I am wondering if it is possible to run an application from a domain account that has restrictions on running .exe files by coding in the local administrator details (username / password).
View 3 RepliesI would like to know if I need to get permission from Microsoft to develop applications for Small local firms using Visual Studio 2010.
View 6 Repliesi have a script with a login form that creates a folder per user with username.txt, password.txt, firstname.txt, and lastname.txt. - auto creates when creating new user.after i log in and change form i want an label showing the first and last name of the person logged in,how am i supposed to do that? is there any way to make like an "admin" form where new account applies will pop-up when "admin" log in and then either accept or reject new users?
View 8 RepliesI must give my application local admin privacy so my application can acces and chnge (in this case uninstall) ,independently user's access level , I've local admin's pass .
Briefly : I must run as local admin .
I want to change or reset the local admin password of the opreataing system(win xp) using vb.netIs it possible?
View 10 RepliesI recently just started working somewhere which will involve me coding VB in MS Visual Studio .NET 2003. I've been trying to refresh myself in VB by reading things online, but I just discovered an error while trying to run some practice programs (attached as error.png). Basically it says that I need administrator access.I'm waiting on an IT guy to grant it to me, but in the meantime I'm trying to figure out if there's a way that I can test my code without being an administrator.
View 1 RepliesI just need to run a simple program that requires .NET 2.0 on a computer on which I only have restricted User rights..I have permission from my supervisor to do this but he would rather not call in the IT guy to install it.So is there any way I can run this program (i dont need to run it multiple times) on this computer?
View 1 RepliessI'm trying to pass some parameters to OpenSSH to create an SSH Tunnel, but I'm not exactly sure how to do it, because the OpenSSH is running via a script which makes it run a admin. So basically I need to integrate these parameters:
[Code]....
i have in my form a text box and 3 buttons one is for browsing the other is to execute what i browse and the other is to exit the program when there was a program set to run from my hard drive it was running smoothly with admin rights now that i have setup in order to run ffrom the text box value it will just run it will show the command line for a sec or two and it wont run the program
[Code]...
I need to run my program as admin because it accesses the registry on load. Well I wanted to implement a drag and drop feature but have come to find there is a access issue with running as admin and the dragenter event. Is there any known workarounds for this? I have searched all over the place.Just a side note I only need to get the file location from the item being dragged in...
View 3 RepliesIs there a way to, when a parent application is opened up, that at the click of a button, or anything of designated event, that this parent application can open a secondary one?
View 11 RepliesHow can I get all of the running applications? If I have to use Process.GetProcesses, then how can I determine which are applications (appear in the task bar)?
View 4 Repliesi am having trouble executing applications that havent got the prefix .exe here is the code tat i mostly found in the internet can someone help so it will be able to play with all applications tried to make it play with msi but it wont play.
[code]...
I'm going to design an Application (C# or VB.NET) which use .NET Framework to run for very long time. It may be restarted every year or even more...Is there anything (using special design patterns or so) which I must care about in designing "Long time running applications in .NET"?
View 3 RepliesAnybody have an idea to list running programs ; not all running background process. I tried following code, but which list all process names. eg: notepad.exe, vb6.exe, svhost.exe etc. but what i need is the running window based programs( with windows.)
1st method
Dim process As Object
For Each process In GetObject("winmgmts:").execquery("Select * from Win32_Process")
Debug.Print process.Caption
[code]....
I developed an application I need to run exclusivly under DOS mode (no Windows), when I wrote the app I created it as a CONSOLE application, when I run this EXE under the DOS mode it says it can't RUN in DOS mode? Is there ANYWAY I can make this work?
View 5 RepliesI have seen that unsigned .net applications will not run on most college networks and as part of a school applications i am trying to let these applications run on a protected network. The app is written in VB 2008 and is signed strongly.
View 1 RepliesI have created an application that will run several other Engineering applications from within it.
I have my main form which will have a button on it for each application that has to be run. All the other projects are complete and have their respective '.EXE' files, which I have added to the main project.
