I'm using this code to remove controls from a panel.vb.net For Each c As Control In Me.pnlDevices.Controls Me.pnlDevices.Controls.Remove(c)Next
but somehow it doesn't remove all the controls at once, I have to run the code 3 times to remove them all(there is about 20 to 30 of them, mainly labels I don't know if it matters, but the controls where added dynamically at startup...
I'm making quite the complex program, and while I try to figure out some more advanced methods that work better for what I'm trying to do, I'd like to learn how to do this (which is a bit of a roundabout method to what I've been trying). I'm wondering, how can I programatically create and remove objects? For example, I have webbrowser1. I want to remove it and create another webbrowser that I will also name webbrowser1. (therefore, the instance of the original must be removed)
View 5 RepliesWhat's wrong with the following code? I'm trying to remove some radio buttons that were created dynamically but the controls' names are not being picked up by this code (only the name of the type of control).
[Code]...
I have a problem with a bit of code that is supposed to delete every controls on a form appart from the 2 first controls
vb2010
Private Sub ClearCheck(ByRef Container As Control)
Dim ctl As Control
Dim Boxtype As Control
Dim i As UShort = 0
[Code]...
The behavior is strange, I can't find any logic to it, it will sometime delete a part of the objects, other times it will delete other part of the objects. If I run it more than once, I can achieve the wanted result and remove all controls except the 2 I want to keep. It's as if it was checking 1 out of 2 controls.
To give you a better idea I have a combobox on the form and depending on choice it adds appropriate controls (not show/visible true) and add a second combobox to refine the search. If I change the value in the first combobox I want to remove the added controls from the previous combobox.SelectedIndexChanged as well as any control created by the following combobox from the form.
If need be I'll post the code that creates those new controls, but it's quite long so I didn't include it in this post
I have added controls to the form using a control array.. However, when I re-run it they stay and more appear. How do I get rid of the first set?
View 10 RepliesHow can all Child controls be removed at ones, instead of removing them one by one with this code below?
FrontPictureBox.Controls.Remove(Titel_Label)
Hendri Bissolati noviceprogrammer@vodamail.co.za
im building an application using vb 2010 in which around 2000 labels are loaded on runtime. these labels are loaded and unloaded periodically.the unloading process of 2000 labels is very slow.guide to remove/unload 2000 lables faster.here is my code to unload labels.
For i As Integer = thisControl.Controls.Count - 1 To 0 Step -1
Dim LabelWhichShouldBeRemoved As Label = TryCast(thisControl.Controls(i), Label)
If LabelWhichShouldBeRemoved IsNot Nothing Then[code].....
I'm having problems removing dynamic controls.
Here is what I'm using:
CODE:
The first sub is for adding the (custom)control, the second sub is for removing the control.
The custom control is a picturebox with a checkbox in the upper-left hand corner, no big deal.
The problem is that when I click the delete command, it only deletes one ckPicture at a time, and allways the last one in the list. I'm also assuming it's doing the same thing in the list(of images). What should I do differently so that it will remove all controls that are checked?
I forgot to add the variables in my namespace.
CODE:
This is my first post here as I am in the process of writing my first vb program. I just recently learned VBA and prior to that I had no programming experience. I decided that my first attempt with VB would be to convert a program that I previously wrote in VBA. It runs in an excel workbook but it doesn't actually use any excel functions so I figured it would be acceptable to convert. I am having an issue with removing controls on a userform. A commandbutton adds a line of about 6 controls. The user can add as many lines as they need to input their data. One of the 6 controls is a delete button that deletes the line of controls next to it. I have created a collection named Cashflows that holds each line of controls and each line of controls is named with a number that indexes the name to the line that it appears on in the form. In VBA I use that number to delete the actual controls from the userform and reposition and rename the remaining lines of controls.
Private Sub Delete_Click()
Commandbutton3sub(CInt(Right(Delete.Name, Len(Delete.Name) - 6)))
End Sub
I Put together this bit of code. What the problem im having is Removing a Label after i place the code its in a select end slecte code . The Problem is in red.
the code
Dim Animals As String = (TextBox1.Text)
Select Case Animals
Case "Apples"
[Code].....
Everything works Accept the remove selection ... I think it has something to do with Dim LB As New Label() ... And ... Me.Controls.Remove(LB)
I have a lot of buttons on a form (144) that need to be removed. All their names begin with "R". So I used this piece of code.
Sub RemoveBookingButtons()
Dim cntrl As Control
[CODE]........................
However whenever I run this sub function, it deletes every other button starting with "R". better code or point out if the flaw is in that piece of code or it is hidden somewhere else in my program?
I am working with my project and I have difficulties in my program. This is the set-up: I put a textbox1 and a button1 in the form, textbox1 is for the property of the label text to be add
when I click the button1 I have another textbox, label and a button,I want the added button to remove the textbox, label and if possible the button itself, is there a way to delete a control by the added button?
