VS 2010 Treatment Of Commas With INSERT / UPDATE To SQL
Jan 16, 2012
In SQL Server, you have to put single quotes around strings.But, when trying to run a SQL command in VB.NET I get some weird behavior.If you do an INSERT with a parameterized String value that has a comma in it, it works fine.However, if running an UPDATE command with parameterized String values, it says "Incorrect syntax near ','.I'm lost as to why INSERT can accept commas without single quotes and UPDATE will not accept commas with, or without single quotes.
I have a string that looks like this: This Original Product comes in a black colour and first thing I need to do is to remove the words with 3 letters or less and after insert a comma after each word. (Original, Product, Comes, Black,.....).
I'm trying to automatically insert commas after ever email in textbox1.text after the user imports a list of emails.Something like ..I want this to automatically occur after the user either drags n drops the emails into the textbox or copy n paste the emails into the textbox so that the user doesn't have to manually insert commas.
I'm trying to insert a couple of fields into a csv config file and then update all other rows in the file at the same index by copying the previous 2 entries. I'm reading through each row and converting the row into a list(of String) because it seems to be the most flexible way. Ine initial insert works fine, but the code below doesn't. The actual insert code is:
[Code]...
pcIndex is the list index value from elsewhere in the code at the insertion of the 1st of a pair of values into one row. I need to update that index point and pcIndex +1 in all other rows. However it's not doing anything. Tried using lstSteps.Insert, InsertRange, etc. Am I using this right? Is there a better way? It seems to be over-writing the entry rather than inserting a new column and moving the others up, so it appears the list capacity value isn't updating - so I'm left with the initial row with 4 more entries than the others sticking out of the file.
I'm reading a csv and load it to a DataGrid using this:[code]Each item on record is between two commas, I tried a lot of things to remove them but I failes, wich is the best method?
I have a gridview that is set to a sql datasource, it is generating the columns automatically. If I add a column to the table it is referencing, it will draw that column and display it, but it does not update the insert/update commands to include the new column. Is there any way have it rebuild those commands automatically?
I have a gridview in which when I click edit, update, and cancel button comes. I have a variable named status. If status=false then update should change to insert and if status=true then update should be update itself.
I am trying to re write a VB6 program using MS Access, many years ago, using VB 2010 express and SQL server 2008 R2 Express. I have a database with several tables, which I created using the designer. I am able to connect to the database and select data and display it in textboxes etc in vb code. What I have not been able to in code is to INSERT rows DELETE rows or UPDATE any data in the tables. I can do any of these operations using the Query Designer, but I want to do it in code. I can post some code if necessiary, but I thought it might just be some property that I had not set in the designer.
i have a query that when i updating my database it doesnot take *,&,-,#,@ all these,but when add a new database its taking all above i have fields of roll#,Sname,Age and address?
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click Dim conn As ADODB.Connection conn = New ADODB.Connection[code].....
I have a problem with this code.It loops all records in tables SAP_CC and ORCL_CC and matches all records where amounts are equal in both tables. The problem arises when I need to update the tables.I need to update a column on tables SAP_CC and ORCL_CC, setting the records as matched and also to create new records on the CC_RECONCILED table.
In the If ¦ End If the line .Open("CC_RECONCILED") throws the COM Exception:Operation is not allowed when the object is open. I cannot close rsl¦Is there a way of achieving my goal?
I've got results in a loop format from a XML file, I want to either insert them into my SQL database or update them if they are already there. My question is more around lodgic, do I have to
1. Get each item. 2. Do a search for it and see if it's in there. 3. If not add 4. If so update
Or is there a quicker way because with 200 records at a time, search then update/insert will slow down the process.
I've only been doing this a few weeks but been struggling with getting some simple commands working.I'm trying to get an insert into statement working, it works fine with a table in access 2007 that is text fields, however it wont work once I use a number field. Here is my code which doesn't work.
