loping application to make bootable USB drive, for that i wants to format usb drive.but I couldn't find any way for the same.I got solution that suggests use of SHformatdrive(), but how can i include that function.I am using VB 2010 (VS2010). Is there any different way
View 8 Replieshi, i am writing vb 2010 (VS 2010) application for making bootable pendrive. For this, i want to format USb drive, but i cant find any suitable way. I found the use of SHFormatdrive() function, but is there any suitable way..?
View 6 RepliesI am writing a program in VB 2008 and need to search for SD Card Slots and monitor them. When a card is inserted I want to check for a files and folders and make a button active to upload the data. I take it this needs to be working in the background as I want to be able to perform other functions while monitoring fo the drives.How would I do this and can you check if a removeable drive is SD/MMC, CF, MS, etc?
View 3 RepliesI configured access control list for the local drives using System.Security.AccessControl
I need to configure it for removable drive .
I'm quite new to programming and I am working on a project. The aim is to automatically run a backup process once a removable drive is inserted.So far I've been using this piece of code[code]....
This obviously only runs once unless I use a loop or timer, however both of those will cause the backup process to loop as well.
I am trying to use the WMI code generator, and it has given me some code, the idea is I want to see where the pagefile is and its size etc. The code I have is
[Code]...
how can i map network drives using visual studio 2010?I would like to map multiple servers when running my program.
i.e
X:\ip or servername
Y:\ip or servername
would be automatically mapped into my computer when i run my program.
I'm playing with a simple string replacement editor for editing VB.Net functions outside of VB. Is there a way to apply VB.Net code formatting to a string?
For example. The txtboxCodeEntry looks like this:
If strVar="dummy" then 1 else 0 Endif
I would like it to "autoformat" to:
If strVar = "dummy" Then
1
Else
0
End If
The formatting would match whatever formatting VB.Net does when you're editing code in the Visual Studio IDE.
It's not a coding problem. I can't seem to copy my coding in to word without it losing all of the colour. Is there any easy way that I can copy and paste this code in to word without it losing all of the formatting?
View 2 RepliesDoes anyone know of a way to contain a nonbreaking space in an html tag to allow me to remove it based on conditions tested during runtime in the code behind?
Basically why I need this: if a condition is satisfied I will have 4 buttons, but if it's not only three. I can remove the button but then I have 4 in-between 2 of the buttons instead of just 2 .
Something like the <del> tag would work if it didn't strike through the text.
Basically I have something like this(propery values not included for simplicity):
<td><button />  <button />  <button />  <button /></td>
I can't have the function in the actual button tag because then it will render the   instead of the button text.
I seem to be stuck here. How do I loop through all the drives? (This question has been resolved)
NON-WORKING CODE:
Dim InfoDrive As System.IO.DriveInfo
For Each Drive As
[code].....
I want to write a program that will log all the files that has been copied to removable device. I tried to work with FileSystemWatcher but I didn't get the result.
View 3 RepliesI'm not sure if this would be this right place to post this, or even if I should go about trying to do it through my program itself or through the computer's settings on the final EXE file, but anyways, here goes.
I have a synchronization program that syncs my flashdrive to my home computer and (hopefully) my flashdrive to my personal folder on the school computers. What I think would be easiest, though, would be if the program was located on the flashdrive, and would simply "autorun" when I plug it in, instead of having 2 separate instances of the sync program running at school and at home.
Would it be easier (or possible) to code for that from within the program, or with the EXE file's settings?
formatting a USB Drive?
Imports System.Reflection
Imports System.IO
I've developed a MySQL chat app that I have in my program. It works perfectly, however all of the text is the same color. I use a silver-on-black scheme. I'd like to do 1 of 2 things, whichever one is.. er.. "more possible". The first option would be simple - alternate each row's back color. So that one row would be silver-on-black, the next row would be black-on-silver, and so on alternating. Each row is separated by a "vbCrLf". The second option would be to merely bold or turn to white the info text. Here's the format of the chat messages: [{time} - {user}] {message}. I would want [{time} - {user}] to be bold and white. Are either of those 2 options possible? Well, I know they're possible
View 1 RepliesI have been searching for a way to format output using writeline/write (streamwriter)using RTF tags and wondering if there is a syntax for this, if it exists. I have not been able to find a resource which clearly explains how to "pretty" up output sent to a file.
The reason why I am asking is because I want to "print" results from my program into a file that, at the very least, would be centered, tabbed and even bolded where possible without requiring the user to go and futz with it. I think I saw that Crystal Reports won't work with VB 2010 Express and, quite frankly, just want to create a file with output.
[Code]...
I was using VB6 and all my text formatting is stored in a database from the way VB6 stores it. How do I apply this formatting to a rich text box in VB 2010?
View 6 RepliesWhen a certain form (containing a datagridview (dgv)) is first loaded, the dgv cell formatting event is triggered by the line
dgv_WorkHistory.DataSource = ds_WorkHistory.Tables(0).DefaultView This successfully adds some background colour to a few cells in the displayed table. After this the next line of code is executed. The problem is that if I then try to load a different table (by choosing one from a listbox), the new table displays OK but without the desired formatting. Why?
