WPF Mediaelement: Changing Video Source?
Jun 5, 2011if someone can tell me what I am doing horribly wrong. I have little experience with WPF....
View 2 Repliesif someone can tell me what I am doing horribly wrong. I have little experience with WPF....
View 2 RepliesI have a project that is WPF4 and VB.net. I'm trying to set a mediaelement's source using a mediatimeline (inside a storyboard construct), so I can loop the mediaelement. However, I cannot figure out how to set the source to a relative URI in WPF. I know how to do it in VB.net, but by setting the source there, I can't have the media looping.How do I set the source of a mediaelement in a mediatimeline to a relative URI?
View 1 RepliesI have a WPF 4 and VB.net 2010 project. I am playing videos in a single mediaelement. This is what I need to do:When the window first opens, I have the first video play just fine. However, it is after this video plays that I run into trouble figuring out how to do the following.I need the video source to change immediately following a single play through of any video, and I need this video (henceforth referred to as an "ambient" video) to loop forever.When a certain event happens, I need to change the video source again, have it play once through, and then go back to looping ambient video in step 1.Here is the rub, however. Many of the video triggers are inside of If-Then or Select Case statements in code behind, so I'm not exclusively using simple WPF events such as "MouseUp" or "MouseEnter".Also, all videos must play in the same mediaelement, for performance reasons.
View 2 RepliesI need the Logitech HD Webcam C310 to be preselected.When the Main Form opens the Webcam must be running allready, withoute having to select it from the Video Source Window.
View 1 RepliesI'm new in vb, I made a program that capture images from the webcam and I want to save as video file, the code i wrote give an Exception I want to know what is the wrong in this code, help please
HTML
'---capcaptureget function
Function capCaptureGetSetup(ByVal hWnd As Integer, ByVal s As Long, ByVal wSize As Integer)
capCaptureGetSetup = SendMessage(hWnd, WM_CAP_SET_SEQUENCE_SETUP, wSize, s)
End Function
[Code]...
Currently i am using wpf with vb ,vs2008,framework 3.5 ,there i am having code to connect with camera and capturing video.
Code :
If SendMessage(Me.hWnd, WM_CAP_DRIVER_CONNECT, 0, 0) <> 0
Then
'---set the preview scale---
[code]....
Here in this code while executing the bold ,italic marked line ,a dialog box appearing to select video source even if one option is there(i.e i have connected one camera to my pc through usb).Its coming in windows 7 not in xp ( Same code ). Is there any setting to stop this dialog box or to select the video source in code without showing the dialog box.
i am trying to find the param for a shockwave video within the web page source. The source looks like this:
[Code]....
I developed a winform application and I want to send the .exe file to someone else. That means that my datasource for my connection string is not the same any more
Dim da As OleDbDataAdapter
Dim dt As New DataSet
Dim objConnection As OleDbConnection = New OleDb.OleDbConnection
[Code]....
Like wise when u change the font the font changes by using fontdialog
[code]...
Re DataGridView Sorry don't really have any code - just a whole project. Basically I changed the underlying Access (accdb) Table by adding a new field, The new field shows up in the DataSources section of the Solution Explorer and in the "Edit DataSet with wizard" page but when I attach the binding source to a datagrid view, the new field is not there. I also created a new bindingsource but still not there.I just noticed I've another table where I changed the names to something more meaningful, and the old names are still there and the data for those fields doesn't display in the DataGridView
View 2 RepliesI am developing a video player with WPF.(in VB)I have already created a MediaElement ,ListBox, "Next" button, then start playing through reading ListBox,and use "Next" to skip to next audio/video.In "MediaEnded" event, i just copy all code in "Next" button.Now, problem is coming,
Assume the Listbox has four audios(.mp3), "test1.mp3", "test2.mp3", ......
now playing is "test1.mp3", i push "Next" button, then now playing is "test2.mp3".
However, when i just let "test1.mp3" play completed, my player will not play "test2.mp3",
[code].....
[edit]oops - stupid typo - this is resolved and explained in the next post[/edit] I've got a BINDING SOURCE - that I bind to controls - textboxes mostly. I create a row in the datatable behind this BINDING SOURCE like this.
[Code]...
I am a novice in programming and wrote several simple Windows Forms applications. I need to play mp3 file in Windows 7 x64 application.
Could you, please, explain in simple words, how to call MediaElement.Play() method from Windows Forms?
I have a vb.net project which i have inserted pictures and video. I inserted a video clip using the Windows Media Player control and it does work. The issue i have is that i can't move the program to another computer because the pathname for the video will be wrong. I know i could change the pathname when i move it but this is not practical because i need to present this program. Does anybody know how to make the video accessible no matter what location the program is at?
