Ok im using an image as checkbox. so when i click the label next to it it will change from Uncheck image to Check image...
If checkInj.Image = My.Resources.unchecked Then
checkInj.Image = My.Resources.checked
Else
[code].....
I am creating an Interactive map which displays the facilities when the user clicks on the Checkbox, such as toilets. It will display all the toilet locations via PictureBoxes. I want to do this without having to write all this code?
Private Sub chkCash_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chkCash.CheckedChanged
If chkToilet.Checked And RadioButton1.Checked Then
[CODE]...
I am creating an Interactive map which displays the facilities when the user clicks on the Checkbox, such as toilets.It will display all the toilet locations via PictureBoxes.I want to do this without having to write all this code?[code].....
View 15 RepliesI have a ListView with Checkboxes in vb.net and what I want to do is when the user check the checkbox, the program ignore the response of the user in checking the checkbox, instead it leaves the checkbox uncheck.
View 4 RepliesI am working on a small desktop form in VB 2010 and am trying to place a pictureBox with an image in it, next to another pictureBox already located on the form when the user clicks a button.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim tool As String
[Code]....
But for some reason the newPictureBox with image from "ptext" does not show up on the form. When I specify the new Point to be something like, (50,50) instead of getting the first pictureBox coordinates, the new pictureBox shows up in the right place.
Am I using System.Drawing.Point wrong? Or is there some other error that I'm making?
I have a datagridview populated from 3 tables....It also has a checkbox column my question is how do I get the Serial Numbers of the SerialNumber column when the user decides to check multiple checkboxes..is it possible to save multiple data simultaneously?? For example, the user decides to requests 10 equipment ...
View 10 RepliesIn DGV, I have 2 checkbox columns. Column1 and Column 2. Once I checked a checkbox in a column and it happens that there is already a checked checkbox in the other column and they are in the same ROW. It will automatically disable/uncheck the Checked Checkbox.. Meaning only One CheckBox must be allowed to be marked if happens that they are in the same row.
Imports System.Data.SqlClient
Imports System.Text.RegularExpressions
Imports System.IO
[code].....
I have a system which stores fee's paid for a youth teams players.A textfile stores:player name|trainingsessionsattended|amountpaidin..Each line is a new player's entry.I need to make a form that allows the user to input the amount paid by each player at the end of a training session.I did think of doing a single dropdown box and allowing the user to select a user and enter how much he/she paid and entering each players fee's one by one. But this is not practical, considering there are 20 players, this may take a while.I thought of having a listview with every players name and then using this to add the players fee's but am not entirely sure how to go about this.
View 8 RepliesobjdataAdapter.SelectCommand = New SqlCommand()
objdataAdapter.SelectCommand.Connection = objconnection
objdataAdapter.SelectCommand.CommandText = "Select SerialNumber, EmailAddress, Results FROM Email WHERE SerialNumber='" & txtCriteria.Text & "'"
[code]....
What I want to do is for every row of data in the datagridview, i want to add a column for checkbox. The checkbox will be enabled or disabled based on the value found in the field results. The first time I am pressing the button, it works fine. But the second time i query, it keeps adding another checkbox to the same row. Even for the nth time. Everytime i press the button, a checkbox is added. I just want one checkbox every time i query the dataset.
I'm trying to set my software up so that you could invert the selection if needed.
This is the code I have so far:
Private Sub InvertSelectionToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InvertSelectionToolStripMenuItem.Click
If Me.chk_7zip.Checked = True Then
[Code]....
I already figured out how to Select all and Select none and it seems to know that when I want to invert the selection if there is no checkmark in the checkbox that it should check it but if I hit it again or if was selected previously it won't uncheck it..
I have an array of structs and each struct contains values for the checkboxes. I am trying to display the checkbox values contained within a particular struct.
MyStruct is an array of structs which has a values for the checkboxes
ChkBoxCol is the collection of check boxes for the form.
I am iterating through the collection as follows:
[Code]...
