Open "c:Batch1Test.txt" For Output As #3 is used in VB6, will not work in vs2010. How can i get this re-coded to open a datafile on harddrive, then input the records 1 at a rtime (sequentially).
something about namespace.visualbasic, which i am not familiar with.
I installed VS2010 SP1/TFS2010 SP1. Now VB solutions that built successfully now fail Rebuild with massive lists of errors, eg:
Error 14 'IsNothing' is not declared. It may be inaccessible due to its protection level. C:ProjectsNewDoxDOXLinkDocType.vb 142 12 DOXLink
Error 12 'ChrW' is not a member of 'VisualBasic'. C:ProjectsNewDoxDOXLinkDOXDBDataSet.Designer.vb 14947 120 DOXLink
Error 44 'Computer' is not a member of 'My'. C:ProjectsNewDoxDOXLinkLanFolder.vb 110 20 DOXLink
Error 15 'vbCrLf' is not declared. It may be inaccessible due to its protection
[code]....
This may be a strange question and have no answer but I thought I would post it to see how you would go about doing it. I have a line of code:
Grade = Math.Round((Math.Abs(CorrectAnswers) / TotalQuestions) * 100)
Basically that line just figures out the grade no major code work there, what I want to do is execute that specific line with different variables without running the whole application and navigating to the point in the application which for this segment would be completing a 150 question exam, or coding some #temp page and running it from there.
Its about updating, it check a remote server for version. For example i have version 1.0.0 so the updater says that there is a update (1.0.5)
[Code]...
i recently received a new work pc and have installed visual studio 2010 premium on it. this was installed on my old machine as well, the only differece between the two PCs being my old one was 32bit and the new one is 64bit.With that said, when i create a windows form project and drop a control on a form, double click that control, the default event code is created for me.It is missing the "ByVal" portion of the code. Using a textbox as an example, below is the code it generates. Is there a setting that I'm just missing and need to turn on? I've been using visual studio since version 2005 and i've never seen this before.
Private Sub TextBox1_TextChanged(sender As System.Object, e As System.EventArgs) Handles TextBox1.TextChanged
End Sub
I'm suppose to do an application as follows..I should dial a modem with Phone number using Gsm Modem. i Searched a lot in Google for some source/idea's in vb.net but i dint get .I have code in vb6.0 so I converted that in to vb.net. In that i'm getting errors correct my code.Here is my code.I'm fresher as well new to VB.net programming.Because of stress for urgent completion of work,not able to spend much time.
[Code]...
I'm new to visual basic 2008 and have worked on this question for quite a bit before deciding to come to this website and asking for someone to walk me through it."Write a program that requests an amount of money as input and displays the names of all liquids for which a gallon could be purchased with that amount of money. The information in the (table 6.2) should be read from a file. As an example if the user has $2.35, then the following should be displayed in the list box: "You can purchase one gallon of any of the following liquids:Bleach Milk".[code]
View 1 RepliesI'm converting some C# code to VB.Net, as it's a language I know better, I've got some code that I can't figure out...
Dim mybtn As New ImageButton()
mybtn.ImageUrl = _imgUrl
Select Case _buttonType
Case ButtonType.Backpage
[CODE]...........
This is giving 2 errors:
Me.btnBackpage_Click = Delegate 'System.Web.UI.WebControls.CommandEventHandler' requires an 'AddressOf' expression or lambda expression as the only argument to its constructor.
And
mybtn.Command = 'Public Event Command(sender As Object, e As System.Web.UI.WebControls.CommandEventArgs)' is an event, and cannot be called directly. Use a 'RaiseEvent' statement to raise an event.
I am working on a project for school and I am encountering several errors in my code relating to the numeric up down boxes I have in the application. I have inserted my code and the error list below. I'm sure that it is probably something really simply but I am learning the language on my own and I am a little stumped here.
View 18 RepliesI found a piece of code that I am trying to get to work because it could potentially solve an issue I am having. Here is the link to the site[url]...
the code can be downloaded here[url]...
I am using VB.net 2010 suite but I am getting a error that says "May return null value" I have been unsuccessful in debugging it.
I just started to build a website using visual web developer 2010 express.I am getting a syntax error when trying to program a submit button...this is the code i have in my Sub menu for the submit button.
Protected Sub Button1_Click(sender As Object, e As System.EventArgs) Handles Button1.Click
Switch(RadioButtonList1.SelectedValue)
{
[code].....
is it possible to add some VB.net code to handle all the errors in my application. (and not to go in each sub and add the on error intruction) I want to handle every error.
