I'm having a bit of trouble learning the uses of partial classes. I know they are used to split a class into several pieces for convenience but I don't understand how to put all of this into play. I'll show you what I mean here:
Lets say I have an interface named "ICar":
.NET
Public Interface ICar
Sub TurnOn()
[Code]....
OK, now that I have all of that, how do I put it to simple use in my partial class "OffRoader"? (You can add a "console.writeline" event to the methods if you want, in order to show me the uses of these partial classes.)
I have data in this format: [URL] which can be random in the amount of sections, etc.I want to split it so i can then use the data in my windows form, this is how to decode the data[URL] am struggling, ive got the file already split, as metarItems = Split(metarData, Environment.Newline) so metaritems contains the individual lines.The first 2 parts are always the same, ie EGBB 181320Z are always in same place?
I'm having some trouble compiling some VB code I wrote to split a string based on a set of predefined delimeters (comma, semicolon, colon, etc). I have successfully written some code that can be loaded inside a custom VB component (I place this code inside a VB.NET component in a plug-in called Grasshopper) and everything works fine. For instance, let's say my incoming string is "123,456". When I feed this string into the VB code I wrote, I get a new list where the first value is "123" and the second value is "456".However, I have been trying to compile this code into it's own class so I can load it inside Grasshopper separately from the standard VB component. When I try to compile this code, it isn't separating the string into a new list with two values. Instead, I get a message that says "System.String []". Do you guys see anything wrong in my compile code? You can find an screenshot image of my problem at the following link: click to see image This is the VB code for the compiled class:
I'm trying to use one project as a reference for writing another project, and I want to see as much code as I can from that project on another monitor. Since Code is only so wide (assuming you break-lines), I have a lot of wasted horizontal space. Is there any way in the IDE to do a vertical split of a class code window? I know you can do a horizontal split, but although that shows you two sections of code at once, it doesn't increase the amount of code you see, because it sacrifices one code's space for another.
I am working on a project and the code for FORMS1.vb has become quite large, 20K lines.How can I break this down into more managable pieces. I have tried Modules but I get multiple reference errorsd when I move like all of the reporting code to a module. The report code has nothing to do with the forms other than being able to call that code from an object on the form.
I am currently working on a program that edits txt files but it's for a game. There is a file that contains information that the client uses. This is what the file looks like:
|piece of code here|another piece|and another piece| |piece of code here|another piece|and another piece| |piece of code here|another piece|and another piece| |piece of code here|another piece|and another piece| |piece of code here|another piece|and another piece|
I want to make a program that reads this file and reads each piece of code separately and places them in different places like this:
Is it possible to add a property to the existing asp:BoundField control without creating a brand new instance to which I'd have to declare <tst:BoundField></tst:BoundField>?
As my company migrates towards the .NET framework from VB6, it looks like we are going in the direction of WPF (my boss is in love with the Office-style Ribbon control). I've been working to mock one of our VB6 applications in WPF and decided to experiment with MVVM at the same time. I'm being discouraged from using an existing MVVM framework, so I guess I need to write my own. The biggest concern right now seems to be a method for registering and managing all my views from a central spot - a manager class - but I'm not exactly sure how to implement this.
I wanted to know how to find the code for Chess Titans (Vista) I have the program that can open .dll's and .exe's and explore there structure, I just need to know how to get that code.
i am trying to implement a very simple program, that simply copies some text from one window in to an appropriate text box field in the other window. I need to copy and paste about 50 pieces of information from one window in to another.I suppose i can load the entire SOURCE window's text in to a text box control, and then i want to use sendkeys to populate appropriate fields in the other DESTINATION window that i want to populate with this information.My guess is that i will need some kind of windows api (Win XP) to get a handle on the appropriate text boxes in the destination window (or tab through it or something)
I am trying to split a long string based on an array of words. For Example:Words: trying, long, array Sentence: "I am trying to split a long string based on an array of words."Resulting string array:Multiple instances of the same word is likely, so having two instances of trying cause a split, or of array, will probably happen.
I seem to have a huge issue right now trying to grab different pieces of a string to place them in a different order in a list. Unfortunately i can't just find the placeholders for the strings and extract the data that way so i was using indexOf to find commas in the string provided. the problem i'm having is that i can assign the first comma and extract 0 - "," but i'm stuck on how to progress the indexof so it will move through the string submitting everything between the comma's.
Public Class Form1 Private Sub btnAccept_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAccept.Click
What i'm trying to do is retrieve 2-3 pieces of information from a parsed html file, then add the data into a listview in the corresponding columns i was initially going to do a function for each piece of information to retrieve but thought maybe i could do it all with 1 function instead.
I have been getting sometimes with SOME libraries (be it included in the framework or not).[code]I'd expect the func.Call() to return an exception if something is up, or do anything to error out, but here it just murders my method which returns instantly! The same stuff here is also in a loop, which doesn't get any more iterations, it just stops executing this function and continues running the program.
i can get this program to read the file but i now want to be able to call on the file from another form and use specific pieces of data for login verification and balance handling purposes.
[code..]
above is the contents of my txtfile but how do i reference anything in it? [code...]
I am trying to come up with a way to store 3 pieces of information for each employee in the company on a daily basis. So for instance
Day 1: Joe, 8, 80 Day 2: Sam, 10, 90 Day 3: Bill, 5, 40 Day 4: Bob, 8, 40 Day 5: Sue, 2, 50
most of the applications that I build are Create, Read, Update and Delete type applications that don't really need arrays so I have almost no experience with either.
VB ' Dim iDays As Integer = NumberDaysPerMonth(Date.Now) Dim DayNumber(iDays) As Integer
I would like to create a split container with a three way split. The first split is a vertical split. The second is creating a horizontal split within panel2 of the first split container. panel1 will hold a treeview control the other two panels will hold listview controls
I think this question has been asked already in a couple different ways and I've reviewed those posts and I've tried to do what was suggested but it doesn't seem to work for me. I've tried to place a second split container inside panel2 of the first split containter. This gave me what appeared to be a three way vertical split.
I have just started with vb and would like to know if there is a way to input several boxes of data on one form and display individual pieces of that data on several other forms at timed events in the future?
I'm trying to split a Yahoo historical stock price csv file, downloaded into a string, by what looks like a space character. I want a new row for each split. The split function works for other characters I see in the string. I suspect the characters may be a non breaking space character but I've been unable to split on them. This is the test csv file that is downloaded into the string: [URL] I'm trying to split the string like this:
If Class X is within the scope of Class Y, is X a subclass of Y?If Class A is a sub Class of B, then is Class B considered a super class of A?if Class C inherits Class D is Class D a superclass or parent of Class C?if Class E extends Class F then we can consider Class E a child of F?if Class G inherits Class H and is within the scope of Class I then who is the parent of Class G? Classes that inherits Class J and classes that are within Class J are all sub classes of Class J?
I have put this code in the global form Inherits System.Windows.Forms.Form. And then in the form that will inherit this from the global Inherits MenuStrip. "MenuStrip" is what the global form is called. But keep getting this error: Error1Base class 'MenuStrip' specified for class 'Lesson2' cannot be different from the base class 'System.Windows.Forms.Form' of one of its other partial types.
It is in the file ClientProfile I have placed in both App_Code and also App_Code/Models
In my code behind I have the following
[CODE]...
The last word, "ClientProfile" has the scary squiggly red line below it. It is not recognizing my class.Even the Intellisense is not picking up te class. Do I have to register the class file in any way?
Dim a as Type=GetType(className) would gimme the type. But I have only the name of the class as string. I want something like GetType("class1") which would return the type.
