The link below has code to connect to a modem thru the serial port but it is for an earlier version of VB. when I convert the code, it does not fully convert and has 4 errors that prevent building the project. can someone tell me what needs to be changed or added?
[URL]
Note: the error: not CLS-Compliant
I have spend about a week trying to get data from this radio set through a modem and a serial port. The data is transmitted by the transmitter in 5-databits at baud rate of 50. An existing vb 6.0 program in windows 98 receives the data correctly with port settings of Speed = 50, Databit = 5, Parity = none and Stop bit = one. The data is received at every 9 sec, presumably with the help of a timer. I have to write a program in .net frame work 2.0 to get the same data. My problems are:
1. The program hangs when I execute SerialPort1. ReadLine().Trim or SerialPort1.ReadExisting
2. When I collect SerialPort buffer after every 9Sec, and try to get the strings out of each byte using following code, I get only repeated squares instead of characters.
[Code]....
i am a absolute beginner and i want to use vb to receive data from micro controller through serial port using rs232 standards, i found this code to receive the data serially, can any one tell me where should i paste this code, so that the data received will be displayed in message box.Private Sub DataReceived(ByVal sender As System.Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) HandlesSerialPort1.DataReceived
[Code]...
I have a VB.net app running on one computer, displaying text into 2 texboxes or labels.I need to see the two values in two sperate textboxes or labels from the two labels on another computer via a null modem serial adapter.
1st computer.
Code:
serialport1.writeline(label1.txt)
straight forward right?
2nd computer to read the data
Code:
Private Sub SerialPort1_DataReceived(ByVal sender As Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) Handles SerialPort1.DataReceived
dim s as new string = serialport1.readline()
label1.text = s
This is what I was thinking;
Code:
serialport.writeline(label1.text & label2.text
This would send the two values over the serial port. How would I seperate the two values and display them in two different texboxes?cannot use them together)Am I on the right path at all? Or using the serialport.writeline method won't work at all....
I am wondering is there any code to get the text reply from the modem? I am using the itegno W3800 modem. I have used the below method so far but apparently VB.NET windows form doesnt see the incoming data. The message box comes out empty. But when i try the same method with the TMAS Siemens GSM modem, VB.NET can see the incoming data and display out the data string.
here is the code that i have written:
serialPort.Write("AT" & vbCrLf) 'set command message format to text mode(1)
receiveddata = serialPort.ReadExisting()
it works for the TMAS gsm modem.
The baud rate for the TMAS GSM modem is 9600 and the baud rate for the itegno modem is 115200.
For the itegno modem, the data is sort of like stuck at the serial port as after every time i pressed on the button for example "AT"
this "AT" command gets "stuck" at the serialport and run only when i have connected through the serial port in hyper terminal.
I am thinking is it the baud rate for 115200 is too fast for VB to handle? And also is there any way to solve this problem?
i have to revert back to the itegno modem for use for my project at the end of the day.
I want to connect to serial port and get the data from that using vb.net how to do this.........
i have found one sample and i tried that but in that datareceived event is not firing
I'm trying to connect to an external device using a serial port. I found a couple of tutorials with demo code and tried these. Unfortunately they all return the same gibberish unreadible result.[code]I'm sure my port settings are correct (I have the communication protocol of the device.)
View 20 RepliesI'm trying design an aplication, who receive inputs from a Photocell omron.
I will connect this photocell at serial port, and it, when detect movement, close the circuit.
How can I verifi in the serial port, if the circuit is closed ou opened?
I have a stand alone VB.Net 2005 application that uses a serial port that generally stays open while the application runs on a Windows XP system. In trying to bullet-proof the UI, I ran into a problem when the USB to Serial Converter normally used to provide the serial port is disconnected while the serial port is open. In trying to handle the resulting error when accessing the port, I find I cannot close the port.
When trying to do so, the error message says something like "unable to close the port. You may not have sufficient permissions." Reconnecting the USB/Serial Converter does not reactivate the port.
[Code]...
I'm mohammed from Oman ,I'm visual studio.net programmer How I can Read the Data From Barcode Weight scales By Serial port and TcpIp port
View 7 RepliesI have a Windows form.in windows form have a combo box that give me a list of available port serial with it code (Dim ports As String() =SerialPort.GetPortNames())for example( Com1,Com8,Com15,...).but I want to give me fullname of serial port in device manager for example in dvice manager is these (Comunication Port(COM1) - Printer Port(LPT1) And USB Serial Port(COM8)).how to Get it?
View 2 RepliesIf I uninstall the COM1 and reboot, it works. If I shut down (power off) and restart, I get the message below. If I uninstall then click on Scan for Hardware Changes,The given port name does not start with COM/com or does not resolve to a valid serial port. Parameter name:portName
View 8 RepliesPublic Class my_class Dim WithEvents COMPort As New System.IO.Ports.SerialPort
Public Sub FindReader()
Dim ports As String() = IO.Ports.SerialPort.GetPortNames()
Dim port As String
For Each port In ports
[Code3]...
When it runs, it shows a single COM port "COM1". I am assured that the device attached to it is a standard 8,n,1 and uses 9,600 baud. The exception is "Acess to the port 'COM1' is denied".
