FrmAddContract & FrmUpdateContract - VB Designer Code Become Corrupt Or Cause Funky Errors ?
May 18, 2010
I am working with Visual Studio Pro 2008, and trying to build a Visual Basic project for my College Course. The coursework is not my question, it's not difficult just time consuming. My problem appears to be much deeper, and is certainly causing me to take way more time than I should need to debug and completely random occurence. I don't mind posting the source code but it is rather vast, made up of 23 objects, each ranging from 200-700 lines. I am running Windows 7 Pro x64, and since I need Jet4.0 DB Engine or some such I had to set the compiler to target x86 CPUs. I have my suspicions, and as queried in my topic, I was wondering if VB Designer code can become corrupt or cause funky errors?
The layout I have is something like this:
frmMain
-frmCustomer
--frmAddCustomer
--frmUpdateCustomer
-frmContract
--frmAddContract
--frmUpdateContract
Each steps forward using the ShowDialog method. Initially I thought it was a fluke, but I had frmAddCustomer open and when I closed it (the code simply does me.close, nothing fancy), it jumped all the way back to frmMain, skipping frmCustomer. At first I was baffled, I spent some 45 minutes trying to figure out why. No errors or exceptions, so it didn't seem to be anything wrong really. Since I was building this project in stages I loaded the same form from a previous stage and copied/pasted the new code in. This seemed to fix it, but it happened again after coding for another 30 minutes to an hour. It also isn't limited to that form, I have now experienced the same issue with frmAddContract & frmUpdateContract.
View 6 Replies
ADVERTISEMENT
Jul 21, 2009
So I've created a very simple UserControl that is pretty much just a combo box that has US States in it and a couple properties to return the selected value as an enumeration or a string, etc.The enumeration and string values I'm using are being referenced from an external library which is working. However, when I add my user control to another project the designer-generated code has errors in it. [code] I would assume that this probably has something to do with project settings or something similar for the user control. The control itself is in a separate project and compiled as a .dll which has been added to my main project's toolbox and subsequently added to my form. [code]
View 11 Replies
Mar 4, 2009
I have coded in the older version of VB for years (VB6 and prior) and Recently I just began learning VB 2008. In my current project I made a mistake in a form name frmAuthors and so far I am unable to recover. The problem is that I tried to have the form inherit a class I had created (first mistake). The IDE generated a popup message stating the error and provided the option of changing from inheritance from system.windows.forms to the class I had created. I said yes just to see what would happen (I was bored so I was up for something new) and that's when the form got corrupted.Is there a way to let frmAuthors go back to recognizing itself as a form object and not a member of the object I had created?
View 2 Replies
Aug 16, 2010
I support small local customers with VB2008 and MS Access applications (not VBA!). When I had to replace my machine, the new one came with Win7 64bit. Things failed immediately. I figured out how to compile VB for x86; but when I did that, I got a bunch of compile errors from the designer code, not my own. Typical of the errors is this one:
===Overload resolution failed because no accessible 'Add' can be called with these arguments:'Public Function Add(name As String) As System.Data.DataTable': Value of type 'Lozier01_PaintInventory.ds.InventoryDataTable' cannot be converted to 'String''Public Sub Add(table As System.Data.DataTable)': Value of type 'Lozier01_PaintInventory.ds.InventoryDataTable' cannot be converted to 'System.Data.DataTable'.
[code]....
View 1 Replies
Jun 18, 2010
Each time I drag the tables from the data sources into the form, frm, I get errors from the frm.designer.vb like
[Code]...
View 1 Replies
Sep 10, 2010
In my project, I have a local dataset (XSD) that I am using as local-temporary tables. I am getting a System.InvalidCastException when trying to access the field in one the tables. I believe this is because I my code is (incorrectly) not setting a field's value in a row before trying to access it.My problem is that the exception is breaking in the designer file and not in my code. As a result, I'm having difficulting determining which line of my code reading the field value before it has been set. Is there any way to configure Visual Studio to break in my code instead of in the designer created file?
View 1 Replies
May 25, 2009
I've been working on a project the last couple of day with the help of a lot of you out there. I've more or less finished the design of the interfase, but there are stange this happening with the form. I can say much about what is wrong because I dont understand it, but I would like to. I have added the form Class code and the Designer Code, is that enough or is more required? Theres a msgbox that popup in the form Load event which I placed there to see what I could learn about the GraphicsBuffer.
Imports System.Drawing
Imports System.Drawing.BufferedGraphics
Imports System.Drawing.BufferedGraphicsContext
[CODE]...
View 1 Replies
Dec 27, 2009
i want to see the designer code .. i want to see how myForm is generated using or extending form i mean in C# i can see the code in designer.cs file...but in vb.net i am nt able to see that..
