Writing Text Lines To A File / Removing Trailing Zero's
Mar 24, 2010I am using the following code to write lines to a file. I seem to get Zero's after my text.Any suggestions to get the trailing zeros out of my text file? [code]
View 2 RepliesI am using the following code to write lines to a file. I seem to get Zero's after my text.Any suggestions to get the trailing zeros out of my text file? [code]
View 2 RepliesI am in the process of developing a VB.net helper application that will combine two text files into one, remove the extra blank lines, do some calculations and spit out a new and improved text file.
My question is: at the beginning of each file is a header row that starts with a "01". How does one go about removing all of the other "01" rows but leave the first header line?
So far, I have succeeded at removing all of the "01" lines, which isn't what I want but hey, I got it to work
I am using streamreader to read and streamwriter to write, I have put the lines into an array
[text file contents]
Remove [ ] *****************
-----
;this is -----
------
;this is another -----
[end of example file]
I want to remove the lines that start with "****" and keep deleting lines until i reach ";" I thought this would be simple but im missing something and I don't want to put this array into a listbox it is being writen to a text file.
I'm writing a program where there are text boxes and the user can enter info and append them to a text file as well as read from the text file and view the various entries in it. The problems I'm running into are that I have a button that opens an open file dialog box allowing you to select the file, and I want to get it to open the first entry of that file in the correct text boxes. the code so far looks like this
code:
I used to have this bit of code in there but there was a conflict with the .txt file being used more than once at the same time while it was in there.
code:
Im also having trouble writing to the file and I'm not sure why. I have an "Append" button that has this code in it
code:
and it comes up with the issue "object reference not set to to an object instance".
I want to create a little program with textboxes in it, that writes the contents of these textboxes to a file. It also needs to write some predefined lines to the files, even on the same line as where the contents of the textbox is.
Heres an example:
The file should look like this when you open it in notepad:
^1::
Send t Text from TextBox {Enter}
First I think I would need to do this:
Dim ioFile As New StreamWriter("scripting.ahk")
ioFile.WriteLine("^1::")
If I do the above it works.. But how can I write another line where the "Send t" and "{Enter}" gets written automaticly before and after the contents from the Textbox?
I'm trying to create a program that stores a users stats for their character (for something like an RPG). I know how to write more than one line in a text file, but I want to learn how to read and write text on specific lines of my file. I know that you can just read each new line individually in order using a StreamReader, such as
username.text = readLine.ReadLine()
userage.text = readline.ReadLine()
[Code]....
This is good for just displaying the stats and changing them from a constant interface, but I'm afraid that eventually I'll need to read/write specific lines, like reading the fourth line which might specify magic level, or writing a new money amount.
I am using the follow code to obtain source code from my site:
Dim downloader1 As New Net.WebClient
Dim source1 As String = downloader.DownloadString("[URL]")
But there is code in the file which I am loading, something like:
<!-- load time: 0,05ms -->
<!-- Queries: 25 -->
But I want to remove all the <!-- --> lines from source1.
so I want to make a button in one of my programs that writes text to a file. I know how to do that part. I use:
[Code]...
I have written a simple script to get a bunch of lines from a text file (they will be filenames eventually) which are split by new lines and puts each one into an array..
Dim ary() As String
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If My.Computer.FileSystem.FileExists("C:MenuFiles.txt") Then
[code]....
The only thing I can do for now is either use the substring function to remove the first character from all array values after 0 but I don't like that because it's messy and what if the split "works" as I want it to one one of the lines and knocks of the first character when I don't want it to.
I have a text file containing lines of data (File 1). I need to delete all the lines in another text file (File 2), which are found in file 1.So I could read file 2 line by line. And then once the line has been read, read file 1 line by line to search for a match. But that's going to be painfully slow.Or I could read file 2 into memory. And then read file 1 line by line and REPLACE the lines in file 2 with nothing, therefore deleting them. File 2 could be 100 mb, so I'm not sure about reading it all into memory.
View 16 RepliesIs is it possible to add trailing text after the checkbox for a Datagridview CheckBoxColumn?
The situation is like this. Say the DataGridView shows name of employees from datatable. The user can select employees from the displayed list in the DGV. For the selection, I inserted a checkboxcolumn into the datagrid. Everything OK.
