1. When I insert an icon in my VB.NET form, for example: a small shield icon, a white box appears around it and it's very annoying and ugly! I want to disappear the white box at the back of my .ico image.
2. This white backgroud not only appears on .ico files, but also on normal image files like .png, .jpg, .bmp.
i trying to do a file upload, i want to image to save to image folder, however, the image don't know appear in the directory that i indicate if i click on "show all file", the image appear, but the image icon is blank or white like the image below show so i click on that image and click on "include it in the project", however, it shouldnt be the case that i everytime upload an image,i need to redo that again so how should i allow don't appear the white icon and to always appear in the upload folder when i upload a image instead of manually click on the image to include in ? is it visual studio problem? does i need to click on something to make the white icon disappear? [code]
I use vb.net. I am trying to do a file upload, I want the image to save to image folder, however, the image don't know appear in the directory that I indicate. If I click on "show all file", the image appear, but the image icon is blank or white like the image below show. So I click on that image and click on "include it in the project", however, it shouldn't be the case that I everytime upload an image, I need to redo that again. So how should I allow don't appear the white icon and to always appear in the upload folder when I upload a image instead of manually click on the image to include in?
This is my code Protected Sub uploadImage() Dim filename As String = FileUploadImg.FileName Dim fileType As String = filename.Substring(filename.Length - 4).ToLower() If (fileType = ".gif") Or (fileType = ".jpg") Or (fileType = ".png") Then [Code] .....
i trying to do a file upload, i want to image to save to image folder, however, the image don't know appear in the directory that i indicate if i click on "show all file", the image appear, but the image icon is blank or white like the image below show so i click on that image and click on "include it in the project" , however, it shouldnt be the case that i everytime upload an image, i need to redo that again so how should i allow don't appear the white icon and to always appear in the upload folder when i upload a image instead of manually click on the image to include in ?is it visual studio problem? does i need to click on something to make the white icon disappear?
this is my code
Protected Sub uploadImage() Dim filename As String = FileUploadImg.FileName Dim fileType As String = filename.Substring(filename.Length - 4).ToLower()
That mostly says it, I don't know much more to add. (-: The background is some random red after the execution of a sub routine. I then would like to have the backcolor dissolve from what ever value of red is present to a full white in about 1 second without showing other colors.(Unless it looks really neat...) Red could be anywhere from RGB(0,?,?) to RGB(255,?,?) when it starts to dissolve. Obviously the closer to 255 would make a smaller amount to change. However, I could be just as happy to see it go from RGB(150, to RGB(255, ?, ?) to get it started. The foreground is black numbers.
must stop the user from proceeding if the textbox is null,if the textbox has only spaces in it.i tried . trim but that doesnot work, still spaces are excapted as valid characters.
I am using VB.net (FormView and ObjectDataSource) and Sql Server 2005.
I want to get last inserted @@identity in table on FormView1_ItemInserted
Protected Sub FormView1_ItemInserted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.FormViewInsertedEventArgs) Handles FormView1.ItemInserted
End Sub My issue is that I want to redirect my FormView to readonly mode after FormView1_ItemInserted but for that I need to show the inserted record in readonly mode and that is only possible if I get my last inserted @@identity.
I currently have the following code but I would like to get away from going to a physical location. If I have the icon as a resource, how can I programatically add the icon? I don't want to use the form's designer to do this.
Sub Form1_Load() Dim ico As New System.Drawing.Icon("C:Resourcesicon.ico") Me.Icon = ico End Sub
My application icon looks ugly-like a paper and i would like to change it to something like globe icon or any suitable image.Am programming using visual studio 2005 and the program is written in vb.net.
I'm not sure exactly if the folder icon is in shell32.dll, but nonetheless if it is.Basically, whenever I come across a folder in a FileSystem list, I want to add the icon for a folder to the image list that I am using for the ListView. The problem is that I'm not sure how to reference a specific icon location in a icon collection in a dll.Is this possible with Icon.ExtractAssociatedIcon and shell32.dll?
