I have a function in VB.NET that loops through values and attempts to convert it to a decimal if IsNumeric is True,
Dim Value As String
If IsNumeric(Value) = True Then
Rate = CType(Value, Decimal) <--- bombing here
End If
I've found that when the function receives the value 603E43 IsNumeric evaluates to True for some reason and then bombs on the conversion. Why would IsNumeric be true in this case?
I have the following...
Dim a as long
Dim b as long
Dim c as long
[code].....
The result is different comparing i calculate it using a calculator or Excel....I tried setting variables type of Integer the result is still wrong....
Im writing a program and its pulling data from a .MDB to put in a .DAT file.
Here is my while loop:
vb
database_connection()
sql = "SELECT * FROM tlalist"
[Code].....
In my database there are currently 6 rows. and only 1 row has the TLA_DAY column equal to 1, but for some reason when I look at the .DAT file it creates it outputs the result twice rather than only once.
Once JTLA_count increments it becomes "2", but the while loop still outputs as if its still equal to "1". Ive used breakpoints and the counter is incrementing fine.
Anyone else have an issue using read, It appears when I use read it gives me the correct buys but returns the wrong integer value So I use it and it fills the Array i make with &h10, &h6 but read reutnrs number of bytes returned to 1. if there a better way to go with Vb.net with RS232 I mean really my projet dosent have anything out of the Normal
Friend WithEvents CashValidator As System.IO.Ports.SerialPort = New System.IO.Ports.SerialPort("COM1", 9600, IO.Ports.Parity.Even, 8, IO.Ports.StopBits.One)
CashValidator.Read(MyResponce, MyResponceLen, 4)
I've got a DataGridview I want to remove columns from as it greatly increases performance when I format the DGV. The first time I remove columns in a loop (using the removeat) property, everythings fine. But when I try to remove more columns in another loop, it appears to remove the wrong columns and displays the wrong data. In other words, it displays the wrong data and headers; and the columns it does show has headers and cells that don't match.
[Code]...
I currently have this line of code which has been working for the past 6 months:
If IsNumeric(txtProductID.Text) Then
...do stuff
Else
Dim msg As String = "Error!"
End If
All of the sudden, no matter what kind of entry is put in txtProductID (including plain numbers), it fails! Is there reason for me to be going crazy over this?
What is the C# equivalent function of IsNumeric() in VB.. If possible include an example.
View 4 RepliesI want to change the IsNumeric to string in the code below but IsString gives an error how can i go round it Private Sub txtprojtypenw_Validating(ByVal sender As Object, ByVal e As
[Code]...
I have VS2005 and I'm trying to use a function like isNumeric, except it accepts an array of strings.
[Code]...
I keep getting errors, anybody know why? Might just be a stupid mistake, haha its been a long day today.
Public Class Form1
Private Sub Button1cmdRun_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1cmdRun.Click
Dim hour As Integer
Dim minute As Integer
Dim second As Integer
[Code]...
Whenever I run the program and I enter text into the label the program crashes. When I type in a negative number the message box works. A number like -45 worked and a message show appeared, whilst a string like 'bob made the program crashed.
When was isnumeric considered legacy code? I guess all that i have learned from my college class last semister is legacy.
View 4 RepliesI'm working with visual studio 2008 developing software for windows CE 6.0, compact framework.I'm having this "strange?" trouble with isNumeric method. Is there another better way to do this job? Why is getting me an exception? (two in facts...both of type FormatException)
dim tmpStr as object = "Hello"
if isNumeric(tmpStr) then // EXCEPTIONs on this line
// It's a number
else
// it's a string
end if
Following a recomendation from an expert, I removed the Microsoft.VisualBasic Reference from my project in order to "clean" the code and use only .NET. Almost anything I have been able to fix except I cant find the equivalent of IsNumeric or IsDate functions.
View 13 RepliesI have some customized string formats of double values. I need to convert these strings to double values at some point (Note that these strings may contain error messages other than numbers). So I first check if these strings are numbers, and if yes, then convert them to double. Isnumeric works for my first customized string format. But I found that is numeric cannot recognize percentage strings. I wonder why isnumeric understands () but cannot understand %. And what is the better way to convert "(100.00)" and "50%" to doubles other than Cdbl?
[Code]...
I had a strange error in a VB6 app this morning and it all stems from the fact that IsNumeric is not working as I expected. To me this seems like a bug.
