In VS2005, using vb.net:[code]When I look at the Mssg it says that the Mssg.Body couldn't be retrieved because of protection level.Body = {"Process. Data is inaccessible due to its protection level. Only public types can be processed."}I copied this code off of the internet, and I have been successful in writing to the queue, but this code is driving me up the wall.
View 1 Replies
Recently i upgraded my .NET framework from 1.1 to 2.0 (visual studio 2003 to visual studio 2010) and after that I always faced some problem during development while debugging. Somebody facing this before? I can't see what is the data inside some object like following examples (right click and quick watch):
'objCircle' is not declared. It may be inaccessible due to its protection level.
The project currently contains references to more than one version of CDMObjects, a direct reference to version 1.0.4394.17018 and an indirect reference (through 'ProcessFlow.frmBPSOD.m_CopyCircle') to version 1.0.4455.20763. Change the direct reference to use version 1.0.4455.20763 (or higher) of CDMObjects.
Today I decided to come up with a program that would be useful for me in VB.net (I have never coded in VB.net before). All is going fine up till this point but I have hit a snag with the error mentioned above. The problem is with the windowssevenexistsonsource boolean under the get get of profiles comment. I will also take any code criticism well as I would like to get out of bad practices before I start! (the sub does end but I have not included that code)
Code:
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Check that the entries required are not empty
If String.IsNullOrEmpty(sourceipaddress.Text) Or String.IsNullOrEmpty(destinationipaddress.Text) Then
[code]....
The error message says : 1stoutput is not declared. It may inaccessible due to its protection level. This is the part of my code I'm having a problem with:
lstoutput.Items.Clear()
lstoutput.Items.Add("invoice number" & invoiceid)
lstoutput.Items.Add(" ")
[code].....
Dont have any intellisense when creating a sample MVC3 app.Config files are fine, project compiles and works as it should when ran...Have MVC3 & MVC4 installed, same thing with each.Have VS2010 & VS11 installed (running fine side by side), same thing here... no intellisense.
Errors:'ViewData' is not declared. It may be inaccessible due to its protection level.'Url' is not declared. It may be inaccessible due to its protection level.'Partial' is not a member of 'System.Web.WebPages.Html.HtmlHelper'.'ActionLink' is not a member of 'System.Web.WebPages.Html.HtmlHelper'.
The 'ActionLink' error should be trageting the Mvc library should it not?
I actually already made up some pages in .NET environment,and i'm using VB.NET as my back-end.I have 2 files of A.ascx and B.ascx and each of them have the A.ascx.vb and B.ascx.vb files altogether.But here's the interesting part.I use 'isEqual' variable inside one of the method I typed in.And if I use it inside one of the vb file then, I could not use it into another vb file.Thus, Once I used that 'isEqual' inside of these 2 vb (files), I will got the error appeared as from one of the vb file;'isEqual' is not declared. It may be inaccessible due to its protection level.
My code is actually this one;
Protected Sub bindTable()
'add somemore for searching with dropdown list
Dim sSql As String = "SELECT *, C.companyname FROM quotationmst Q"
Dim sColumn As String = Nothing
[code]....
when I debug my program, an error comes up, and says that I need to declare a "getroot" Here is the error I get: Error 'GetRoot' is not declared. It may be inaccessible due to its protection level.These are the codes that have the error.
Private Sub bt_defaultmac_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles bt_defaultmac.Click
If IsOkay() = False Then
Exit Sub
End If
[code]....
I've just received 100+ of these errors stemming from my dataset.designer.vb I can safely say I have no idea what has happened, I was changing the datatype from 'money' to 'decimal(18,2)' in my sql server database and then I saved the updated table. When I ran the program next all the errors appeared. I can't find much on what it means, and I'm severely confused as to how it occurred.
[Code]...
I am trying to add a code for a print button (the same code I have used successfully on another project) but this time it's not working. I typed:
PrintForm1.PrintAction = Printing.PrintAction.PrintToPreview
PrintForm1.Print()
BUT... It says "'PrintForm1' is not declared. It may be inaccessible due to it's protection level." I didn't change the name of Form1 or anything so I am really confused why my last project worked and this one doesn't.
I am creating a script programatically. However I cannot access the dataset from the modeule. See "Sample" below. ('ds' is not declared. It may be inaccessible due to its protection level.)
[Code].....
I am unable to call public routines in a public class in AppCode.To debug, I built a new blank website project with a public class Class1 in AppCode and a public function Foo returning a string "Hello World".A sub CallFoo calls Foo without error if CallFoo is in Class1. If CallFoo is moved to a new class Class2 I get the above error.I have rebuilt this test site from scratch targeting Framework 3.5 and 4 with the same error. Oddly, I have found I am able to reference public constants without error.
View 2 Repliesi'm sort of a n00b to VB and was wondering how to make a variable available across multiple Subs. It's just a test app to get familiar with VB.My Code:[code] "Sentences" is not declared. It may be in accessable due to it's protection level."
View 4 RepliesI have a bunch of controls in my .aspx page. Also, the designer is also generating code for those controls.When i am trying to use any of these controls, i am getting the above mentioned error for all the controls in the page.
View 1 RepliesI'm trying to get the model dropdown be affected by + selCurrentManuf.Text. I get this error:
'selCurrentManuf' is not declared. It may be inaccessible due to its protection level.
