 string it should be only one string high. Same goes for the width, if the longest string is 150 pixels, the image needs to be at least 150 pixels (160, 170 or something).
This is all good, I can get the dimensions of the strings by using Graphics.MeasureString. The problem now is that I need the dimensions of the image to create the bitmap. I need the Graphics object to get the dimensions. But, I need the bitmap to get the Graphics object I'm stuck in a loop here, if I don't have the Graphics object (I can't create it from nothing..) then I cannot measure the strings, but if I cannot measure the strings then I cannot determine how large my image will be, so I cannot create a bitmap and associated Graphics object...
I'm trying to save the lines I drew in a PictureBox as a bitmap, but it just returns blank images...This is the code I have now:
vb
'Draw a grid on PictureBox named draw
For x As Integer = 0 To bWidth
[code]....