What I am noticing is that if the check boxes are checked in order (checkbox 1, 2, 3, 4...etc) the code works fine and the values are displayed correctly in the form. However, if the check boxes are not checked in order (4, 5, 7...etc) the code does not write the values of the check boxes and instead keeps them blank. I just need to display the values for the check boxes for a specific struct.
In Vb.net, I want to make a program which checks and unchecks a checkbox in another program with just a hotkey (X for example).
I also already downloaded spyxx to get the class.
I use a code for place a CheckBox Column, into a DatagridView.This CheckBox column is the last Column of the DataGridView.Now i wants the CheckBox column at the first place of the datagridView.The DataGridView is filled from a database with several Columns.Can i place the Checkbox to the front?this is mij code, that place the CheckBox on the last place..[code]
View 4 RepliesI would like to copy the value of a check box when it is checked and I have two checkboxes. CheckBox1 and CheckBox2. Id like to be able to click 'Submit' and copy the values from the Checked CheckBoxes. Idealy, if both are checked then it would return something like this "CheckBox1, CheckBox2".
View 1 RepliesHere are quick scenarios: there are two chkbox columns "Parent" and "Child" In the Parent Column, you're only allowed to choose ONE chkbox AND the chosen chkbox in the PARENT shouldn't be available to check in the CHILD chkbox, while in the child you're allowed to choose as many as you want.
The selected records (checked chkboxes) should be transfered in the database after clicking the Consolidate Button.
[Code]...
I am putting together a very simple GridView, one of the columns is a CheckBox.I would like the checkbox to update the SQL table as it is checked, the field in my database is a bit field.Currently i have the following:
<asp:TemplateField>
<ItemTemplate>
<asp:CheckBox ID="CheckBox1" runat="server" Checked='<%# Bind("Purchased") %>' AutoPostBack="true" />
</ItemTemplate>
</asp:TemplateField>
This allows the Checkbox to be checked and unchecked however it does not update my SQL Database. I have tried a couple of things but can't seem to get this to work. I am assuming i'd need to write a custom bit of VB around the 'OnCheckedChanged', i do not want an edit button on the page!
How can i perform click to a checkbox using a shortcut?For example:
if control.modifierkeys = keys.cotrol and e.keycode = keys.d then
here? (the .performclick() is not available)
endif
What I have is 10 checkboxes 1 to 10 which all can be one of several options (the options are constant for all the checkboxes) and I need to change a variable according to what the checkbox.text preperty contains.
I plan to use a For to next statement
For i = 0 to 9
If Checkbox(i+1).text = "hello" then
String(i) = "bye"
[Code]....
However I cannot refer to a checkbox in the way i have done above. Essentially how do get what the checkbox contains based on on my counter, i.
Note: it is i+1 because the first check box starts at one yet my counter starts at zero.
I'm trying to set my software up so that when I check the checkbox for winRAR to be installed, it'll pop up a new window asking if I want to install the 32 bit version or the 64 bit version. I have no problem getting the window to show up but than if I try to exit out of the window and than uncheck the box (in case it was accidentally checked) it'll just open the window again. I am thinking I have to tell vb that when I uncheck the box it shouldn't do anything.
Here's my code.
(I know that the Nothing under the Me.chk_rar.Checked = False doesn't work but I left that blank once and it just opened a bunch of windows and crashed my system. I know it says "E:Music" right now but I just pointed it there so that there was something there normally it'll point to the other window. If I need to created a new Form for every little window that I have for instance the little window that I want to pop up, do I need to create a new form just for that little window to ask which architecture is needed and than giving the options for 32 bit or 64 bit.
Private Sub chk_rar_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chk_rar.CheckedChanged
Me.chk_rar.Checked = True
Process.Start("E:Music")
Me.chk_rar.Checked = False
Nothing
End Sub
I have a form with 2 datagridviews on it, each connected to to table in a database: dgv1 and dgv2.
- Dgv1 has a column called "Senders" and a column called "Recievers".
- Dgv2 has a column called "Recievers"(this is a master list of recievers) and a checkbox column in it.
