VS 2010 - TableLayoutPanel - Check At Least One Radio Button Has Been Selected During A Click Event
May 27, 2011
I'm curious if there is a "check all" kind of thing for a tablelayoutpanel? To explain, say I have TableLayoutPanel1 with 6 radio buttons and I'm doing an error check to make sure that at least one radio button has been selected during a click event. Do I have to do If / and with all 6 radio buttons? Or is there something like "If TableLayoutPanel1.checked(obviously not this) = false then".
View 5 Replies
ADVERTISEMENT
May 31, 2012
I have the following:
<asp:RadioButtonList ID="rbIsRep" runat="server" RepeatDirection="horizontal" >
<asp:ListItem Value="1" >Yes</asp:ListItem>
<asp:ListItem Value="0" >No</asp:ListItem>
[code].....
View 2 Replies
Jun 11, 2010
I have a windows form application built with Visual Studio 2008. When a use clicks a command button which does some action, I use SelectNextControl to automatically move to the next control in the tab order once the action is completed.
This seems to work very well, however, I have recently discovered that if the next control in the tab order is a radio button, the call to SelectNextControl does not simply make the radio button the active control... it also causes the click event to fire. When I use the tab key to move past the command button (rather than clicking on it which will result in a call to SelectNextControl), the radio button gets focus as expected and the click event is not raised (as expected). I don't know if this is a bug in selectnextcontrol or the radio button control.
Has anyone else seen/solved this problem? Another forum post discussed a problem where the radio button was automatically checked when a form was first displayed and the radio button was the first control on the form. Seems to be a very similar problem. That post was from 2008.
View 6 Replies
Jan 19, 2012
I have a gridview in wpf and have a two radio buttons and a button in template column. How do i access the status of radio buttons in the click event of the button?
<DataGrid>
<DataGrid.Columns>
<DataGridTextColumn Binding="{Binding TrackingID}" Header="TrackingID" Visibility="Hidden" Width="50" />
<DataGridTextColumn Binding="{Binding UserFullName}" Header="Name" Width="140" />
[code]....
View 3 Replies
Aug 2, 2011
I have two groups of RadioButtons, each group inside its own GroupBox. When a RadioButton from one group is selected, the handler passes the selected button - this is not a problem.
But I need to grab the value of the selected RadioButton from the other group as well - is there a simple way to do that without iterating through them all?
View 1 Replies
Feb 13, 2009
I have one radio button and one listbox .i want code for display listbox depends on the radio button check true and false.
View 3 Replies
Feb 10, 2011
Basically I want to change a text if certain radio button is selected
Private Sub Form2_Shown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shown
If RadioButton1.Checked = True Then
Label11.Text = ("Boca Juniors")
End If
End Sub
I'm pretty sure the Form2_Shown is not correct but I dont know what else to put.
View 17 Replies
Mar 31, 2012
<DllImport("user32.dll")> _ Private Shared Function SetForegroundWindow(ByVal hWnd As IntPtr) As <MarshalAs(UnmanagedType.Bool)> Boolean End Function
[Code]...
View 13 Replies
Oct 1, 2010
I want RANDOMLY click one of two radio buttons on a web page. Right now I only know how to click the last one... Also, the value of the radio controls changes every time. HTML Code of radio controls
HTML
<input type="radio" name="vote" value="ECA">Yes
<input type="radio" name="vote" value="ECB">No
[code]....
View 3 Replies
Oct 10, 2011
trying to write a simple form for calculating professor's salaries depending on their degree and position.my problem is that the when i select a check box, the value is not being updated until i select a different radio button. it probably doesn't make much sense here,
Public Class frmMain
Private Sub optLecturer_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optLecturer.CheckedChanged[code]....
the values being assigned to my salary label are correct, but are not being updated until i select a new radio button. im not entirely sure how to get around this so that the value is updated as soon as i select the check box.here's when the program looks like:
View 1 Replies
Apr 3, 2011
How to check all asp.net checkboxes on single asp.net button click event. If I have 45 checkboxes inside panel1 I want on button click event all the checkboxes will be checked and on another button click event all checkboxes will be unchecked... How to do it using jquery, javascript or vb.net ?
View 3 Replies
May 2, 2012
[code]......
View 7 Replies
May 14, 2011
my source code in design part is:
<asp:Panel ID="Panel1" runat="server" Style="display: none" CssClass="modalPopup">
<asp:Panel ID="Panel3" runat="server" Style="cursor: move;background-color:#DDDDDD;border:solid 1px Gray;color:Black">[code]......
Ok button click is not accessing click event.
View 1 Replies
Jun 8, 2012
I want when I click on a single cell of a TableLayoutPanel (containing a control), that cell need to have a color and when I click on another cell, the previous cell color removed and add to the cell clicked.I know it has something to do with the position of the mousepointer, but the only thing I found on google, was pre-defined cells and the than the color.
View 1 Replies
May 20, 2011
In my vb program, I have two forms that work together to allow you to define an almost arbitrary amount of designs. In the first form, there is a two-dimensional array, storing an integer (not important) and an ID class that I defined as a public inner class in another form. Clicking on the "Define ID" button in this form will take you to the next form, where you will define a new ID or edit an old one based off of an index in the array you selected or entered in the first form's combo box, using multiple fields in the second form to define its different aspects.
What I want to happen is the first form's code to be suspended as the user defines the ID in the second form, then they click on the Continue button on the second form. After a bit of error-checking, the form either is momentarily hidden (which is how I originally implemented it) or returns the edited ID object, but only if the error-checking does not indicate any input is incorrect.