View 6 RepliesI have a VB.net Solution in VS 2008 with 2 projects in it (The machine is running Windows XP Professional). I can build the one project fine. The other one the build keeps failing. Their are no errors in the code. I don't get any message when the build fail except, VS ask me if i want to run the last successful build. I have tryed cleaning the solution and then building and rebuilding it.
View 1 RepliesWhen running code analysis on my project, I receive the following message:
CA1051 : Microsoft.Design : Because field 'ClassName.VarName' is visible outside of its declaring type, change its accessibility to private and add a property, with the same accessibility as the field has currently, to provide access to it.
Public VarName As String to this:Public Property VarName As String
I don't understand why the Property keyword is so important in this particular case. Can anyone provide an explanation as to why changing this member to a Property makes a significant difference to code analysis?
I have this code:
Public Class Transform
Dim inputFile As IO.StringReader ' Object variable
Private Sub OpenFileDialog1_FileOk(ByVal sender As System.Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles ofdOpenFile.FileOk
[code]....
And I am getting these errors:
'Private Sub Transform_Load(sender As Object, e As System.EventArgs)' has multiple definitions with identical signatures. Line 15
'strOutputPath' is not declared. It may be inaccessible due to its protection level. Line 51
Type 'XslCompiledTransform' is not defined. Line 83
I've deleted the original code, but to be specific, when I developed a form using Buttons and Textboxes I didn't place them in any specific order. The result was that as the user clicks the cursor, it would bounce around the page in what would appear to be a random sequence, but in fact was going to the next button/box in order of how it appeared in the code section of the form. Naturally, my first inclination was ..... OK, that's how it's going to be, I'll just cut and paste the code in the order of how I want the cursor to move. What happened was I generated several errors and the file would not compile. I can find no information on how to properly cut/paste code sections without generating these types of errors. BTW, I did try the focus() function and it did direct the cursor to the appropriate box, but it also only allowed 1 character to be entered in the textbox and summarily directed the cursor to the next box.
View 2 RepliesI am not exactly sure what I am doing wrong. I need to convert Me.xCommissionLabel.Text = Format(Me.xCommissionLabel.Text, "currency") to a toString, so it displays a dollar sign, 2 decimal places. so I did this. Me.xCommissionLabel.Text = commissionLabel.ToString(CType("C", IFormatProvider))When I run the program and input the data I get: A first chance exception of type 'System.InvalidCastException' occurred in Commission Project.exe. [code]
View 7 RepliesI have almost completed a translation from C# to VB.NET, however, I run into some small errors[code]...
View 1 RepliesIs it possible to check the code and find all places where conversion errors might happen.for Ex: Wherever = operator is used , i have to check the type of the LHS and RHS variable.
Is it possible with following softwares?
So I've created a very simple UserControl that is pretty much just a combo box that has US States in it and a couple properties to return the selected value as an enumeration or a string, etc.The enumeration and string values I'm using are being referenced from an external library which is working. However, when I add my user control to another project the designer-generated code has errors in it. [code] I would assume that this probably has something to do with project settings or something similar for the user control. The control itself is in a separate project and compiled as a .dll which has been added to my main project's toolbox and subsequently added to my form. [code]
View 11 RepliesI am working with VB Express 2008 and i am having a lot of errors appear when using code from other VB Versions. Is their a computability problem
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs)Handles Button2.Click
'CLICK TO OPEN DVD ROM DRAW Declare mciSendStringA Lib "winmm.dll" (ByVal lpstrCommand As String, _
[CODE]...
Use code tags when posting your code. Code tags are used like so =>
This is my
If CheckedListBox1.SelectedItem IsNot Nothing Then
MsgBox("Your favourites have been saved")
ListBox7.Items.AddRange(CheckedListBox1.CheckedItems)
End If
End Sub
What i want it to do is to add the selected items from checkedlistbox1 to listbox7 (but not remove them all together)
This is my error: Overload resolution failed because no accessible 'AddRange' can be called with these arguments:
'Public Sub AddRange(items() As Object)': Value of type 'System.Windows.Forms.CheckedListBox.CheckedItemCollection' cannot be converted to '1-dimensional array of Object'.
[CODE]...
I am working with Visual Studio Pro 2008, and trying to build a Visual Basic project for my College Course. The coursework is not my question, it's not difficult just time consuming. My problem appears to be much deeper, and is certainly causing me to take way more time than I should need to debug and completely random occurence. I don't mind posting the source code but it is rather vast, made up of 23 objects, each ranging from 200-700 lines. I am running Windows 7 Pro x64, and since I need Jet4.0 DB Engine or some such I had to set the compiler to target x86 CPUs. I have my suspicions, and as queried in my topic, I was wondering if VB Designer code can become corrupt or cause funky errors?