View 1 Replies
Jan 9, 2012
I have a class that inherits the Windows Forms Combobox.The class should do extra work when items are added, but there is no such event.Therefore, I have added methods to add and clear items, which do the extra work.To avoid developers accessing the Items directly and adding to them, I have overloaded the Items property to throw an exception.This all works fine, except in the VS designer. The designer tries to access the Items property, gets the exception and shows an error.Is there a defined constant for when the VS designer compiles the code? This seems like it would be best suited to the task.
View 1 Replies
Mar 3, 2009
I have a program I have been working on, I was coding kind of late tonight and getting sleep. I saved my work and closed the program, but I did something wrong when I saved it. I accidentally saved it to a different folder then the one I was originally using.
View 5 Replies
Jul 19, 2010
I need some assistance again. In my previous posts, I asked about a good book to start learning how to us VB 2008.I had numerous replies, so I thought starting with Visual Basic 2008 would be a great start.As I am reading the book everything had mad sense up to Chapter 4. It's a simply program, and I thought I understood everything, until the middle of the chapter. So here's where I need help, and someone to explain my error.The author explains to place a Label & DateTimePicker onto the form, which I did. I renamed the label to NextWeek and DateTimePicker1 to DateChooser.Furthermore, I proceed to double click on DateChooser, which VB provides certain code automatically.[code]
After a few pages of reading, the author stated to put the following code under
Inherits class definition.[code]I went on and put the remainder of the code, which similar to the following:[code]The designer cannot process the code at line 51:Me. AutoScale Dimensions = New System.Drawing.SizseF(6.0!,13.0!)The code within the method 'Initilze Components' is generated by the designer and should not be manually modified. Please remove any changes and try opening the designer again.
View 4 Replies
Jan 20, 2011
but it's something I'm pretty consistently needing for the sake of my own sanity, so:If you add a Settings file to any project in Visual Studio, VS provides a GUI making it quick/easy to add a new Setting entry and assign it a Type; at that point the actual code-behind is automagically created with a variable and a property exposing that variable.Can we build our own designers to generate code this way, with a GUI allowing for those quick/easy variable/property assignments?
View 4 Replies
Mar 11, 2012
i have several forms in my solution that have listview controls and each of those listview controls uses the ListViewColumnSorter class that's provided on MSDN. This class requires a few lines of code in the Form_InitializeComponent Method of the Designer.Problem is, each time something on the form is changed, even if it's just a property of one of the controls, the designer deletes the code that I have for the listviews and I have to go back in and add it again.
View 4 Replies
Aug 2, 2010
I'm suppose to do an application as follows..I should dial a modem with Phone number using Gsm Modem. i Searched a lot in Google for some source/idea's in vb.net but i dint get .I have code in vb6.0 so I converted that in to vb.net. In that i'm getting errors correct my code.Here is my code.I'm fresher as well new to VB.net programming.Because of stress for urgent completion of work,not able to spend much time.
[Code]...
View 7 Replies
May 8, 2011
I'm new to visual basic 2008 and have worked on this question for quite a bit before deciding to come to this website and asking for someone to walk me through it."Write a program that requests an amount of money as input and displays the names of all liquids for which a gallon could be purchased with that amount of money. The information in the (table 6.2) should be read from a file. As an example if the user has $2.35, then the following should be displayed in the list box: "You can purchase one gallon of any of the following liquids:Bleach Milk".[code]
View 1 Replies
Nov 24, 2011
Please can someone point me in the right direction? I would like to build my own code designer window similar to that of the one within the VB2010 IDE.I am not sure how to tackle this, at first I was thinking of using RichTextBox as this can accommodate the fonts and colors.
An example of what I am trying to achieve.Should be able to outline, expand and colapse based on my own tags. e.g. in the VB.Net IDE a function and end function are tags that would produce an outline
Should be able to change color of text based on characters. e.g. ' would turn green in the VB.Net ide as it is a comment Should be able to indent based on specific tags. e.g. With - End with would auto indent within the VB.Net ide
I should be able to cover the text color and indents using RichTextBox, but I am struggling with the outline expand and colapse.The purpose of the project is to build a simple interface for creating config files that use only specific tags
View 1 Replies
Aug 25, 2010
On a recent project I stumbled across a page of code that looked unfamiliar, but which evidently was the code behind my form design. I'll copy and paste an excerpt to show you what I mean:
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
[code]....
I thought this was a useful way to back up my project via email because it's in text form. But now I can't find the same information. I've looked in the Object Browser but couldn't find it anywhere. I think I stumbled on it the first time by right clicking Go to definition, but now that doesn't take me anywhere if I click on say form1. So where will I find this mysterious page that has all the form items information in text, not graphic form? Can't find it anywhere.