But just want to know whether it is possible to merge the two column into 1, so that the check box precedes the name of the employee in the same cell rather than in a different column.
i have 5 textboxes in a form. I have a streamwriter that writes all of their text to on text file like this:
Code:
Dim xfile As String = Application.StartupPath & "/Set.txt"
If File.Exists(xfile) = True Then
Dim writex As StreamWriter = New StreamWriter(xfile)
[code]....
I was wondering how to get the text under the each number and place it in the corresponding textbox.
I'm really stuck on something, which, is probably easy, but I've blown hours trying to figure this out.I need to be able to remove 1 line from a textfile. I will always know exactly what line it is, as, it's the same "string" as a variable. So if my variable is called "removeThis" then I need to be able to Read through the textfile, find the line that is equal to the removeThis string variable, and then rewrite the whole textfile.
View 3 RepliesI am trying to remove all whitespace from a text file and store each character into an array. Is there any way to combine all the lines together without leaving any whitespace? I tried the .replace method but it only removes whitespace for each line. It currently shows like that, but I want it to be 1 whole block of text without whitepace in every line:
[Code]...
I have been working on this for quite some time now. I have a listbox that loads the names from a .txt file. When the user selects names I need it to delete the items from the list. I have the code to remove it from the listbox, but when I reload the form it puts them back in because it's reading the file.
View 2 RepliesI know this has been asked like a million times, but I cannot seem to find a solution that works for me. I have a text file..and lets say its named Test.txt.I have like a list of stuff in the file and I have a Remove button. I also have a listbox that has the contents in the Test.txt file listed on the form_load. So basically to try to explain this better..what I want is to delete the line that is selected in the listbox when I click the remove button. Let me explain in an example.The Test.txt has the same contents as the Listbox..so say my list is like this:
Hi
How
Are
You
If I have Hi as my Listbox.SelectedItem then I would like to remove that line from the Test.txt. I tried to load the contents of the file in a TextBox too and I can search and find the text in the textbox and focus on it and highlight it but I cannot delete it from there too.
I am attempting to get my program to store its, in this case, a Url list in a text file. This should be relatively simple and so far it has been, writing to the document has been easy and it has all worked well, however, I have been trying to get my program to remove a url from this list too. To achieve this I have created a temporary text file, named 'FavouritesTemp.txt' and write the content of a listbox (with the target of the delete command removed from it) and then replace the old text document with the new one. But I keep getting an error from this - saying that a process is already accessing this file, even though I have just created it! I have attached a picture of my error and the code I am using underneath.
Code:
System.IO.File.Create(My.Settings.ProgramInfoStorePath & "FavouritesTemp.txt")
MsgBox("Created FavouritesTemp.txt")
Dim FavouritesWriter As New System.IO.StreamWriter(My.Settings.ProgramInfoStorePath & "FavouritesTemp.txt", True)
For Each Item In FavouritesListBox.Items
[Code] .....
I have a multiline textbox where I sometimes get the first and last line of data that is blank.
This is my code that populates the textbox:
txtOutput.Lines = lines.ToArray How can I remove these blank rows?
I'm trying to have a program remove lines from a text file if they start with a certain string. I haven't had much luck with this over the past couple of days so I thought I'd try and get some advice.
This is the code that I've tried most recently, and makes some sense to me, but gives a "A first chance exception of type 'System.ArgumentOutOfRangeException' occurred in mscorlib.dll" error:
Dim SourcePath As String = "C: est.txt"
Dim fileLines As List(Of String)
fileLines = New List(Of String)(File.ReadAllLines(SourcePath))
[Code].....
I am reading a list of IP's from a text file. After every procedure, the first IP (the first line) needs to be removed, and the new first IP will be read at the beginning of the next procedure. Basically, I just need to know how to get rid of the first line of a text file completely. For example, I'd like to go from this:
1.1.1.1:80
2.2.2.2:80
3.3.3.3:80
[code]....
I am writing an app that writes notes, inserted by the user, to a txt file. The app saves that notes to a txt file, and when opening it reads the file and shows the already inserted notes. However, I want the user to be able to delete some of those notes...but I can't seem to do it...this is what I have:
VB
Dim file As New FileStream(data_path & "notes.txt", FileMode.Open)
Dim text As String = Nothing
Dim reader As New StreamReader(file)
[Code]....