Basically, when you click a checkbox in dgv2, it copies the name corresponding to it(from "Recievers"), to the "Recievers" column in dgv1.What i want to happen is, when the user selects a name from the "Senders" column in dgv1, it should automatically search the "Recievers" column (also in dgv1) for names(each name is on another line in the cell), based on the "Recievers" columnin dgv2, and if it's in the cell, it should check the checkboxs corresponding to the name in dgv2.
I have a program with a checkbox. I want to get it On/Off with a hotkey. When hotkey is activated: It should click on the checkbox Even when the program which contains the checkbox is not focused (so if other window is above it).
This is my code
Public Class Form1
Declare Sub mouse_event Lib "user32" Alias "mouse_event" (ByVal dwFlags As Integer, ByVal dx As Integer, ByVal dy As Integer, ByVal cButtons As Integer, ByVal dwExtraInfo As Integer)
Private Const MOUSEEVENTF_ABSOLUTE = &H8000 ' absolute move
[code]....
which code to enter to make it possible with the non-focused program.And (0,0,0,0) --> Which one is the X and Y
Public Class Form1
Private Sub CheckBox2_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox2.CheckedChanged
[Code]....
As you can see, when I enable/disable my checkbox it enables/disables my textbox.
The thing is, I have more than one textbox, how can i add more textboxes to be enabled/disabled?
I tried using If TextBox2.Enabled = True AND TextBox1.Enabled = True Then
TextBox2.Enabled = False And TextBox1.Enabled = False. (of course fails)
having a bit of trouble with a bit of code. This is going to be a bit complicated to explain so i hope i can get the idea across. The idea is that the following bit of code uses an array called "lines" which has been loaded from a text file in a previous subroutine. I then want the status of each Checkbox to edit a set of lines in the array.
[Code]...
I have a form with 2 datagridviews on it, each connected to to table in a database: datagridview1 and datagridview2.Datagridview1 has a column called names and a column called recievers.Datagridview2 has a column called senders and a checkbox column in it.
The user will first select a row in datagridview1 and then click a check box in datagridview2.What i want to do is when the user clicks a check box in datagridview2, i want it to copy the value in the "names" column of the same row, to the receivers column of the selected row in datagridview1.
I have 2 DatagridViewChecKboxColumn. What I want to happen is that a(Submit)button will be disabled until the checkbox2 will be checked. How will I do this if my checkboxes are DataGridViewCheckboxColumn? What loop will I do,because there's a possibility that I'll be checking the last checkbox?
I found this, but it's not working.
If (DataGridView1.Columns(e.ColumnIndex).Name = "Child") = True Then
btnConso.Enabled = True
ElseIf (DataGridView1.Columns(e.ColumnIndex).Name = "Child") = False Then
[Code]....
just for programming practice, want to know if: for example CheckedListBox1.Items.Add("October", CheckState.Indeterminate) has any advantage to use. Although Indeterminate and Unchecked have zero checked states. Why VB has provided these two? why not one only(Unchecked)? Is it a reason to get the checkbox checked when app starts by default?
View 10 RepliesDoes anybody know how to sort a Listview by checkbox state, so all checked items are at the top of the list. I'm targeting Framework 2.0.
View 2 RepliesI have a question, I can't really find the answer...Basically I have 2 FormsIn form number 1 I have 2 pictureboxes. I want to create a checkbox in form2 that says if checkbox 1 is checked then show picture 1 in form 1
View 1 RepliesI generated columns from database and getting cell values from database too. my problem is that for some columns I have to generate checkbox in each cell at runtime.I m using visual studio 2010.
View 2 RepliesMy program takes a checkboxed item and depending on the serial number that is present on the item on the invoice, subtracts one from the amount list I have the following in a listview on a details page which I added with the following
[Code]...
Right now it doesn't look like it does anything. I have tried changing my index's on my subitems to 1 and 3 instead of 0 and 2 but i figured because they are subitems that they need to be subitem index 0 and subitem index 2. if that makes sense.