This code displays 4.15877E+62 in a message box:
Dim strMessage As String
strMessage = "0415877D57"
If IsNumeric(strMessage) Then
[Code]....
I am guessing that the runtime engine is incorrectly thinking that the D is in fact an E? I think this is a bug though as the exact same code in VB.NET outputs not numeric Is this a known issue with IsNumeric?
On all my assignments I am asked to make sure the data is valid - only numeric, no empty strings. And I keep wondering which is the best to use IsNumeric or TryParse. When I try both on coding they seem to do the same thing, and I don't seem to find my answer online. Any ideas of why to use one over the other.
View 3 RepliesPrivate Sub Bearing_Textbox_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles Bearing_Textbox.KeyDown
If e.KeyCode = Keys.Enter Then
e.SuppressKeyPress = True
Call Plot()
[Code] .....
Which is used to plot bearings. The user inputs a bearing of 0-360 degrees. It works fine if a user say types in "abc" or "/" i.e. anything that isn't numeric. But if a user types in "90/" then it allows it. When the bearing is plotted the keypress is surpressed so the user cant then go back an edit. Is there a quick way to amend the code to allow for this?
I am currently having a headache on how to solve this problem that i am facing. here is the situation: I have a combobox and a list box on the main form. The combobox will get the data from the ms access database. In the database, i have the details of a person's IC, Name and DOB say for eg on one entry I have D215311523C,SHAWN,13/04/1987 So now, my combobox on form load will show the list of dates in the database to allow the user to search base on the date itself by clicking on the selected date. So when the user clicks on the particular date say 13/04/1987, people in the database whose birthday is 13/04/1987 will be shown on the listbox.Meaning to say if i have 3 entries whose dates are the same 13/04/1987, 3 entries will appear. If there is only two entry, then two results will be shown. But now, when i do a single click on the date, one result will be shown. That is correct. But the problem is when i click on the same date again, three of the same results will be shown on the list box. that is it will display : 13/04/1987 13/04/1987 13/04/1987 which is not the case. Then it will show more duplicates of the same results if i click more times on the same date which should not be the case.
Dim n As Integer
Dim numbers() As Integer
Dim StartFrom As Integer
Dim EndAt As Integer
[code].....
I am using a datagrid in my where i am having four columns. In first column the parameter values are entered and in the second column measured value is entered and in third column the nominal value is entered.Inthe fourth column the result is displayed by subtracting the measured value and nominal values. I am doing this calculation in Datagrid cell validated event. What i want is,there will be many rows in the grid,when typing the value in the third column the corresponding result will be displayedin the rowof theresult column,save button will be displayed while the form loads,when the calculate part is completed that is there should not any cell of the resut column empty then i should enable the save butto.
View 2 RepliesI am encountering the following issue So i have a device that sends stuff at the serial port, i then parse it and put it into an array of bytes like that:
Dim HCI_Command_Rcvd_Byte() As Byte All good till here What i wanna do is make an array and put this result every time the serial port gives me a new result, for example:
[Code]...
Basically what i wanna do is let the port parse the messages, fill in the array with the result at an empty spot in this array and then i will have a separate thread that will look in into this array in each non empty space and after it looks into the non empty space it will use or discard the info and also mark this space as empty (after it checked)
I just read about DataSet in VB.NET, it uses disconnected concept. My question is: if my apps has "List All" button that query data from 1 table in the database, and that table has "very very very" many rows, so my DataSet will be filled with those data and eat up memory. Can I limit the data that being put to the DataSet from that query? But I want to be able to retrieve the next data from the same query if the user want to see it?
For example:
I have 1000 rows in my database, and i query all of them. But I just want 200 rows being inserted to my DataSet, but if the user want to see rows number 201 and so on, I want to be able to retrieve the next 200 rows, and so on. So it just like cutting those data into a group of 200 rows. Can I do this with the concept of "disconnected" of the DataSet?
I have build a DLL with COM enabled. In this DLL I have classes that did use the functions CInt, CDec and IsNumeric. If I test these classes from a .NET application then it works ok. But when I called/run these classes from a Win32 application (with COM) then I did get an "E_UNEXPECTED(0x8000FFFF)" error.After some debugging I found out that the problem would go away if I:- replaced IsNumeric with Integer.TryParse or Decimal.TryParse- replaced CInt with Integer.Parse- replaced CDec with Decimal.Parsey.
