VS 2010 IDE - Vertical Split Of Class Code Window
Oct 1, 2011
I'm trying to use one project as a reference for writing another project, and I want to see as much code as I can from that project on another monitor. Since Code is only so wide (assuming you break-lines), I have a lot of wasted horizontal space. Is there any way in the IDE to do a vertical split of a class code window? I know you can do a horizontal split, but although that shows you two sections of code at once, it doesn't increase the amount of code you see, because it sacrifices one code's space for another.
View 5 Replies
ADVERTISEMENT
Oct 29, 2009
I have a windows form which contains a group of panels in a flowlayout control. Each panel has a button acrossthe top which is always visible and clicking on it expands the panel to view the other controls on it. clicking on it again shrinks the panel back to the size of the button. A simple form of menu. The flowlayout control has autoscroll enabled and as enough panels are resized (opened) they obviously are too big for the form and a scroll bar pops up.To get the most recently opened panel in the viewable area I use
FlowLayout.ScrollControlIntoView(pnECBF)
where pnECBF is the panel just resized. This works but places the panel at the bottom of the form i.e just in the visible area. I want the user to be able to see the panel AND the next menu button which is on the subsequent panel. So basically what I want is the panel into the visible area +25 pixels for the next panels menu button.
View 4 Replies
Aug 3, 2011
It seems when I change some code while working with practice files I get green veritcal lines in the left margin of the code page I am writing. What does it mean?
View 1 Replies
May 6, 2011
I am trying to write code for a login to my program. But the code I have written freeze's the screen. Basicaly I want to check if username (TextBox1) has text in it and then check if password (Textbox2) has text in it. if either textbox has no text then a MsgBox show's with an OK Button. and then I dont want the program to run. I want The login form to reload so the user can insert thier username & password. the code I have is below.
[Code]...
View 3 Replies
Aug 11, 2010
Does anyone know how to do one?
View 10 Replies
Aug 29, 2011
I'm using a vertical trackbar. I got it all set: minimum and maximum values, tickfrequency etc... and so on... everything works great. The only problem is that I would like to have the minimum value of the trackbar on the top. In horizontal trackabar you can choose the RightToLeft property to put the minimum value to the left or to the right, but how do I make it to put the minimum value on the top if I have it in vertical orientation? There has to be a way to somehow "flip" it... but how?
Here is a link to video on youtube, which show my problem. I want it to be the other way round - from top to bottom: [URL]
View 3 Replies
Aug 14, 2009
I'm having a bit of trouble learning the uses of partial classes. I know they are used to split a class into several pieces for convenience but I don't understand how to put all of this into play. I'll show you what I mean here:
Lets say I have an interface named "ICar":
.NET
Public Interface ICar
Sub TurnOn()
[Code]....
OK, now that I have all of that, how do I put it to simple use in my partial class "OffRoader"? (You can add a "console.writeline" event to the methods if you want, in order to show me the uses of these partial classes.)
View 3 Replies
Feb 18, 2009
I have data in this format: [URL] which can be random in the amount of sections, etc.I want to split it so i can then use the data in my windows form, this is how to decode the data[URL] am struggling, ive got the file already split, as metarItems = Split(metarData, Environment.Newline) so metaritems contains the individual lines.The first 2 parts are always the same, ie EGBB 181320Z are always in same place?
View 2 Replies
Feb 7, 2011
vb.net 2010 development environment, Windows XP.
My application displays a data entry screen consisting of rows and columns of text boxes and combo boxes.
Photo attached.
all the controls are created and placed on the form in code.
On a Windows XP machine (where the application is developed) all the controls line up perfectly. However, on a new Windows 7 machine, the result is as pictured in the attached photo. It seems that the combo boxes are slightly taller than the text boxes.
I have adjusted the .height property of the combo boxes, as well as text boxes, but to no avail.
Both the XP machine and the Win7 machine have different screen resolutions. Is that a possibility, and if so, is there a way to size the controls in a resolution-independent way?
View 4 Replies
Jan 10, 2010
I set the Scrollbars property of textbox to ScrollBars = Both but the textbox shows only the vertical scrollbar. (i already set the Multiline = True)
View 2 Replies
Apr 17, 2011
I can find lots of examples of rotated text on graphics objects on a Google search, but I want to create a vertical caption but with normal letter orientation, something like this:
C
A
P
T
I
O
N
but with sensible spacing and alignment. I can't seem to get my search terms right to find a suitable example. Can anyone point me in the right direction?
View 11 Replies
Apr 1, 2010
I'm having some trouble compiling some VB code I wrote to split a string based on a set of predefined delimeters (comma, semicolon, colon, etc). I have successfully written some code that can be loaded inside a custom VB component (I place this code inside a VB.NET component in a plug-in called Grasshopper) and everything works fine. For instance, let's say my incoming string is "123,456". When I feed this string into the VB code I wrote, I get a new list where the first value is "123" and the second value is "456".However, I have been trying to compile this code into it's own class so I can load it inside Grasshopper separately from the standard VB component. When I try to compile this code, it isn't separating the string into a new list with two values. Instead, I get a message that says "System.String []". Do you guys see anything wrong in my compile code? You can find an screenshot image of my problem at the following link: click to see image This is the VB code for the compiled class:
[Code]...