Stepping through the code I find first of all that when I click on the listbox the dgv cell formatting event is instantly raised (immediately, even before any code in the listbox click event is executed). Why does clicking on the listbox trigger the cell formatting event?
Then, when execution reaches the line quoted above for the second time (remember it triggered cell formatting the first time round) it doesn't this time trigger it. The next line of code is executed instead. Why has the behaviour changed?
I have some text displayed in a richtextbox from an xml. This is how is shows upHaste <i>(As soon as it comes under your control.)</i>At the beginning of the end step<i>The storms of the wastelands form quickly and hit hard. Few have anything to do with rain.</i>
View 1 RepliesI have a program that creates a excel spreadsheet and a chart on each tab from extracted data in various .txt files. Before the chart is created, two of the excel columns will end up with data like this: on column 9 and 10. I also use data (time, looks like 09:15) in column 11 that shows the time at the bottom of the chart. There are just too many digits in the output and the readability looks bad so I can also convert.
Input Output
800400047320000
825400047120000
[code]....
The chart will display those values just fine but, normally the conversion in code that I do during the placement of that data (so it reads a bit better) looks like this:
'Convert bit to Kbit
If InRate.Length < 7 Then
InRate = CDbl(InRate) / 1000 & " Kbit"
[code]....
how to make the chart work with just numbers and ignore the MB or Kbit at the end?
I have set up a form that will act as my parent (this hasnt been set up as an MDI).On this form I have a Panel that I will be loading forms into. I have a form that contains a DGV. On the load of the parent form, I then load this "child" form into the Panel. In the onLoad event of the "child" I go off to the database and populate my DGV. Then I run through the rows in the DGV and add in a logo image in the first column and change some cell colors based on values in those cells.
This all works great, however, when the child form finishes loading all the changes are lost. eg The logo images go back to the red cross and the cell coloring is gone.If I call Me.Refresh() in the child window as the last line in its Form_load event I can see the logo and cell colors update to what I want, but as soon as it has updated, its like it immediately refreshes again and all the changes are gone.
I'm updating a program that was written in an older version of VB (by someone else) and I can't figure out to how replicate this data entry line in my Form.
Each textbox can be changed and there is a nice scroll bar at the bottom to move left and right as you enter each datapoint.
I tried using multiple tabs within a Panel and setting the Appearance to FlatButtons, but the text area under each tab gets covered when you select another tab.
I need to take a string of any length & make it exactly 5 characters long by either truncating it or padding it or neither. So "abcdefgh" becomes "abcde", "abcde" stays "abcde" & "abc" becomes "abc " (2 spaces at the end).
I currently use this line of
Microsoft.VisualBasic.Left(myString, 5).PadRight(5, " "c)
it works, but it seems very hackish.
For some reason, I can get the first chart to become formatted using the code below, but the other 4 won't format properly. I had a similar problem with the DataGridView's, but I moved all of the with statements before I adjusted the Charts and they now work. I can see no reason why this would cause only one chart to be formatted and the rest to stay blank. The code was copied and renamed in the With statement for the appropriate Name of the charts.
[Code]...
I have:
1 ComboBox(cboCultureInfoNumeric) with the required CultureInfo.
1 Textbox(txtNumeric)
1 Label(Label1)
When the user change the Culture info the decimal point or comma change in the textbox(txtNumeric) nicely.What i try is to change also the text in Label1 by the culture info.If the user change the CultureInfo to German the Label1.text = �German�If the user change the CultureInfo to Spanish the Label1.text = �Spanish� And so on�
What I have do is :
1 - Set the Form1 Localizable property to true.
2 - Set the form's Language property to "German (Germany)".
3 - Set the Label1 Text property to "German".
VB make the file -> MainForm.de-DE.resx with name: Label.Text and value: German
4 - Set the form's Language property to "Spanish (Spain)".
5 - Set the Label1 Text property to " Spanish ".
VB make the file -> resx
6 - Set the form's Language property to "French (France)".
7 - Set the Label1 Text property to "French".
VB make the file -> resx
8 - �The TextBox with the numeric value�s change when the user change the CulureInfo but not the Label1, why?It work perfect when I put �Thread.CurrentThread.CurrentUICulture = New CultureInfo("fr-FR")in the MainForm.designer.vb before InitializeComponent function and in the New function.But I want to use the ComboBox�
I have some VB .NET software that interfaces to a load of old (but sound) COM objects. The VB provides a GUI for the COM objects, part of which consists of setting various options on the COM objects - several of which relate to string formatting.I have a simple pair of VB .NET functions that convert basic %f, %d, %g formats to/from .NET equivalents using a large select case covering specific common strings, but they don't cover all formats.[code]Before I start diving in and making it more versatile with some parsing, does anyone know of a class (eg VB or C# .NET) that provides a decent ready-made implementation? Or perhaps some regexp wizadry could be used?