I have coded one of the buttons to start an application, this is as follows;
Private Sub btnCoordsCalc_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCoordsCalc.Click
Process.Start(My.Computer.FileSystem.CurrentDirectory & "Hole_Coordinates_Calculator.exe")
End Sub
This method works OK and does start the application. So my question is; Is this the correct way to do it, or should I import the whole project into my main project?
i am a casual user of visual basic express 2008 and use Vista Home Edition Ive been using it for a while now, with no problems at all. Recently i started to take a look a WPF in my apps, again no problems.(visual basic express ran fine, debugging ran fine & finished apps ran fine)
However for some reason (and all of a sudden) i keep getting errors and none of my apps will start up.
The errors are:vshost.exe has stopped working (I get this when visual basic express starts)PresentationFontCache.exe has stopped working (I get this when visual basic express starts a wpf app)
(Application Name) has stopped working (I get this when running finnished apps)I've tried all the usual methods (Reninstalled VBE & .Net3.5)I cant see why it has stopped working all of a sudden?
he lack of VB terminology in the following question - this is all fairly new to me. Anyway, on to my question.I have 2 seperate applications running and they both need to access the same array. Is it possible? If so, how?
View 2 RepliesI have created a main application form that has buttons that start up various other applications.
Following advice on here from a previous post, I have imported all the files of each separate application into the main application.
There will be times when the user wants to run more than one of these applications at the same time. I know you can just import the '.EXE' file of each app, and you can then run several at a time. But because I have all the files without the .EXE, you can only run one at a time, you have to close one app to start another.
My question is simply; Do I have to import the .EXE file of each app, or is there some code I could put in my main form that will allow me to run more than one app at a time? (the reason for having all the files of each app is so you can make any alterations without having to open each app separately).
The code below is a typical code for one of the applications start buttons, all the buttons codes are the same, apart from the app name, the buttons are imported, so not standard buttons.
Private Sub btnCoordsCalc_ClickButtonArea(ByVal Sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles btnCoordsCalc.ClickButtonArea
Dim frm As New frmHoleCoordinateCalculator
[Code]......
I'd like to ask assistance for the following scenarios below:
1. I want to check whether certain applications are already running or not.
2. The applications i need to check are the ff:
a. MS Word
b. MS Excel
c. Notepad
d. MS Project
e. MS Powerpoint
3. If any of these are running, the window title of that application will be filled-in in a listbox.
I have created a simple windows forms application. I would like to be able to connect to that running application and view certain properties from a seperate windows form application. In VB6 I would have run the first application and then called GetObject to connect to the instance. Does anybody know how I could do this in .Net. I'm guessing I'd have to use reflection to get a list of applications running and then somehow connect to them but I'm not sure how to do this?
View 5 RepliesI am running a client-server application and am having problems with privileges (I assume). The application is developed using 2005 Express. The Client is running Win XP Home whilst the server is running Win 2003. When the user on the client has Admin rights on the local machine, everything is OK; however when the user has only User rights, an error occurs: VB will not run.
View 14 RepliesI want to get the detail of all the applications running in windows like
Application name : Status : User : Resources Usage : etc....
also I want to get the detail of all the users logged in at a time
on XP Pro, IsUserRole(eUserType.Administrator) returns true, if the class is administrator, and false if it's limited...
On Vista, it returns true, if it's the first administrator account, and false for anything else... I created a second administrator account on Vista, and it shows in code as "Standard" (or limited) user, the same as if I made a "Managed Account" on Vista...
My
#Region " [IsUserRole] "
Public Enum eUserType
Administrator = 0
[Code].....
i would like to scan all the processes(aplications) running in a system before starting my program. and also need to close some programs before starting my program.how to read all the processes ruining in a system one by one.
View 1 RepliesEvery time I make a application and distribute it, Vista users always have to set it as "Run as Administrator" for it to work... Is there any way to make it to where they don't need to do this?
View 3 RepliesI'm designing a system, whereby am unable to use 2 different login authorities, which are Admin and Non-Admin. I am using VB.NET and Ms. Access and need help for the codes.I want something like, if i click on admin/non admin (with different passwords) a dialog box pops onto the screen and asks for the password. If the password is correct it should take me to the form i want. Something of this sort please.
View 9 RepliesI Need vb.net sample code to run SQL Server Report.
- Would be cool if you could provide:
-vb.net code
- sample showing use of parameters
- switching data sources
- setting credentials
- running a local report using a rdl file ie report file
- running a remote report using reporting services server