It goes fine, but the text.Replace(value, "") line doesn't seem to work. I've also tried text.Remove(0) but it doesn't removes the line...it looks like it has no effect.
What I am trying to do is remove lines of a multiline TextBox based on certain criteria, such as the number of characters or words. For example, if I paste a list of phrases into the TextBox, I want to remove all phrases that contain more than 25 characters. Once the phrases are removed, I then want to remove the empty lines that are left behind, but I have commented out the ".Replace(vbCrLf & vbCrLf, vbCrLf)" for the sake of making the results easier to follow (see screenshot from Excel below, which includes a blank cell wherever a phrase has been removed).
Here is my
Private Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
Dim lines() As String = TextBox1.Text.Split(vbCrLf)
[Code]....
Why is it not "blanking" the entire line in ALL cases where the line contains more than 25 characters?
I have an Excel file that downloads automatically, but for some reason the binary XLS file contains some garbage HTML text at the end of it.
When opening the file in the Excel application, it shows a warning but proceeding will automatically remove the garbage HTML text.
However, I need to open the file programmatically. When doing so via
Dim wb As Workbook = Excel.Workbooks.Open(ExcelFileName)
It throws:
Exception from HRESULT: 0x800A03EC
a) Get Excel to perform a similar action as if I manually opened it and remove the garbage HTML automatically. NOTE: Tried setting the XlCorruptLoad.xlRepairFile parameter and it didn't work.
OR
b) Remove the garbage text from the XLS binary file (FileStream?) and resave it before attempting to open the file with the code mentioned above.
The garbage html always comes at the very end of the file and starts with
I'm trying to remove a line from a text file that begins with a set value.
The idea would be to paste values into a Windows form, which then finds each line that begins with that value (a 5 digit number) and removes those lines from the file, and then removes the gaps.
Write a program that requests a color as input in a text box and then determines whether or not the color is in the text file. The program should use the Boolean-valued Function procedure IsCrayola that returns the value True if the color in the text box is a Crayola color.
*I am to use a file named Colors.txt
Ive got my text file all setup, how can i remove certain text from the file.i got text in there that basically says what the line is in relation to, and i want to remove that bit of text.theres about 8 lines,
textline reads as
subj = First Aid
Ques no 1
[code].....
I a very large text document, I need to read some lines and at the end of each line, insert a text from the header of each page to he preceding lines.I have the following code the reads the file and displays it on a list box.Public Class Dialogs..[code]
View 2 RepliesI know that Deleting a specific line in a sequential text file is impossible but instead copy the needed lines and not copying the unneeded ones to an output file .. killing the old one and renaming the new one with the same.. I can't make this step...
That is my record file
Code:
Input #1, CustomerName, CustomerHomeAddress, CustomerBussAddress, CustomerTel1, CustomerMob1, CustomerID, DateRent, CarRegPin
Code:
"Josek Sam","68 West Land Street","149 Union of States","4524563","45635463","JOSKSAM1",#2009-03-02#,"MILANCGLZ2008"
"Josef Malm","142 Unions Street","64 Hamersters Street","452504","42542054","JOSFMALM2",#2009-03-06#,"MILANCGLZ2008"
"Dave Green","131 Oxford Street","96 BlueBane Route","452542452","43254345","DAVGRN3",#2009-03-07#,"MILANCGLZ2008"
I made a form that when you put your CustomerID in Text3 Box.. it access the records and make some calculations. now.. The customer will return the car.. Then his data should be deleted.. I want to know how to make that when I enter the CustomerID and press on the Command button .. It copies the other lines to a new output folder and doesn't copy these ... So it appears to be deleted using this way..
This is my first post in the community. I am putting together a program that serves two functions:1. Takes input from TextBoxes and writes it to a text file.2. Takes the text from the text file and displays two specific strings of text in a MessageBox.This is the code for the button that writes the input to file.
Private Sub facSubmitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles facSubmitButton.Click
Dim facultyRecord As String = "C:\Documents and Settings\All Users\Desktop\teeny.txt"
[code].....
i have a text file containing following data(it is a config file for another program):
[pos]
100
[lastsave]
[code].....