I drew a Group Box around a bunch of controls cause I wanted to the Box, meanwhile all the controls are glued to the Group Box. How can I remove the Group Box without removing the Controls?
View 1 RepliesI'm reading a csv and load it to a DataGrid using this:[code]Each item on record is between two commas, I tried a lot of things to remove them but I failes, wich is the best method?
View 4 Repliesin my application there's Textbox1.text, Textbox2.text, Textbox3.text and Button1.
my code is:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
TextBox3.Text = Val(TextBox1.Text) / Val(TextBox2.Text)
End Sub
End Class
I have a textbox multiline and i want to remove each first element of the textbox.
[Code]...
How i can remove the first element of each line of the textbox ?
Public Structure ReportOrderType
Public ReportName As String
Public ReportDate As Date
Public SaveFile As String
End Structure
[Code] ....
Basically, I have a list of reports. In one place they get ordered, and later on the program looks to see which ones have come back -- see if the .SaveFile exists on disk. If it exists, then that report gets processed, and then I want to remove that item from the list of reports-on-order. However, I get an error message back that by doing the .Remove(R), I've changed the list itself & things won't go well with the rest of the For Each loop, which makes some sense.
When I get to this routine, the list of ordered reports will be something from a couple of dozen or less, and some number of them (perhaps zero, perhaps all, probably a few) will exist & be processed & then should be removed from the list. How should I go about accomplishing this? This is my first time working with List(of t) as a Visual Basic tool; everything I've used in the past has been with arrays, and I can do this there.
I need to parse an alphanumeric string leaving the characters "0-9", ".", "/" and space & remove everything else. I use "[^0-9./ ]" as my regex string and it works well. But now I have a couple other conditions that I dont know how to handle with my regex string. I actually only want to keep the "." character if it falls between two digit characters (ie. 3.5), otherwise remove it. And also I need to replace any "-" characters with a space if it falls between two digit characters (ie. 2-1), otherwise remove it.
View 1 Replies[URL] There's a RemoveEntry() function to remove a file, but I can't seem to find a function to remove a directory... Does DotNetZip support directory removal? If not, what are some other libraries I could try?
View 1 RepliesI have the following
Public itemArray As New List(Of ItemArrayStructure)
Public Structure ItemArrayStructure
Dim DisplayText As String
Dim Checked As Boolean
End Structure
If I know the DisplayText of an item in this array, how can I remove it?
i want to remove all selecteditems i tried to use this loop but it didn't work
Dim a As String
For Each a In History_Textbox.SelectedItems
History_Textbox.Items.Remove(a)
Next
How do i do it because that just didn't do anything
I have a multiline textbox where I sometimes get the first and last line of data that is blank.
This is my code that populates the textbox:
txtOutput.Lines = lines.ToArray How can I remove these blank rows?
If I want to remove 2 characters, or a specific letter or character from a string in VB, how would I accomplish this?
A usual input would be
"63.0" in string format
and I want it to be
"63"
I have a file location as a string. How can i remove the path from the string and just use the file name? For example:c:filesfile.zip - is the stringhow can i just make it so it's file.zip?keep in mind that the location is found by using anpenfiledialog(), so it needs to be able to remove the location wherever the file is.
View 6 RepliesI have an array with a possible of 25 numbers that can be entered into it, how to take out the unnecessary zero's for the valueas i have not entered into my array.
Public Class Form1
Dim mintArray() As Integer 'Declares Array without giving it a size
Dim Array(24) As Integer
[Code].....
I get an error at the highlighted part : " InvalidCastException was unhandled, Conversion from string "" to type 'integer' is not valid."
I have written this code to send a notification to a group of people.... what i want to do is set up a draft, then send a email to each person on the list without a cc: or Bcc:when i run this code it takes the draft out of the draft folder after the first email is sent.how can i stop it from removing the email? [code]
View 2 RepliesBasically I need to remove Listbox1 items that are less then average, but its giving me:
System.ArgumentOutOfRangeException was unhandled
Message=InvalidArgument=Value of '9' is not valid for 'index'. [Code]
I have been using the following code to remove text from strings so far;
String = Replace(String, "TextToChange", "")
However, I now would like to remove two words only when the occur consecutively for example, I would like to remove "Task 1", not all instances of the word "Task" and value "1".
I have a file that is constantly altered, and if an error happends, I want to have a backup. I was wondering if there's a way to make a script that will copy all the files in the selected folder, and post/overwrite them every 20 minutes in a back-up folder or something, and I say overwrite so it doesnt take up 298347234 gigs of data.
View 2 RepliesFor Each s As String In list
If s.Contains("Hello") Then
list.Remove(s) 'ERROR Collection was modified; enumeration operation may not execute.
End If
Next
Why do i get that error?