View 2 Replies
Aug 29, 2010
With no answers from Google and not finding the answers by searching, just curious as you were to go about simply giving a ListBox a horizontal scroller once it passes its visible border the same as the vertical does?
View 3 Replies
May 2, 2012
Excuse me for posting this, but I have searched both Google along with this forum before asking this question, maybe I'm not using the right keywords but I apologize if it's easy to find.I would like to know how one could close a third-party window (application) if a specified string was found in the window title.
View 2 Replies
Mar 1, 2010
I need to create unit testing project for my current website. The currentw ebsite si written in VB. All unit testing examples are using interface to create mock object. My current VB class does not implment any interface. Can I add interface and implement it to my current class and functions without affecting or changing codes to any pages in my website that call the functions? For examples my current class is like:
[Code]...
View 2 Replies
Aug 21, 2010
How can I get the handle of the window that is below (or behind, whatever you call it) the foreground window?
View 2 Replies
Jul 21, 2011
For example, I have string variable (MyString) as below.MyString = "First word || second order || third example || fourth item || fifth stuff"
There are separator "||" at MyString variable. I want MyString variable is spited based on separator "||"and stored it into new array variable.
Could you advise me the most efficient code to do this job in VB?
View 4 Replies
Jan 18, 2011
my proble is the following: I have a class MyClass and another class Modifier, which has a method ModifyMyClass(ByRef mc as MyClass) that receives a MyClass instance as ByRef parameter to modify it. A smell of the code is:
[Code]...
View 4 Replies
Feb 15, 2011
I have a very simple class that is located within my App_Code folder in my VS2008 web application project. I am trying to instantiate an instance of this class from my code-behind file. Intellisense does not seem to be seeing my class and I am not sure why. I am using VB.NET which I am admittedly not that familiar with as compared to C#. Perhaps I am missing something. I would bet it has something to do with something I am missing in VB.NET.Here is my simple class (for testing):
[Code]...
View 2 Replies
Jun 12, 2011
I am loading several command buttons into it (one in each grid box). I have the panel set to autoscroll. When TableLayoutPanel is set to AddColumns, all works well. However, I dont want horizontal scroll, I want vertical. When I set TableLayoutPanel to AddRows, a vertical scrollbar will not appear.
View 4 Replies
Jan 2, 2012
I recently found this code (provided for third party use on another VB site), however,ll of my attempts to insert it into a class library have failed.I open a new class library and past the code in, and immediately get several errors pertaining to how certain objects can't be found. I find it it is crucial to use this code, unless someone can suggest to me another example of existing code that will do the same thing: make a restricted textbox who imputs can be restricted, that can handle pasting, shortcuts, text property setting, and script-entered text.
Option Strict On
Imports System.ComponentModel
Public Class RestrictedTextBox
[code].....
View 9 Replies
Apr 4, 2012
i have one string
stringname= "-01-Ashokkumar";
I need to the answer only stringname = Ashokkumar
View 1 Replies
Dec 7, 2011
I have something like this below. The String coming in is "Hello My Name is John || John Smith"When i split, i see the full string coming in fine, i see My_Split(0) is set correctly, but i cant seem to get anything after the ||
My_User = ListBox1.Items(Counter).ToString()
My_Split = My_User.Split("||")
My_User = My_Split(0).Trim()
[code].....
View 3 Replies
Sep 18, 2011
I want to make a picture splitter, this means when i have a picture from 64x64 it should split is to 4 images of 32x32.
View 6 Replies
Dec 15, 2010
I am trying to split a long string based on an array of words. For Example:Words: trying, long, array Sentence: "I am trying to split a long string based on an array of words."Resulting string array:Multiple instances of the same word is likely, so having two instances of trying cause a split, or of array, will probably happen.
View 5 Replies
Aug 28, 2011
I'm new in WPF and C#. I know a lot of VB.NET and I'm used to the way when I call a form object like textboxes, etc. I'm calling it from another form. Now, I'm using WPF, I'm confused. Because I have a Main Window. And I want to add and item to a listbox in the Main Window from a Class. In VB.Net , its just like this.
[Code]...
View 2 Replies
Sep 6, 2011
I created a modal dialog as a WPF window that changes some settings in the main window application. How can I refer to a member of the main window?
View 2 Replies
Jun 21, 2009
how can i Discover a Window Class Name ?
View 3 Replies
Mar 4, 2012
How do I split a sting and add each to a separate textbox? e.g:
Dim strLL As String = "123.123, 456.456"
Dim strL0 As String() = strLL.Split(CChar(", "))
For j As Integer = 0 To strL0.Length - 1
Debug.Print(j.ToString)
Next
This returns:
123.123
456.456
How do I add the 1st and 2nd values to separate textboxes?
View 4 Replies
Mar 25, 2011
i have a program where im trying to split a string from 1 text box and output the values in to 2 different text boxes .
my string username: password which reside in txt1.text
i want to split the string at ":" and have username appear in txt2.text and password appear in txt3.text i have this code but doesn't work for what i want to do.
Quote:
Dim text Array() As String = txt1.text.Split(":"c)
'ALPHA SORT THE ARRAY
Array.Sort(text Array)
[code]....
Also trying to find a way to rejoin the text back to the original string afterward in the username: password format
View 4 Replies
