Basically I want to change a text if certain radio button is selected
Private Sub Form2_Shown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shown
If RadioButton1.Checked = True Then
Label11.Text = ("Boca Juniors")
End If
End Sub
I'm pretty sure the Form2_Shown is not correct but I dont know what else to put.
I have two groups of RadioButtons, each group inside its own GroupBox. When a RadioButton from one group is selected, the handler passes the selected button - this is not a problem.
But I need to grab the value of the selected RadioButton from the other group as well - is there a simple way to do that without iterating through them all?
I have a Radio Button List that lists different business categories. The last option is the Other category. When the user selects the Other category, I want to be able to enable a text box that the user can then enter further information to explain the Other selection.[code]...
View 2 RepliesI'm a beginner so please take it easy on me. I was wondering what the code is for the text of ANY selected radio button to appear in the multiline textbox that is already set up. Is that at all possible? If so, can you do the same for check boxes?
View 1 RepliesI'm curious if there is a "check all" kind of thing for a tablelayoutpanel? To explain, say I have TableLayoutPanel1 with 6 radio buttons and I'm doing an error check to make sure that at least one radio button has been selected during a click event. Do I have to do If / and with all 6 radio buttons? Or is there something like "If TableLayoutPanel1.checked(obviously not this) = false then".
View 5 RepliesI am trying to add text from a text box into a list box when the radio button unseperated list is selected. i can do this easily. howeve ri now wnat to put text into the list box from the text box when the sepereated by comma radio button is selected
[Code]...
i have problem that i know once someone answers, i will kick myself, but here goes. i need to move the text next to the radio button to the left of the radio button, that part is easy just make sure the the "right to left" is maked yes, got it. but, the problem is i am making a seating chart and the seats are labeled 10-a, 10-b etc.... when the right to left is set to yes my text reverses and becomes a-10 and i can't seem to figure out what is set in the properties the is causing the alpha to be placed before the numeric.
View 2 RepliesSimple code, I have 3 radio buttons that change the color of the form. Thing is when I run it, my first radio button (red) is already selected. I know I can make a hidden button and focus it on that, but is there a way to just make it not have anything selected? I tried rdoRed.Checked = False Doesn't work.
[Code]...
If I have two radio buttons on the first form of the project, they are both uncheck by default. However, if I have two radio buttons on a form that I open with MyForm.ShowDialog(), the first radio button is checked! Is there a way to stop this?
View 4 RepliesHow do i checked that within a GroupBox 1 radio button has been selected? I want to provide the user with a message box telling them they have not made a selection from one of the 12 radiobuttons within the group box?
View 3 RepliesIf I wanted to hide an image when a radio button was checked, how would I go about doing that? Does anyone have any good resources to read?
View 4 RepliesI'm trying to sort records in the gridview right after a radio button is selected. My approach is with the dataview, but because the dataset variable doesn't survive a round trip to the server, I don't know how to make this happen.[code]
View 1 RepliesHow can I make it so that when a radio button is selected, button1 is enabled?
View 3 RepliesI have the following:
<asp:RadioButtonList ID="rbIsRep" runat="server" RepeatDirection="horizontal" >
<asp:ListItem Value="1" >Yes</asp:ListItem>
<asp:ListItem Value="0" >No</asp:ListItem>
[code].....
How do I make an if statement that would check if the user has selected an option from the select list named cboGrade and also to check if the user has selected a radio button from the group named gbCalcType? I have an action that is carried out when a button is clicked, but before that action is carried out, I need to check the above.
I have this so far:
If rbPlus.Checked Or rbMinus.Checked Or rbMultiply.Checked Or rbDivide.Checked Then
instructions are here
End If
This checks that one of the radio buttons are selected. How do i check that an option is selected from the option list? There are three options: 3rd, 4th, and 5th. And the text starts out saying Select One and it locks the control once they choose one.
I have a WinForms application (VS 2008, .NET 3.5) that has a form with two different group boxes, and inside of each group box are different sets of radio buttons. When I run the application, the first group box automatically has the first radio button in it already selected, and the second group box does not have a radio button selected by default.
I have looked through all the properties of the radio buttons and the group boxes, and cannot figure out what the difference is between the two.I would like both group boxes to have all radio buttons unselected when the form is first opened.Also, I looked through the Designer.vb file for the form, and could not find anything unusual going on in there either.
