do you know when you have two radio buttons? How do you make something, e.g an application form, appear below? For example if you have two radiobuttons, one labelled "single application" the other "joint application". If you click "single application", how do you get form to appear below?
View 5 RepliesThis is the strangest thing, I can not figure out why this is happening. When I delete a radio button from my form which is used to filter data in a database Form_Load stops working.My project consists of a database and a web browser. The database has a search filter options.[code]For some reason it didnt load my settings on start up. I made a button which displayed True/False in a text box to check if it was saved in my settings, it was, it just didnt want to load. So I deleted it and everything broke! Nothing in the code is referenced to the RadioButton or its code.
Have I done something wrong or is VB just messing with me? There is obviously a bunch of more code, I just posted what I think is relevant to the issue. If you feel something is missing, tell me and Ill post it. ied to change the RadioButton with a CheckBox, and I changed the code from "Me.ExampleTableAdapter.FilterHide..." to "Me.Example TableAdapter. Fill...", which is the same as in Form_Load. It works if it starts checked. If I remove this code or delete the CheckBox nothing works even though the same code is in Form_Load. If I start off with the CheckBox in an Unchecked state nothing loads, if I check it everything except the Browser works for some reason.
I am working on a project that has a groupbox with 4 radiobuttons in it. Since I have it in a groupbox, instead of doing an if statement for each radiobutton, can I do something else that will give me the value of that radiobutton so I can insert it into an sqlcommand line?This form has three groupboxes. the other two groupboxes are just textboxes so I was able to get the value for that and do an insert into statement to put the values in my database.How can I do the same with a groupbox that has these 4
View 5 RepliesHow can I do once I click on "textbox.text" This will select on RadioButton?
View 8 RepliesI would like to insert Radiobutton text value to my SQL database. I'm using Radiobutton for gender selection. I tried the code femaleRB.checked but it return a true value on my database. I want the text "Female" shown on my DB.
View 9 RepliesI need this code urgently try to sort out my problem and please explain the code with proper way.
View 1 RepliesIn a asp.net mvc form, im using a radiobutton set, to set a property. [code] I need the CType or i get an overload error.This case seems like the most commom use of radiobutton when working with a Model property.Of course i could create a partial view or a control, but apart from that, is there a cleaner code to accomplish this?
View 1 RepliesCode:
Public Class Form1
Dim dblPrice As Double = 0
Dim dblTotal As Double = 0
[code]...
I'm trying to get a counter going for radiobutton 3 which will allow the user to add an extra child or adult for a set price any one know how I can do this.
I have problem, that I have a lot of code, and I want to try to make less as much code. I have 30 RadioButtons and is even possible tu use something like that
If CheckedRadioButton.Checked = True Then
When user click on any of RadioButtons, then it can write number of RadioButton in settings.
The code below obviously works, but there must be a more elegant For Next code? I have 20 Radiobuttons and the user fills a textbox. I can't work out how to rename Button1 to Button2 in a loop.
[Code]...
I want to change the CssClass for the RadioButtonList while populating the theRadioButtonList. I don't know how to access the radio button while binding the list. do I need to use DataBind or DataBounding event ? and how ?
View 1 RepliesProbably bad code but I'm wondering why I'm getting these errors for the code below?
Value of type 'System.EventArgs' cannot be converted to 'System.Drawing.Image'.
Syntax error.
Private Sub rdbtnVisa_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rdbtnVisa.CheckedChanged
If rdbtnVisa.Checked Then
pBoxVisa.Image = E:VBClassProjectProjectProjectinDebugVisa.jpg
End If
I've underlined an marked in red the characters that are spitting the error.
How to click the WebBrowser1 radiobutton??
Web code...
<tr><td width="100%"><table width="100%" border="0" cellspacing="0" cellpadding="2"><tr><td width="1%"><td>1.Let's go to Choice ： </td></tr><tr><td width="1%"><td><input type="radio" name="q1" value="A">A.Apple。 </td></tr>
this is my code in vb.net behind where i am creating the radiobutton -
TD = New HtmlTableCell
Dim rdb As New RadioButton()
rdb.ID = "rdb_ads_" & DR("ID")
TD.Controls.Add(rdb)
TR.Cells.Add(TD)
It displays the radiobutton, but doesnt select single. i can select all at one time. how do i make it to select only 1 at a time.
i already write below coding on my code site.. If rdb1.Checked = TrueThen MsgBox("You will depart in the morning at 10.00am") ElseIf rdb2.Checked = TrueThen MsgBox("You will depart o the evening at 04.00pm") EndIf when user choose..ex:destination..user still can select both radiobutton.. i want the radiobutton can be select one only,
View 2 RepliesI need the user to choose one on a group of RadioButton controls. The problem is that on form load, one RadioButton is automatically selected. I does not want one selected, unless the user checks it, but cannot find how to disable automatic selection.