The layout I have is something like this:
frmMain
-frmCustomer
--frmAddCustomer
--frmUpdateCustomer
-frmContract
--frmAddContract
--frmUpdateContract
Each steps forward using the ShowDialog method. Initially I thought it was a fluke, but I had frmAddCustomer open and when I closed it (the code simply does me.close, nothing fancy), it jumped all the way back to frmMain, skipping frmCustomer. At first I was baffled, I spent some 45 minutes trying to figure out why. No errors or exceptions, so it didn't seem to be anything wrong really. Since I was building this project in stages I loaded the same form from a previous stage and copied/pasted the new code in. This seemed to fix it, but it happened again after coding for another 30 minutes to an hour. It also isn't limited to that form, I have now experienced the same issue with frmAddContract & frmUpdateContract.
After upgrading to .net 4, my project is throwing errors everywhere I try and change the Foreground Color in code. It works fine in .net 2, 3 and 3.5
View 18 Repliesi'm a freshman and was handed this assignment a short while ago and i'm having extreme difficulty figuring out why i keep getting the following error message whenever i click btnGenerate.Click on the form:Error1: Unable to apply this change while debugging. 'Private Sub GroupBox1_Enter(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles GroupBox1.Enter' was deleted that modifies 'Public Class Form1'. You must revert the change or stop the debugging sessionBasically the assignment is requesting that we build a 'Call Cost Calculator' and since im relatively new to this i've never worked with strings before and also get the follow errors:Warning2Variable 'sCountryBeingPhoned' is used before it has been assigned a value. A null reference exception could result at runtime.Warning3Variable 'sPhonePlan' is used before it has been assigned a value. A null reference exception could result at runtime.
My form codes:
vb
Public Class Form1 'heading Const sFormHeading As String = "Call Cost
[code]....
I reals because it's driving me mad and i'm honestly quite literally stuck and can't move on until i get this sorted.
I have a .net application that uses customerrors web.config module to display meaningful messages for errors. It works without any issues for 500 errors/exceptions caused by non-ajax and ajax components (updatepanel). However, in a scenario where updatepanel's asynchronous request times out, there is no error raised at all. I was able to see the timeout in firebug and come up with a solution that would at least display the error message as an alert and then redirect the user to the 500 error page using javascript but it's not quite doing what the rest of the application does in case of an unhandled errors like these. I basically just want everything to go through "LogEvent" mechanism so based on the severity of the error, it does the necessary work.This 500 error page doesn't have anything in the Server.GetLastError() for these timeout scenarios. Is this an expected behaviour? Can it be changed so I do have access to these timeouts in Server.GetLastError() OR maybe just run this error through "LogEvent" mechanism? Is there a better/more graceful way to handle this issue?
Below is my code to give you an idea, not exactly what I have in my application but pretty close.
Web.Config
<customErrors mode="On" defaultRedirect="~/Errors/ErrorUnknown.aspx" redirectMode="ResponseRewrite">
<error statusCode="500" redirect="~/Errors/Error500.aspx" />
</customErrors>
[code]....
I have some vb.net code which should print out labels using Teklynx LabelView software (which I've had working before.)Problem is, it runs fine on Dev machine, but when I run it on the end user's PC, I don't get any error messages until it completely dies with the "Send error report to Microsoft" message.
How can I troubleshoot this???
[Code]...
I'm getting a ton of errors like this when attempting to build an empty VB.NET project: 'GenerateCodeAttribute' is ambiguous in the namespace 'System.CodeDom.Compiler' Is this some problem with my .NET installation?
View 1 RepliesSo when i build or click debug on my program. No errors come up and its smooth. So i decide to publish my programme. However. I come up with a bunch of errors during the publishing.
Here they are:Error 1 Cannot publish because a project failed to build. 1 1 Simple CALC
Error 2 Unable to copy file "binReleaseSimple CALC.exe.manifest" to "binReleaseapp.publishApplication FilesSimple CALC_1_0_0_0Simple CALC.exe.manifest". The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
I have a program in VB.NET that has a webbrowser contorl. I wanted to zoom on a page and i found a tutorial online that involved something like thiswebbrowser1.ActiveXInstance.ExecWB(OLECMD...When i went on and typed it on, there's nothing called ExecWB.Why is that? Is it because i'm using IE9?
View 1 Replies