I can access the drop down in another part of the page like this..
Dim sc1_currentmanuf As String = CType(e.Item.FindControl("selCurrentManuf"), DropDownList).Text
However in the function I am trying to use selCurrentManuf does not have access to e.
Dim msg As String
msg = "Hello"
Execute(msg)
I'm just taking over an asp.net/vb site, and I'm definitely still learning. I'm receiving the following error:
BC30451: 'ByOwner' is not declared. It may be inaccessible due to its protection level.
I call a datasource with:
<asp:GridView ID="CaseCountByOwner" runat="server" AllowSorting="true" DataSourceID="ByOwner"
And here's what is in the codefile:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
HitMe.AddHit(Request.UserHostAddress, Request.UserAgent, Request.Url.ToString)
Dim user As String = Request.QueryString("user")
If user.Length() = 0 Then
[Code] .....
I've got a form with a listbox on it.In a second form I inherit the complete first form. But when I try to use that listbox in the second form with e.g.Index = LstWoodshop.FindString (Order(0))(where LstWoodshop is that inherited Listbox) I get the error message:'LstWood shop' is not declared. It may be inaccessible due to its protection level.What or where can I change this setting so that this listbox on form 1 is also available/accessible on form 2?
View 5 RepliesI am trying to figure out a way to implement password protection on documents that a program I am working on creates. They should remain with the document regardless of where it is copied to or sent.Here is a rough sequence of events:
1. Application Opens (no document loaded).
2. User opens document with extension registered to application.(could also be # 1 if they clicked on the document directly)
3. Application Security checks document for security and prompts if necessary.
4. If prompted, user enters password.
5. Application checks password.
6. If passed, document opens, otherwise user is notified of failure.
It happens quite frequently, more times per day, that with Visual Studio 2010, during the debugging, when I used Immediate commands like:I receive the following error:
'NamedVariable' is not declared. It
may be inaccessible due to its
protection level.
I am trying to implement a sub-class as a property of another class. Eg:
[Code]...
This is my code:::::
Public
Class Form1
Private Declare
Function Key Lib
[code].....
is my error message:
Error 1 'Label1' is not declared. It may be inaccessible due to its protection level.
Error 2 'Label2' is not declared. It may be inaccessible due to its protection level.
Error 3 'Label3' is not declared. It may be inaccessible due to its protection level.
Error 4 'Label4' is not declared. It may be inaccessible due to its protection level.
I am using visual studio 2010 and I am trying to retrieve some data from a mysql database. Installed using wamp.
I have already set connection to the database by going to 'Project', 'Application Properties', 'Settings'.
I have this error "'mAuto1' is not declared. It may be inaccessible due to its protection level"
The code below is for a simple retrieve:[code...]
This program was just a test to see if I can display results of a mysql query on a form label. I wanted to display results on the click of a button.
I'm trying to improve performance of an application by introducing threading (see my earlier question). I have filled a Queue(of String) with XML messages and I now want to setup two threads to post these messages to a webserver). This process needs to ensure that each message is only posted once. Would a BackgroundWorker (or two) be suitable for this?
View 2 RepliesI am processing a local message queue and every now and then getting an "Insufficient resources to perform operation" error message when there is over 2GB RAM free.The queue is very small (often only a couple of items (if that) and never exceeds 50 items), with the items themselves being just a very basic class that consists of a filename (as a string), two integers, two booleans and one enum (i.e. very little actual data)In order to check the size of the message queue, I have a timer that ticks every 5 seconds, and when it does calls the following code:
Private Function GetQueueLength() As Integer
Dim QueueLength As Message() = ProcessQueue.GetAllMessages
Dim Length As Integer = QueueLength.Length[code].....
It read some data from a database and put the result into a word document. In this document is a blanc table with a bookmark to indicate the start position.In debugmode this works fine and after distributing thsi is still working fine.A user called me to say that the word document was a complete mess. I ran the application in production mode and yes it is a complete mess. Because the bookmark is not found, the data will be enterd into the wrong column.When i return to debug mode, the apllication is still correct and the result on the word document is good. Behalf of this, there are users who don't have this problem at all.
View 3 RepliesI am running my application and at random times when it is unable to connect to the database I get an error saying "A Transport-level error has occurred when receiving results from the server. (provider, TCP Provider, error: 0- The specified network name is no longer available.) How can I stop this pop up from coming up? It comes up every once in a while and I want to disable that.
View 6 RepliesI am compiling a VB Project in VS2005 with SP1. This is the error that I am getting when I build this project.
12>C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Microsoft.Common.targets(802,9): error MSB3108: Error executing the ResolveNonMSBuildProjectOutput task. An error occurred while parsing EntityName. Line 1, position 115.Microsoft.Common.targets is a file present in WINDOWS folder and used internally by VS2005 while building the projects. I am not able to get any clue why this error has come.
I am getting an error ")" expected when I am compile the code. I am getting the at "num"
[Code]....
I am creating an Excel add-in written in VB.NET. I would like to bind KeyDown and KeyUp events to the spreadsheet to record when the user presses and releases the arrow keys while navigating the spreadsheetIdeally, these events would be built into Excel alongside the native SheetActivate and SheetSelectionChange events, for example. Alas, they are not.
View 1 RepliesHow to add application level error handler in vb.net win forms
View 1 Replies
