In my windows application I am using Mscomm32.ocx control for serial communication.
I set the control properties like below in the Form1_Load event.
AxMSComm1.CommPort = 1
AxMSComm1.Settings = "9600,N,8,1"
AxMSComm1.InputLen = 0
[Code]....
In my application I am using MSComm32.ocx control for the purpose of serial port communication.
when i am using it I am getting a following error while writing data to the port.
"AxMSComm1.Output {"Exception from HRESULT: 0x800A018A (CTL_E_GETNOTSUPPORTED)"} Object "
I am writing the output to the port like below. AxMSComm1.Output ="Hello"
I mention the properties of the ocx control in the form load like below. AxMSComm1.CommPort = 1
AxMSComm1.Settings ="9600,N,8,1"
AxMSComm1.InputLen = 0
AxMSComm1.PortOpen =True
I searched for this error in the net.But I am not found any information for this issue.
can anybody explain why I am getting that error and how to resolve it???
I'm writing some VB2008 code to control four 7-seg LEDs I bought from Velleman. They came with some example code in VB 5.0, and with instructions telling me to input 5 bytes at a time in the format Chr$() & Chr$() & etc. for the rest of the 5 bytes. When I try to do this using VB2008, it rejects the $ sign, so I've tried it using the Chr() format, which VB2008 allows. However, it doesn't work. Is Chr() the new version of Chr$() or are they different entities? In sending data to the LEDs, I'm using LiveComPort.WriteLine() as my command. (My serial port is called LiveComPort) I also tried it with LiveComPort.Write() asthe command. I know that my serial port and the LEDs are working, because they respond to the demo program provided by Velleman.
View 7 RepliesA while ago I wrote a library which helps me simply text operations, serial communications, PLC interaction using OPC Automation, etc... My problem is with the vb6 serial control mscomm32.ocx. In my computer, I can use it with no problem. Everything works fine when testing serial control and my forms can open sucessfully. When I try to run a winform that uses Serial library (mscomm32.ocx) in a computer that doesn't have VB6 installed, I get the error "Common Language Runtime Debugging Services. Application has generated an exception that could not be handled. PRocess id=0xe0 (224). Thread id= 0x6f4 (1780)"
[Code]...
I'm trying to connect to a Mettler Toledo Scale via a serial port to read in the weight of an object and output the wieght into a label or text box on the form.so I have a button and a text box. Here is my code
Private Sub btnSendText_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSendText.Click
Dim Port As SerialPort = New SerialPort("COM1", 9600, Parity.None, 8, StopBits.One)
Port.Open()
[code]....
My problem is that the program hangs there doing nothing when I click the button.
I'm having problem while writing data to serial port. This piece of code is meant to write all the integer numbers in a text file to the SerialPort (connected to a USB-Serial Converter) when StartButton is clicked. However, it only managed to send two numbers and stopped at "USBSerialPort.Write(t, 0, 2)".
Private Sub StartButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles StartButton.Click
USBSerialPort.DiscardOutBuffer()
[Coe].....
reading and writing data to a serial port. the settings for the port are correct (from manual of device):
[Code]...
I want to communicate Weigh bridge with my ORACLE Form serially. I have already import MSCOMM32.OCX in my Project and On Button Pressed I wrote a Program to Start Communication between Weigh Bridge and my form. I was stuck at GET_NUM_PROPERTY of MSCOMM32.OCX Package.
View 1 Repliesi am a absolute beginner and i want to use vb to receive data from micro controller through serial port using rs232 standards, i found this code to receive the data serially, can any one tell me where should i paste this code, so that the data received will be displayed in message box.Private Sub DataReceived(ByVal sender As System.Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) HandlesSerialPort1.DataReceived
[Code]...
The link below has code to connect to a modem thru the serial port but it is for an earlier version of VB. when I convert the code, it does not fully convert and has 4 errors that prevent building the project. can someone tell me what needs to be changed or added?
[URL]
Note: the error: not CLS-Compliant
i trying to make a control for serial port to send a string "1" to serial port , but i don't want to use a form. I want to be able to save as .ost file or be able to input it into outlook 2003 macro to use as a script. can someone get me started on how to name, open, set, write to a serial port without using a form? just to use as a macro?
View 2 RepliesAll these days i used to program in Vb6.0. Now since from last 15 days I have been using Vb2008. In Vb6.0 I used MSCOMM for serial communications. Here in Vb2008 I found Serial port control equivalent to it. I somehow managed to learn how to send data using serial port control and set parameters like baudrate , stopbits , etc. But I' not getting how to get the received data. In VB 6.0 we used to use comEvReceive in OnComm event and used MSCOM1.Input to get the received data. But I'm not getting how to do the same in vb2008.
View 2 RepliesI just need to write data to serial port to control a toy car
Moving left, right, forward, back.