Got an annoying issue it's Visual Basic 2010 I changed icon where the assembly name.I got a good icon it has lots of sizes, or I tried diff sizes like 64x64 128x128 nothing seems to work I only see the icon when i do View > Details so it's small icons in the folder, but if i have view large icons It doesn't work. I even used the same icon on VS 2008 and it worked.
Here's the code that I use to extract the icon size that I want:
Dim i As Icon = My.Resources.Spectrum Using i2 As New Icon(i, New Size(256, 256)) Me.PictureBox1.Image = i2.ToBitmap End Using
This works from 16x16 up to 128x128 but for 256x256 it extracts the 128x128 icon. I tried 0x0, because I seem to remember that that is how the large size is stored in the meta data, but that didn't work either.
I'm attempting to remake the Explorer to customize it some more. I know how to get Name, FileSize ect. Getting the Icon is hard though. [Code] The code i'm using to Insert the Icon into a image, i'm getting this error: Error1Value of type 'System. Drawing.Icon' cannot be converted to 'System.Drawing.Image'
i'm getting this really strange error, or I must be overlooking something obvious. I'm using the following piece of code:Dim hwnd As Integer = GetWindow(GetDesktopWindow, GW_ CHILD) Dim myicon.As System.Drawing.Icon =Icon.FromHandle(hwnd)PictureBox1.Image =myicon.ToBitmap
Why is it that the icon of my form appears only when I am running it in my IDE. When I publish my program and running it in Windows, the icon does not appear at the taskbar, what appears is a default icon instead.
I've just changed the Icon for my application in the project->Properties->Application tab. However when running it's still the old (small) icon in the taskbar. How is this changed?
I have an issue with the icon displayed on the desktop. I have used the project's properties, application form and used the dropdown menu under icon to associate an Icon to the application. I have done this loads of times before and it has always worked.
Dim iconloci As String = located Dim iconindex As String = iconloci.LastIndexOf(" exename: ") iconloci = iconloci.Remove(iconindex) Dim theicon As Image
[code].....
It works perfectly for files on the local system. But i need it to also grab icons from exe files in network locations(\\example-pc\example). Vb net just throws an error when trying....The error:QuoteValue of "\\examaple-pc\example-folder\example-file.exe" is not valid for 'filepath'.
Im trying to make the an icon for the form work with my own icon, because all programs have their own(like ie hat the e and paint.net has their logo), but whenever I put in my icon phote(and it is saved as .Ico) it comes up with the error: Argument 'picture' must be a picture that can be used as an icon. I have the same measurments as the defult one(32 by 32) so what am i doing wrong?
I am using query from a SQLite database as the AutocompleteCustomSource for a ComboBox. Also, I want to load data in separate thread. My LoadData method works fine when called directly, but it fails when it is called from the BackgroundWorker thread. When it is called from the background thread, it throws a Specified cast is not valid exception on the csearch.AutoCompleteCustomSource.Add(hh("Taj")) line. Below is my code:
Sub LoadData() Dim connetionString As String Dim cnn As SQLiteConnection
I have a vb.net 2008 application which has its corresponding icon. The icon shows correctly except in the taskbar when the "small icon" setting is on.
My vb.net project includes a .ico file which when I see in the IDE includes 16x16, 32x32, 48x48, 64x64 and 256x256 bitmaps, in 4, 24 and 32 bits, also 3 .png images in 256x256 32 bits each.
I made the icon myself simply using a 64x64 bitmap and then converting it to .ico, and assigning it to the application in the project properties. I thought windows would use and escalate the corresponding image, it shows even in the file explorer properly in the small icon form, but not in the taskbar.
I am writing an application that will cache all my files and then let me display files that I would like to display. I am wanting to extract the icons from each file as I cache them.My question is this: How can I detect if the icon from one file is the same as another icon and therefore prevent me from extracting it twice?
Ive found plenty of examples of extracting an icon from a dll, but then those examples display the icon as an image, which is not what Im trying to do. Im trying to extract those icons dynamically into my program to set the application icon, and other icons for items on the menu bar. I have this little bit of code, but I keep getting various errors when I use it.
In XP when you go to shut down, windows fades to black and white. I think that's a nice effect.How would i go about fading a color image (image box stretched - like a screen saver) to black and white...?
Has this ever been done? Is their a code snippet that already exsists?