View 2 RepliesI'm filling a DGV by setting it's datasource property to a datatable, but for a DateTime columns it doesn't show seconds.
View 4 RepliesI have now started posting to a MySQL database created by someone else. I have no ability to change the table structure.Two questions:
1) There is a date field and a time field that loosely tracks the last edit date and time. Both are fields set up as DateTime in the database. The date field always has the proper date but the date and time portion shows as
2011-11-27 00:00:00
However, the time field shows as
1899-12-30 23:16:58.
When I am updating with the following code
strSQLCmd.Parameters.AddWithValue("@EditDate", Date.Now)
strSQLCmd.Parameters.AddWithValue("@EditTime", TimeOfDay)
The date field displays
2011-11-27 23:40:26
and the time field displays
0001-01-01 23:40:26
I'm not sure how to format the date field without time and the time field with Dec 30 1899.Question 2) I will be adding some tables and will be wanting to track date and time of first entry as well as date and time of last edit. (this may have been better posted in the Database forum, if so, sorry)
For those of you who have done this before, would you mind sharing best practises? I am wondering why would you use two fields, one for date and one for time, when the field is a date/time field to begin with. I've seen this before in another database as well. I'm just trying to work out the logic here.
I have to create a program to manage a large number of USB Thumbdrives. In short, the drives will contain corporate images used by technicians to prep machines in the field. I do not have to create the images as they are already provided. Since I have to create 50 plus of these at one time, I am looking at writing a program to automate the process. As it stands now, formatting, partitioning, and copying the image to each key individually is, as you can understand, not efficient time wise. I have already purchased two industrial quality 7 port powered hubs.
The plan is to be able to: Fill all 14 slots in the hubs with USB ThumbdrivesUse the program to select the drives to prepareHave the program format and partition the drives (bootable)Copy the contents of the image folder provided to the USB keys. The idea is to do the above by filling all the slots and hitting one button, then walking away to do other work. When done, the drives would be ejected, and the next set of 14 installed.
I have already created the User Interface. It consists of: 5 buttons (Scan For Drives, Format Drives, Build Drives, Build And Format Drives, Exit).One "Select Source" entry field to select the source of the Image Files.One Checked Entry List. This is where all available drives will be listed, and the one's desired to be checked.
Now, it has been 20 years since I did any coding, and all of that was done in languages that are pretty much dead today (Turbo Pascal, Clarion Professional Developer and R:Base), so to say I'm behind the curve is an understatement. While I was never a real fan of Basic, I have some experience with it. But today's VB.Net ain't your daddy's basic, and there's no way I have time to learn C or C++. I have the Express version of Visual Studio 2010, which should be fine for this project.
I have some lines of text in a listbox that I need to format. The text originally looks like this (on one line):
GND,CAL1.2 CAL1.3 CAL1.4 CAL1.5 CAL1.6 CAL1.7 CAL1.8 CAL1.9 CAL1.10 CAL2.2 CAL2.3 CAL2.4 CAL2.5 CAL2.6 CAL2.7 CAL2.8 CAL2.9 CAL2.10 CAL3.2 CAL3.3 CAL3.4 CAL3.5 CAL3.6 CAL3.7 CAL3.8 CAL3.9 CAL3.10 CAL4.2 CAL4.3 CAL4.4 CAL4.5 CAL4.6 CAL4.7 CAL4.8 CAL4.9 CAL4.10 CMS1L.2 CMS1L.3 CMS1L.4 CMS1L.5 CMS1L.6 CMS1L.7 CMS1L.8 CMS1L.9 CMS1L.10 CMS1U.2 CMS1U.3 CMS1U.4 CMS1U.5 CMS1U.6 CMS1U.7 CMS1U.8 CMS1U.9 CMS1U.10 CMS2L.2 CMS2L.3 CMS2L.4 CMS2L.5 CMS2L.6 CMS2L.7 CMS2L.8 CMS2L.9 CMS2L.10 CMS2U.2 CMS2U.3 CMS2U.4 CMS2U.5 CMS2U.6 CMS2U.7 CMS2U.8 CMS2U.9
I need to format it (if it's more than 13 names), then add it to another list looking like this:
NET 'GND' R1-2 R2-2 R3-2 R4-2 R5-2 R6-2 R7-2 R8-2 L1-2 L1-3 L1-4 L1-5 L1-6 L1-7
NET 'GND' L1-8 L1-9 L1-10 L3-2 L3-3 L3-4 L3-5 L3-6 L3-7 L3-8 L3-9 L3-10 L4-2
NET 'GND' L4-3 L4-4 L4-5 L4-6 L4-7 L4-8 L4-9 L4-10 L7-2 L7-3 L7-4 L7-5 L7-6
NET 'GND' L7-7 L7-8 L7-9 L7-10 L2-2 L2-3 L2-4 L2-5 L2-6 L2-7 L2-8 L2-9 L2-10
NET 'GND' L6-2 L6-3 L6-4 L6-5 L6-6 L6-7 L6-8 L6-9 L6-10 L5-2 L5-3 L5-4 L5-5 .....
[Code] .....