View 2 RepliesIs it possible to have radio buttion 1 control this code and have radio button 2 control the same code with different sizes? If this can be done it will get me buy until I learn a better way. It is a small envelope app, someday I will add a database to it too hold all my address. Right now I only use a couple different sizes.
View 26 RepliesMaybe a windows form doesn't usually hold that many radio buttons. You only need so many;say four different sizes you would need a radio button for each one. In my case I have two GroupBox Containers each with 3 or 4 RadioButtons. If I have a reset button (giving the user a method of starting over) that clears any selections the user made, I have 7 lines to 'uncheck' each item individually.
Like this;
FirstRadioButton.Checked = False
SecondRadioButton.Checked = False
[code].....
I set a radiobutton.value to true. when I go to save and perform bindingsource.endedit. radiobutton.value is then nothing. any ideas as to what could cause this?
View 1 Repliesradiobutton.value is nothing on bindingsource.endedit
View 11 RepliesI wont to built a web player i broke down the project in pieces so i can be more efficient.Project info:The user has 4 default station (4 radiobutton).From menuStrip can add a station.This is a run time control that add a new radiobutton on FlowLayoutPanel.It has a text like the user wont it.The user can add as many station as he like.The problem:I can be able to insert in radiobutton the proper text .How i can make after user check the radiobutton and push button Listen to load the url value and play.(i know after that RadioPlayer.URL = xxxx ).I be aware for clik event addressOf and for a dynamical used array but nothing help me out to take the url value and connect to the radiobutton.Target:After user add a station ,he can check the station and after push the Listen! button can listen .Conclusion This is only the part of the project. Runtime control item and handles the value.
Form1
Public Class Form1
Private Sub AddToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles AddToolStripMenuItem.Click
[code].....
I have two radiobuttons and i want to save the result of the one that has been chosen into the databasehow do i go about this.as for now i have been using an if statement as shown below but i know that there is a more educated way to go about it.
If rdbCustomSW.Checked = True Then
txtType.Text = "Custom"
End If
[code].....
When filling controls on a form, I want to check the DB value of a Field, if it Yes one RB is set to checked, if it is No the other one is set. I know I have doen this before but can't remeber how or find a sample.
vb.net
If Not dsSearch.Tables(0).Rows(dbCursor).Item(12) Is DBNull.Value Then
If dsSearch.Tables(0).Rows(dbCursor).Item(12) Is "Yes" Then
Me.rbtActive.Checked = CBool(CheckState.Checked)
[code]....
Im basicly making a "Settings" form and I want it to be able to check more then one radio button, but only 1 per "line" (One Per Setting)
View 4 RepliesI'm wondering if there's an easier way to do what I'm trying to do, because right now it seems like I have to program all the functionality manually.Here's my situation. I have a UserControl with a single Radiobutton on it.When the radiobutton is clicked, it marks the UserControl as "checked" and does some nice OnPa
View 9 RepliesI have group of radio buttons, each group ranges from 5 - 27 radiobuttons. And if any radio button in a group is checked I store 1 in db else I store 0. Now I'm checking each radiobutton using if loop to see if they are checked and set database value. I'm also trying to use the code below. Is there a good/better approach to check if they are checked or not?
Current code:
'rname is radiobutton prefix for a given group
'cnt is number of radiobuttons in the group
Private Function RadioIsChecked(ByVal rname As String, ByVal cnt As Integer) As Integer[code]....
Note: I cannot use radio button list. I know this can be achieved easily using this but i want to get solution for radiobutton
I have say 4 asp.net radiobuttons which are grouped, I want to find out which one is checked.
What seems natural to do is:
Select Case RadioButton.Checked = True
Case myRadioButton1
Case myRadioButton2
Case myRadioButton3
Case Else
End Select
I just get a 'reference to a non-shared member reference' error. It's a shame because it seems such a clean way to do this test.. Is it possible??
I have radio buttons set up with different prices behind them.
When I change the radio button, the label clears but continues to add on the last price from before, therefore giving the wrong "subtotal" as such.
I have tried Subtotal.Text = "" and Subtotal.Text = String.Empty but these only clear the label, not the number behind it.
How about this then a scrolling text RadioButton!!?? >>1) Go to the PROJECT menu and select ADD CLASS.2) PASTE this code
[Code]...
Anyone knows how to randomize the radio button text value? with every click of the button?
ex.
radiobutton1.text="circle"
radiobutton2.text="triangle"
[code].....