Originally, I simply grabbed the ID by using newForm.curID and set that to its spot in the array, waiting for the user to finish by using newForm.showDialog(), but sometimes the program would return a null exception because I don't think I copy the IDs correctly.Also, though the errors show up for a small amount of time, the Continue button saves the ID regardless of its correctness. Is there a way to manipulate the showDialog to get a result response out of it?
Short version: I need to either return an object of an inner class in one form to an array in a calling form or wait for a form to finish and use the calling form to copy its object, then close the callee form.First Form's "Define" button method
Private Sub DesignButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DesignButton.Click
Me.totalCoilBox.Focus() 'calls validating method, makes textbox yellow if invalid'
If totalCoilBox.BackColor = Color.White Then
Dim newForm As New IVD_DesignData 'creates an object of ID called curID as well'
[code]....
View 1 Replies
Mar 23, 2010
Simple code, I have 3 radio buttons that change the color of the form. Thing is when I run it, my first radio button (red) is already selected. I know I can make a hidden button and focus it on that, but is there a way to just make it not have anything selected? I tried rdoRed.Checked = False Doesn't work.
[Code]...
View 5 Replies
Jan 6, 2009
If I have two radio buttons on the first form of the project, they are both uncheck by default. However, if I have two radio buttons on a form that I open with MyForm.ShowDialog(), the first radio button is checked! Is there a way to stop this?
View 4 Replies
Jun 12, 2009
How do i checked that within a GroupBox 1 radio button has been selected? I want to provide the user with a message box telling them they have not made a selection from one of the 12 radiobuttons within the group box?
View 3 Replies
May 1, 2010
If I wanted to hide an image when a radio button was checked, how would I go about doing that? Does anyone have any good resources to read?
View 4 Replies
Mar 25, 2010
I'm trying to sort records in the gridview right after a radio button is selected. My approach is with the dataview, but because the dataset variable doesn't survive a round trip to the server, I don't know how to make this happen.[code]
View 1 Replies
May 26, 2009
How can I make it so that when a radio button is selected, button1 is enabled?
View 3 Replies
Dec 27, 2011
Suppose I have 2 radio buttons r1 and r2, both the radio buttons ask for your gender, you can be a man or woman. So what I want: if user checks r1 but then realizes that she is a woman, she then wants to check r2 so the control on r2 gets checked while r1 gets unchecked.
<tr><td>
<asp:Label runat="server" text="Chooose Your Category" ID="lblcategory"></asp:Label>
</td><td>
<asp:RadioButton runat="server" Text="Male" ID="rbgold" />
</td><td>
<asp:RadioButton runat="server" Text="Female" ID="rbsilver" />
</td></tr>
What should I do next so as I can choose only one?
View 3 Replies
Mar 29, 2010
How do I make an if statement that would check if the user has selected an option from the select list named cboGrade and also to check if the user has selected a radio button from the group named gbCalcType? I have an action that is carried out when a button is clicked, but before that action is carried out, I need to check the above.
I have this so far:
If rbPlus.Checked Or rbMinus.Checked Or rbMultiply.Checked Or rbDivide.Checked Then
instructions are here
End If
This checks that one of the radio buttons are selected. How do i check that an option is selected from the option list? There are three options: 3rd, 4th, and 5th. And the text starts out saying Select One and it locks the control once they choose one.
View 1 Replies
Jan 8, 2010
I have a WinForms application (VS 2008, .NET 3.5) that has a form with two different group boxes, and inside of each group box are different sets of radio buttons. When I run the application, the first group box automatically has the first radio button in it already selected, and the second group box does not have a radio button selected by default.
I have looked through all the properties of the radio buttons and the group boxes, and cannot figure out what the difference is between the two.I would like both group boxes to have all radio buttons unselected when the form is first opened.Also, I looked through the Designer.vb file for the form, and could not find anything unusual going on in there either.
View 4 Replies
Jun 25, 2009
I have a group of three radio buttons. Depending on which radio button is selected, I want to disaply one of three controls - a textbox, a dropdown list, or a button. How do I display controls based on the result of a selected radio button?
View 1 Replies
Apr 12, 2012
I have a Radio Button List that lists different business categories. The last option is the Other category. When the user selects the Other category, I want to be able to enable a text box that the user can then enter further information to explain the Other selection.[code]...
View 2 Replies
Feb 18, 2011
I am using a GridView with its first column as a template field with radio buttons.
I need to make the first radio button in the first row of the grid remain default selected during page load / postback.
View 1 Replies
Feb 15, 2011
I'm a beginner so please take it easy on me. I was wondering what the code is for the text of ANY selected radio button to appear in the multiline textbox that is already set up. Is that at all possible? If so, can you do the same for check boxes?
View 1 Replies
Nov 14, 2009
i'm trying to design a program where I can take all the software that i have and just put it on an external Hard drive open this program at a customers house select what software I want to install and than let the install run through everything. I'm running into a problem with my winrar installation since I have a x86 installation and an x64 installation I want to be able to select the checkbox for winrar and than choose either the x86 or x64 and than it will install. I figured out how to set everything up it disables the two radio buttons until the checkbox is checked but I can't go through and uncheck the checkbox (say if I accidently checked it or something)[code]
View 2 Replies
Oct 20, 2010
User will use a button1.click to open a filedialog to locate the file they needed. after which, the name of the file will appear on a textbox. Button2 is an OK button to write the filename into a txt file. Button2.click will work with the 3 radio buttons - meaning when Radio Button 1 is true and Button2.click is clicked, the filename will be saved asFile1.txt.if Radio Button 2 is true and Button2.click is clicked, the filename will be saved as File2.txt. Likewise to Radio Button 3
View 1 Replies