I need code to read a serial port state in which I have 2 buttons attached to some configuration on pins 1-9. The program will then, when one of the buttons are pushed, right arrow or left arrow as a keyboard command.
View 2 RepliesThe vb.net code is functioning correctly as it talks to a device through COM1 serial port.What I was hoping was the equivalent c# code is not creating the same string and as a result, the serial 'packet' is not correct. Check this illustration of my problem [URL]...
My goal is to eliminate the addition of the extra characters '/0' and '/b' that what I hoped was the c# equivalent to the correctly functioning vb.net code. It just occurred to me I should change the code to employ Stringbuilder. The 'packetbuilder' method/function builds a string and keeps concatenating things to itself.
[Code]...
Im having problem with the Serial Port. When i run my program, "Access to the port 'COM1' is denied". What does that mean? Im not sure whats happening because theres no error in my code. Someone suggest me to use 'COM2'. Which is also the same result. I have a microcontroller, programmed and run it. And i need to capture the data onto my vb, which is on a multiline textbox. How to i do that?Just to double check my code?
[code]...
I am trying to buld a DLL in VB.NET 2010 that will be use to control a vending machine.Whin a call into the DLL to a function to open and setup the comport the first time its opens it just fine, but if a call into the DLL again it does not know that the port is open even if it is still open. I can check with another program and is shows the port is open and if I try to call into the DLL again to open the port I get an error that the port is already open. Any idea how to set this up so it will work
View 7 RepliesI'm writing some VB2008 code to control four 7-seg LEDs I bought from Velleman. They came with some example code in VB 5.0, and with instructions telling me to input 5 bytes at a time in the format Chr$() & Chr$() & etc. for the rest of the 5 bytes. When I try to do this using VB2008, it rejects the $ sign, so I've tried it using the Chr() format, which VB2008 allows. However, it doesn't work. Is Chr() the new version of Chr$() or are they different entities? In sending data to the LEDs, I'm using LiveComPort.WriteLine() as my command. (My serial port is called LiveComPort) I also tried it with LiveComPort.Write() asthe command. I know that my serial port and the LEDs are working, because they respond to the demo program provided by Velleman.
View 7 Repliesi'm creating a windows form to send/receive data to/from serial port.At first : i send the data as string to the serial port .Second: i tried to read the string again for test the successfull transmission , but i recieved empty string
[Code]...
I can find documentation (preferably with code samples) that will guide me through all the steps to activate and read from a serial port?
View 6 RepliesFor my application a need to set a breakstate on/off of 25ms.In Xp this runs fine when I set breakstate=true and wait for 25ms and then breakstate= false and wait 25ms.In CE6.0 when I set breakstate = true, it only throws a puls.It is even not possible to keep breakstate on.
how to solve this or is there an alternative to simulate a breakstate?
can we communicate to Serial port COM1 through Microsoft Robotic Studio?We are developing wireless robot which will take data from serial por
View 14 RepliesFor many years, I have sent data between 2 computers using serial ports."Here is the data", "Thank you for that data!" type stuff.Where do I get more information for doing the same thing with 2 computers that are networked together? Assume a local ethernet connection.I have experimented with serial-ethernet modems and that works well but I don't want any more hardware.Is there a good thread here I should read?I want 2 VB programs running and I want to exchange data periodically.
View 2 RepliesI know things have changed in VB2005.net and i have Express and i want to controll the serial port. I have a program from VB6 that i understand and i tried to convert it but i get alot of errors and i have know idead what they mean. As you can tell i haven't been programming very long.
If someone can point me in the right direction for programming the serial port in VB2005 .net i would appreciate it or tell me what differences there may be.
I am developing a UI for an embedded device that I have designed and built. The device uses an FT232 chip which, when connected via USB is automatically assigned one of the COM ports. I was wondering if there is a way to set up a loop which would automatically detect which COM port the device has been assigned. I could then add some handshaking to verify that the port is correct.
View 4 RepliesI have a little code for get the serial port available in the system.
For Each pn As String In IO.Ports.SerialPort.GetPortNames
Debug.WriteLine("NAME : " + pn.ToString)
Next
[Code]....
So, The PORT1 and PORT5 its ok (because this are real serial port, with a real RS232 interface), but PORT4, I don't know.
How I can do for get only true serial ports ?
I am facing problem reading data from Serial port. Actually I am connecting with the hardware device called Crimp Force Analyzer. It gives the data on hyperterminal and I have to read that data from my <acronym title="Visual Basic">vb</acronym>.net program. The data is somewhat like this:
[Code]....
I'm looking for a program that would read and import data from my serial port and then graph it. I don't mind buying it if it's not a free program.
View 6 Repliesi am new to VB.net and i am writeing a program to read a serial port and if there is any thing in the buffer i want to read the data and put it in a string then clear the buffer
View 1 RepliesIve got a big problem.I need to read data from the serial portIve used serialport from the toolbox , but dont know how to use it.I used to do it on a Amiga like this
open serial("serial.device".0.2400.0) rem(open port)
repeat GW.w=readserial(0)
if gw>29 and gw<128
[code].....