Private Sub btnInsert_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnInsert.Click Dim Sql As String = "Insert into staff(Firstname, Surname, Zone, Department) VALUES ('" &
I'm trying to get an insert into statement working, it works fine with a table in access 2007 that is text fields, however it wont work once I use a number field. Here is my code which doesn't work.
Private Sub btnInsert_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnInsert.Click Dim Sql As String = "Insert into staff(Firstname, Surname, Zone, Department) VALUES ('" & txtFirstname.Text & "','" & txtSurname.Text & "'," & txtZone.Text & ",'" & txtDepartment.Text & "')"
I need some help in using a stored procedure in my case below: I have a table with a single XML column which takes in fields VoucherCode and Quantity, the data in SQL xml column looks like this:
The below method will call my stored procedure to check if a particular voucher exist based on my voucher code and then either add a new row or update an existing voucher in my gridview:
Protected Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click Dim dbCommand As DbCommand = Nothing
I have an interesting problem. I need to write a program that checks to see if data has been inserted or updated into a Microsoft access database . The program needs to be compatible with both types of access database, so using triggers is not possible as it wont work in access etc
This is related to "Next form won't display" topic. What I want is instead of calling other form I'll just want to combine the two functions into one button.Condition is: If database is empty then insert function execute but if database is not empty then update data. I have codes below but it gave me error saying "The connection was not closed. The connection's current state is open."
I am not sure if I can do update, delete and insert in one form. The problem is that in this one form I have 3 textbox and 1 combobox which the user have to enter each column and click on the submit button which is for insert. So how can I do this with delete and update.
I was creating a program that will add the value of the first 2 columns in datagridview when you typed it in then the answer will be displayed in the third column... I want to auto update the third column that if I delete the value of one of first two columns the third column will be affected. Is it possible to update the value of a cell if it already has a value?
We are Developing A sample Money Management Software For this i want to Develop SMS Alert while inserting Income And Expenditures....For Evert Inert Record I want to Get the SMS Alert is it Possible to Implement this Concept...
i am using MsAccess as database.insert/edit/delete commands are working perfectly in my code. the problem is that if i insert a record it is definitly inserted in table in MsAccess but that cannot be seen on runtime. To see that inserted record i have to close MsAccess Table to verify that the record is inserted there. And also I have to stop debugging and then restart debug to see that the record is being displayed in Datagridview. How i can changes in records can be seen on runtime in DatagridView as well as in the MsAccess table on runtime.
i'm querying 2 tables from an access 2007 database + i've worked out the SELECT statement which works ok:
vb "SELECT a.id, a.number, a.subjectName, a.years, a.birthYear, b.note FROM Table1 AS a INNER JOIN Table2 AS b ON a.id = b.id"
now i need the insert, update, delete commands. i'm using parameters:here are my insert, update, delete commands for a single table. how should i modify them to work with the 2 tables as shown in the SELECT statement?
vb "INSERT INTO Table1 VALUES(@id, @number, @subjectName, @years, @birthYear)" vb "UPDATE Table1 SET id = @id, [number] = @number, subjectName = @subjectName, years = @years, " & _
I want to UPDATE query instead INSERT INTO using this code?
Dim cmd As New OleDbCommand("INSERT INTO tblPurchase_Order ([Order_Id],[Supplier_Id],[Address],[Project_Id],[dtpDate],[Material_Id],[Material_Name],[Unit],[Quantity],[Unit_Price],[Amount]) VALUES (@Order_Id,@Supplier_Id,@Address,@Project_Id,@dtpDate,@Material_Id,@Material_Name,@Unit,@Quantity,@Unit_Price,@Amount)", conn)
looking at the code below I have a form that is inserting data from text boxes and a datetimepicker into my database.If Date.text and Shift.text already exist in a row then UPDATE instead of INSERT a new row?
conn.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=database.mdb;" da.SelectCommand = New OleDbCommand("SELECT ID, idate, icomment, ishift FROM table") da.SelectCommand.Connection = conn