I have a group of three radio buttons. Depending on which radio button is selected, I want to disaply one of three controls - a textbox, a dropdown list, or a button. How do I display controls based on the result of a selected radio button?
View 1 RepliesI am using a GridView with its first column as a template field with radio buttons.
I need to make the first radio button in the first row of the grid remain default selected during page load / postback.
i'm trying to design a program where I can take all the software that i have and just put it on an external Hard drive open this program at a customers house select what software I want to install and than let the install run through everything. I'm running into a problem with my winrar installation since I have a x86 installation and an x64 installation I want to be able to select the checkbox for winrar and than choose either the x86 or x64 and than it will install. I figured out how to set everything up it disables the two radio buttons until the checkbox is checked but I can't go through and uncheck the checkbox (say if I accidently checked it or something)[code]
View 2 RepliesI'm new to VB.NET BTW. I designed a form and radio buttons and a submit button with a picture box ! Every radio button selected will display the image related to it in the picture box !
So, we have
O smile
O sad
O mad
O happy
O ...etc
When pressing the submit, the selected radio button will display a face of the mood !
Here is my code.
If RadBtnSmile.Checked Then
PicBxMood.load("smile.gif")
End If
If RadBtnSad.Checked Then
PicBxMood.load("sad.gif")
[Code] .....
i want to display a certain section of my form based on the number selected by radio button.( scale 1 to 5) by default 1 is clicked . if they click 5 then the same portion will be repeated 5 times .i have the database table structure to support this . but how to code the radio button to do the same .
View 8 RepliesI am having 3 radio buttons and a button The codes should be added to the button_click event, when ever the radio button is selected and the button is click then, The codes should determine which button is selected and assign it to a variable. Create a two parallel 1-dim arrays and populate it with the data below:
[Code]...
i have line like this 1.0 30 Blue (2 17.00 54.0) [2 16.03 52.0] 55611 30275 58571 23514 so i want to check after the Value Blue is that "(" or "[" in side my radio button checked change event.
in RadioButton1_CheckedChanged if the value is "( " the message box should come out and say "The file is already in PPin to Probe pattern" else if the value is "[" then there will be nothing to display.
this is my code Private Sub RadioButton1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RadioButton1.CheckedChanged Dim FileContents() As String = IO.File.ReadAllLines("C:\match1.txt")
[Code]...
I have one radio button and one listbox .i want code for display listbox depends on the radio button check true and false.
View 3 RepliesI am trying to update the values in my listbox as the user changes radio buttons rdMachineHome or rdIncremental. Are there any shortcuts or do I need to write everything over as an option?
Private Sub rdLength_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles rdLength.CheckedChanged
Dim Length As Decimal
[code].....
I've got 2 radio buttons on a form and am trying to allow a user to change the color of the form based on which radio button is selected. I've used select case in a separate procedure to do this because ultimately I'd like to have about 1/2 dozen or so color options to choose from.
The color changes when the first radio button is selected (pink or green, doesn't matter), but when I try and select a 2nd option, the program crashes (VB 2010 Beta).
My code so far is:
Public Class Form1
Private Sub SetColourScheme(ByVal colour As String)
Select Case colour
[Code]....
I get a 'StackOverflow' error, but I don't really know what this means. NB: Adding 'Return' keyword made no difference to the outcome - same error.
I have two radio buttons. I fhte user swtich between radio buttons, I need to popup warning message and if user confirm, then only I need to swtich to next radio button. Otherwise I shouldnt switch. I am using CheckedChanged event. As by the time I popup warning message, control is already switched. I tried adding and removing event handler.
[Code]...
i am still beginner in coding, i am using vb.net 2005 and access. in my form i am having a radio buttons called DEPARTMENT: english
[Code]...
How do I change the color of a small circle (dot) contained within the radio button to be red in Winform Application use VB.NET or C#?
[Code]...
I need to click a radio button for Metric and have "mm" appear on my form beside a box where the user will enter numbers. I have 3 radio buttons, American "in", Metric "mm" and Decimal "dec". I want the "in" or "mm" or "dec" to appear as text on the form beside the boxes where the user will put in the numbers.
View 1 Replies