View 2 Replies
Feb 26, 2012
Just wanted to know if you had some design code which was created, and that is all you have. Can you open this designer code and create the actual working main Form from this? I don't need this designer code for any specific task, just wanted to know if there is a command within VB Studio 2010 that creates the actual Form from the design code. For example; The following piece of designer code is for a simple program that finds the Circumference of a Circle.
[Code]....
View 3 Replies
Dec 15, 2010
When I try to open up a form designer, all I see is code and no form! How can I open up the designer, since the code says to modify using the designer and not the code editor?[code]....
View 4 Replies
May 7, 2010
I was working on my project (creating a new form), and when I switched from the code view back to the designer view, I got the following error:
The designer cannot process the code at line 118: Me.VDARSQLDATASET = New Veterinary_Digital_Anesthesia_Records.VDARSQLDATASET() The code within the method 'InitializeComponent' is generated by the designer and should not be manually modified. Please remove any changes and try opening the designer again.I am now getting this error on every page. This project has been working for months just fine, but for some reason the VDARSQLDATASET has dissapeared- kind of. I can still access the dataset (the file is still there), I just can't reference it in the code (intellisense can't find it).
View 2 Replies
Mar 14, 2011
I am creating a VB.NET (2005) GUI that uses several controls embedded into tab pages.When VB.NET autocompiles (if I switch windows) it adds lines of code to the .Designer file that causes errors:Windows' is not a member of 'System.Windows.Forms.TabPage'.is generated for:
Me.tbRxMinValidBits.TextAlign =
System.Windows.Forms.HorizontalAlignment.Right
The underlined part is what .NET is showing as the error.
[code].....
View 4 Replies
Aug 17, 2011
What is a standard way to open the Designer (automatically generated) code for a VB file?
As a workaround, I can get to it by searching the entire solution for some keyword that is usually only found in those files: Global, Partial, etc.
View 3 Replies
Feb 20, 2009
Most of my project was imported from an older version of VB (now I'm using 2008). All of the forms had a "Windows Form Designer Generated Code" that I could expand at the top of the form's code. When I created a new form, that was not there, and I found out that in the solution explorer you can "view all files" and expand the form and look at MyForm.Designer and that has the same type of instantiation code. My question is, is there some way to update the old ones so they too do not have that "form designer generated code" at the top?
View 1 Replies
Aug 15, 2012
I'm converting some C# code to VB.Net, as it's a language I know better, I've got some code that I can't figure out...
Dim mybtn As New ImageButton()
mybtn.ImageUrl = _imgUrl
Select Case _buttonType
Case ButtonType.Backpage
[CODE]...........
This is giving 2 errors:
Me.btnBackpage_Click = Delegate 'System.Web.UI.WebControls.CommandEventHandler' requires an 'AddressOf' expression or lambda expression as the only argument to its constructor.
And
mybtn.Command = 'Public Event Command(sender As Object, e As System.Web.UI.WebControls.CommandEventArgs)' is an event, and cannot be called directly. Use a 'RaiseEvent' statement to raise an event.
View 1 Replies
Mar 16, 2009
I am working on a project for school and I am encountering several errors in my code relating to the numeric up down boxes I have in the application. I have inserted my code and the error list below. I'm sure that it is probably something really simply but I am learning the language on my own and I am a little stumped here.
View 18 Replies
Jul 28, 2010
I found a piece of code that I am trying to get to work because it could potentially solve an issue I am having. Here is the link to the site[url]...
the code can be downloaded here[url]...
I am using VB.net 2010 suite but I am getting a error that says "May return null value" I have been unsuccessful in debugging it.
View 11 Replies
Jun 10, 2011
I just started to build a website using visual web developer 2010 express.I am getting a syntax error when trying to program a submit button...this is the code i have in my Sub menu for the submit button.
Protected Sub Button1_Click(sender As Object, e As System.EventArgs) Handles Button1.Click
Switch(RadioButtonList1.SelectedValue)
{
[code].....
View 2 Replies
Sep 16, 2010
Open "c:Batch1Test.txt" For Output As #3 is used in VB6, will not work in vs2010. How can i get this re-coded to open a datafile on harddrive, then input the records 1 at a rtime (sequentially).
something about namespace.visualbasic, which i am not familiar with.
View 2 Replies
Jun 1, 2010
I'm using VS2008 and SQL CE 3.5, building a smart client app. When I add a table adapter with this code:
UPDATE feeders
ET planningAreaID = @areaID
WHERE feeders.transformerID IN
[code].....
View 5 Replies
Oct 6, 2009
I use the code about video capture of this site, it ran very well ! VB Helper: HowTo: Capture video from a video device such as a Webcam with VB .NET But I want to change the interface of form then after I customize my new one with button, picturebox (with the right name), copy the code again except this paragraph #Region " Windows Form Designer generated code "
[Code]...
View 6 Replies