View 6 RepliesI am monitoring 12 video feeds from video cameras. Now I have more than 12 cameras, I have 134. But I will only monitor 12 cameras at a time. By Monitoring I mean, I have 12 small video screens on the form that I can see the video. The way I know which cameras are active, so I can monitor them is by a boolean value in a sql database. I run a Store Procedure in my program, and spit out the results in a XML file. I then read the XML file in a loop. This XML file will have a list of the camera names I need to monitor.
So that is for 12 video feeds. Now, I want to have a NEXT or FORWARD button on my monitor form. So when I click this it will give me the next group of cameras, 13 to 24. Now if I only have15 cameras that are active, that means the first group is 1 to 12, then the second group is 13 to 15 cameras. So I will only have 3 to monitor on the second grouping. One thought I had was to have another field in my table to mark as already as an active monitor, so when I run the SP, i will not select that row. But I need to select 12 at a time. Or I can make a number of xml files, one xml file for each grouping of 12, but I need to figure out how I can select the next group without re-selecting the first group. I have no code at the moment, I'm on my non-programming computer.
I creat audio video chat and when calling receivng video and client video is together...I want that client move his or her webcam video where want...as I know it name DROP&DRAP but I`m not know how to do it...
View 5 RepliesI was wondering if it was possible to have a program open Firefox, and have it open a bunch of tabs that all go to a link with a video, and then have it automatically play that video?
View 4 RepliesI would like to create thumbnails into a VB (2005 or 2010) form from video files.
I have a directory (in my hard drive) with video files (.mpg).
How to show video thumbnails for each video file?
My VB code (for images) is attached below and I want to convert it in order to manage video files.
Private Sub ThumbButton_Click(ByVal sender As System.Object, _
ByVal e As System.EventArgs) Handles ThumbButton.Click
Dim imagepath As String
[Code].....
i want to make a video streaming server or a Video Lan chat programe in VB.net
View 1 RepliesHow can i record a video via webcam in visual basic application and then display the video on user's request either live or recorded video.
how to develop video webcam recording application.
i want to buffer a video file on client side when it request.. what syantax i use to buffer the video the video in client's media player
View 1 Repliesis it possible to use avicap32 to capture video with a web cam and save the video as a wmv format instead of avi one
View 1 Repliescan play a SWF video but not a Flash Video?
View 14 RepliesI don't know what this is called so I've struggled to find an answer from google but I have a vague memory of it from t'old days.I've sub-classed (* see below) about 8 framework controls, overriden some properties and added some functionality into each one.The changes I have made are identical in every case. If I make a change, I have to go through each class and apply the same change there.I was hoping there may be a keyword such as <IncludeSourcefile "common.vb> that I can put into each class.
(* note) I use the term sub-classed but I don't know if that's the correct terminology. I've also seen it used for call-backs. Is sub-classed the correct term to use?
Way to space out the source code of a web page, having each tag on one line, without having to search for each tag ending and then making a new line after.
My code for obtaining the source code is:
CODE:
Also if anyone knows a way to colour the tags.
I'm searching for a way to change the font size of selected text in a RichTextBox (rtf) having different font families (e.g. Arial and MS SansSerif) and font styles (underline, bold...) using the FontDialog, but without changing the families and styles. The following code resets all the font attributes, which is not what I want:
[Code]...
I have an Access database and I want to view on a datagridview specific rows. For that I used the following :
CasesBindingSource.Filter =
"OfferDate Between #1/1/1997# And #12/31/1997#"
Cases is the table, OfferDate a field of the table wich is DateTime type.
When I use Between operator I get the following error :The expression contains unsupported operator 'Between'.
I want my form to navaigate into a link then open up the source code of that page it navigated to . Then get a link from the source code then display it on a textbox .Here's an example : i want this link in a source code :
http%3A%2F%2Fanime-omnibus.ning.com%2Fvideo%2Fvideo%2FshowPlayerConfig%3Fid%3D3382149%253AVideo%253A160429%26ck%3D-
This link is located just beside :
config=
That is:
config=http%3A%2F%2Fanime-omnibus.ning.com%2Fvideo%2Fvideo%2FshowPlayerConfig%3Fid%3D3382149%253AVideo%253A160429%26ck%3D-
How can i make my form to navigate into the source code and get the link beside config word . I know it is possible to do it , just don't know the function to do it .
I refreshed my data sources to include additional items from the SQL Server databases and it appears that my entire data source from my VB.NET project disappeared.I am using Entity Framework. I may have clicked on something wrong, not quite sure. Unfortunately I can't recreate the Data Source without creating a new Entity and Data Model.I can delete the entry in the App.Config file and recreated it, however things aren't quite right.Is there a way that I can recreate my Data Source from the entry that is in my App.Config file...since that appears to have remained intact.BTW, I can go to my Data Model and successfully refresh from there, however my project isn't connecting to the database so I have quite a number of errors until I can get reconnected.
View 4 RepliesHow do I convert a VB4 source code to VB10 source code?
View 3 Replies