I am trying to send a control string from VB.NET to a serial port. I am using a pololu trex jr. on the receiving end of the serial port. I have attached a copy of my current code which compiles without errors, but fails to send data. I can tell that it is not sending data because I have a light on the control board connected to the port and it normally blinks when data is received. The program that came with the board drives it perfectly but does not serve the purpose I need it to. I am open to any suggestions as I eventually plan to write a class to contain the control routines.
View 12 RepliesI have created a laser that can be controlled via the serial port. I've written the code to switch it on/off and it works fine. How do i make it strobe? Here's the code to switch it on, to switch it off is similar (don't ask why it is like this...i think it's the transistor from the circuit board that switches the signal):
[Code]...
I'm working on a project where I need to trigger an event when a switch is closed. It is my understanding that it is possible to use the control lines on a serial port and read whether the switch is closed or not. I've found a schematic of how to connect the switches to the pins, but I have not been able to find any example code on how you can read the state of the switches.
View 2 RepliesI have a stand alone VB.Net 2005 application that uses a serial port that generally stays open while the application runs on a Windows XP system. In trying to bullet-proof the UI, I ran into a problem when the USB to Serial Converter normally used to provide the serial port is disconnected while the serial port is open. In trying to handle the resulting error when accessing the port, I find I cannot close the port.
When trying to do so, the error message says something like "unable to close the port. You may not have sufficient permissions." Reconnecting the USB/Serial Converter does not reactivate the port.
[Code]...
I'm mohammed from Oman ,I'm visual studio.net programmer How I can Read the Data From Barcode Weight scales By Serial port and TcpIp port
View 7 RepliesI have a Windows form.in windows form have a combo box that give me a list of available port serial with it code (Dim ports As String() =SerialPort.GetPortNames())for example( Com1,Com8,Com15,...).but I want to give me fullname of serial port in device manager for example in dvice manager is these (Comunication Port(COM1) - Printer Port(LPT1) And USB Serial Port(COM8)).how to Get it?
View 2 RepliesIf I uninstall the COM1 and reboot, it works. If I shut down (power off) and restart, I get the message below. If I uninstall then click on Scan for Hardware Changes,The given port name does not start with COM/com or does not resolve to a valid serial port. Parameter name:portName
View 8 RepliesIm having problem with the Serial Port. When i run my program, "Access to the port 'COM1' is denied". What does that mean? Im not sure whats happening because theres no error in my code. Someone suggest me to use 'COM2'. Which is also the same result. I have a microcontroller, programmed and run it. And i need to capture the data onto my vb, which is on a multiline textbox. How to i do that?Just to double check my code?
[code]...
I am trying to buld a DLL in VB.NET 2010 that will be use to control a vending machine.Whin a call into the DLL to a function to open and setup the comport the first time its opens it just fine, but if a call into the DLL again it does not know that the port is open even if it is still open. I can check with another program and is shows the port is open and if I try to call into the DLL again to open the port I get an error that the port is already open. Any idea how to set this up so it will work
View 7 Repliesi'm creating a windows form to send/receive data to/from serial port.At first : i send the data as string to the serial port .Second: i tried to read the string again for test the successfull transmission , but i recieved empty string
[Code]...
I can find documentation (preferably with code samples) that will guide me through all the steps to activate and read from a serial port?
View 6 RepliesFor my application a need to set a breakstate on/off of 25ms.In Xp this runs fine when I set breakstate=true and wait for 25ms and then breakstate= false and wait 25ms.In CE6.0 when I set breakstate = true, it only throws a puls.It is even not possible to keep breakstate on.
how to solve this or is there an alternative to simulate a breakstate?
can we communicate to Serial port COM1 through Microsoft Robotic Studio?We are developing wireless robot which will take data from serial por
View 14 RepliesFor many years, I have sent data between 2 computers using serial ports."Here is the data", "Thank you for that data!" type stuff.Where do I get more information for doing the same thing with 2 computers that are networked together? Assume a local ethernet connection.I have experimented with serial-ethernet modems and that works well but I don't want any more hardware.Is there a good thread here I should read?I want 2 VB programs running and I want to exchange data periodically.
View 2 RepliesI know things have changed in VB2005.net and i have Express and i want to controll the serial port. I have a program from VB6 that i understand and i tried to convert it but i get alot of errors and i have know idead what they mean. As you can tell i haven't been programming very long.
If someone can point me in the right direction for programming the serial port in VB2005 .net i would appreciate it or tell me what differences there may be.
I am developing a UI for an embedded device that I have designed and built. The device uses an FT232 chip which, when connected via USB is automatically assigned one of the COM ports. I was wondering if there is a way to set up a loop which would automatically detect which COM port the device has been assigned. I could then add some handshaking to verify that the port is correct.
View 4 RepliesI have a little code for get the serial port available in the system.
For Each pn As String In IO.Ports.SerialPort.GetPortNames
Debug.WriteLine("NAME : " + pn.ToString)
Next
[Code]....
So, The PORT1 and PORT5 its ok (because this are real serial port, with a real RS232 interface), but PORT4, I don't know.
How I can do for get only true serial ports ?