View 2 RepliesI have set up a method in vb.net and in xcode for encrypting a string using as far as i can tell the same parameters for an AES encryption.I've looked all over the place but cannot find information on whether they use the same encryption algorithm and settings.
this is the vb.net code:
Dim encryptAES As New AesCryptoServiceProvider()
Dim encoding As New UTF8Encoding()
Dim encryptor As ICryptoTransform
encryptAES.Key = encoding.GetBytes("12345678901234567890123456789032")
encryptAES.IV = encoding.GetBytes("1234567890123416")
encryptAES.Mode = CipherMode.CBC
[Code]...
How to tell a programmer he is wrong?
View 1 RepliesI have a login form which accesses to my website by WebBrowser. You have to put Username and Password in the two Textboxes to login... It works fine and it loggs me in to my site...but how can I tell if the password is wrong or not?
View 5 RepliesI am trying to wrote to the registry but it redirect to the wow6432node instead of where I want it, how do I fix this?
[Code]...
I am converting a VBA program to VB. I need to create controls at runtime as I don't want the user to be limited to the amount of information that they can input. I am converting this statement in vba:
Dim CF As CashFlowControl
CF = New CashFlowControl
CF.Cashflow = Form1.Controls.Add("Forms.Textbox.1", "Cashflow" & Cashflows.Count + 1, True)
With CF.Cashflow
.Left = Form1.Label2.Left
.Width = Form1.Label2.Width
.Top = Form1.Label2.Top + Form1.Label2.Height + (Form1.Label2.Height * Cashflows.Count) + 5
.Visible = True
.Text = 0
.Text = Format(CF.Cashflow.Text, "$#,##0.00")
End With
I have tried:
Dim txtbox As New TextBox
CF.CashFlow = Form1.Controls.Add(txtbox)
With CF.CashFlow
.Name = "CashFlow" & Cashflows.Count + 1
.Left = Form1.Label2.Left
.Width = Form1.Label2.Width
.Top = Form1.Label2.Top + Form1.Label2.Height + (Form1.Label2.Height * Cashflows.Count) + 5
.Height = Form1.Label2.Height
.Visible = True
End With
I've also tried:
CF.CashFlow = Form1.Controls.Add("vbtextbox","Cashflow" & Cashflows.count + 1)
With CF.CashFlow
.Left = Form1.Label2.Left
.Width = Form1.Label2.Width
.Top = Form1.Label2.Top + Form1.Label2.Height + (Form1.Label2.Height * Cashflows.Count) + 5
.Height = Form1.Label2.Height
.Visible = True
End With
I still get the little wavy underline under the text after the "Form1.Controls.Add" statement and the error says "Value of Type 'string' cannot be converted to 'system.windows.forms.control." I also get the error "Too many arguments to 'Public Overridable Sub Add(value as systems.windows.forms.control)"
What am I missing here? This seems to be the way it is done in all of the examples that I have found on this site.
So i had a some objects on my project like a few textboxs and buttons, which all had code tied to. For example text1 button1. I delete the two objects (not code) from the project and then paste a text1 and button1 (same exact names) back into the form. now when you click button1 or text1 you get
"Private Sub Button7_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button7.Click"
rather than the code all ready in the project for button7. The reason im doing this weird situation was because i goofed some of the object settings and was copy and pasting the old objects from a backup version.
I'm quite new to VB Programming and I'm using Microsoft Visual Studio 2008 for programming. I'm writing an application that communicates with an Omron PLC via CX-Server Lite which brings some ActiveX plugins for VB. So far I solved a couple of problems and my application "is doing something" already.My question in the end might be really easy. I inserted 3 bitlamps (Omron ActiveX Components) in a form, gave them the size and position I wanted them to have. When I now start my application they show up in the wrong size. It seems as if they would keep there position but they simply have the wrong size and even overlap each others although I have them sorted nicely in Visual Studio.Another effect I have is, sometimes when I move the components around on the Form in Visual Studio they seem to be "behind" the Form. I can't see them anymore but i can highlight and move them.
View 3 RepliesI made a chat-room in Visual Basic, but when I run the deBug it works fine. When I build the application that's where things go wrong. I am using C4F-P2P.
Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.
An error occurred creating the form. See Exception.InnerException for details. The error is: Could not load file or assembly 'C4F_P2PWinformControls. Version=1.0.0.0, Culture=neutral. PublicKey Token=9569f7192217be80' or one of its dependencies. The system cannot find the file specified. ""DETAILS"" See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
[Code]...