I have one datagridview control and there one column are there for money data type. But if user press to minus (-) keyword then it should be display like -$10. and again if user will press on (-) keyword then it should be remove i.e $10 .
View 3 RepliesI have one datagridview and there some field are there for money dataType. But if user want to add (-) keyword then it should be display like -$10. if again user will click on (-) keyword then it should be remove i.e $10 .
View 8 RepliesI would like to know how I would separate the $ from number. I am reading data from a text file. the last column has a contain $12.00. I am able to split the five columns into an array. But also want to be able to remove the dollar sign.
i.e.
John Kay Lame Welder $20.00
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown
Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
[Code].....
i want that when the user presses enter (ctrl+enter) in a datagridview cell the pilcrow sign will be inserted.is there any automated way to do this or do i have to catch the event and substitute the new line character with the ascii pilcrow sign ?
View 3 RepliesIm importing text from a .txt file using streamreader and when it reads in a � sign it converts it to the square symbol for a unknown character! If i put in a $ sign it imports it correctly!
View 2 RepliesIs it possible to disable cursor moving from cell to cell in datagridview?
View 5 RepliesIs it possible to hide the header cell for each row in datagridview?
View 7 RepliesI have a Datagridview called DgvReturns. which contains two fields,
1) Yes - checkbox (boolean)and
2) Received Date - textbox (DateTime)..
What I want to do at run time is that when a user Checks the Yes checkbox Received Date is populated with the current Datetime.
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
View 1 RepliesI have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
View 13 RepliesI am having a problem with the cellvalidating event constantly firing when the datagrid is refreshed (since the trigger that fires the event is the originally selected cell losing focus).I would like to remove the event handler for this at certain points of my code so that it does not fire but the examples I have come across on MSDN don't appear to do anything, so I guess I must be doing something wrong.[code]
View 1 RepliesI'm making a datagridview, and I want to remove de cell selection border.
I tried to put these:vb
Private Sub dgvL_CellClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgvL.CellClick
dgvL.DefaultCellStyle.SelectionBackColor = dgvL.DefaultCellStyle.BackColor
dgvL.DefaultCellStyle.SelectionForeColor = dgvL.DefaultCellStyle.ForeColor
I have a form with four checkboxs and a textbox for an id number.I also have two tables in a database. The first has a column for the users Id, Name, and a column called Points.The second has a column for Id and one called Letters.What i want to do is, after the user enters the id number, and the user clicks checkboxA it should add a certain number, lets say 5, to the "points" cell for that id#(in the first database), and it should put the letter "a" in the "letters" column (of the second database) for that id number. Also, if a user deselects a checkbox it should remove the "a" from letters and subtract 5 from points.Also there will be different letters in the "letters" cell, so i cant just clear it, but i have to remove the specific letter.
View 13 RepliesI have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
[Code]...
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I wish to have a list selection inside a cell of it. like when the cursor is placed in a particular cell and the user hits 'Tab' button in keyboard a list of names & no should be listed and they have to select a particular name, click a particular row in the list form, which in turn needs to fill the cell with the name value.m
View 5 RepliesThere are 3 columns(Count,Item,Price) in datagridview which is bound to a datasource. The count is 1 by default and it should increment by 1 when i click on a button,so the count would be 2 if i click button again
View 3 RepliesHow can I get the value of the first cell of the row of the selected cell or selected row in a datagridview?
View 5 Repliesi have a datagridview which i populate of a dB. i have 3 columns on the dgv Account ID, Account Type and Notes. i created an add record button, that enables the user to add records. Account ID is a numerator in the dB, and i would like to automatically add 1 to the numerator. however i can't get the value of the last cell in the last row. for now i am using
Dim RowCount As Integer = Me.grdAccountTypes.RowCount - 1
Dim AccountID As Integer = grdAccountTypes.Item(0, RowCount).Value
MessageBox.Show(AccountID)
How to do that no one cell is selected in DataGridView at first moment? (There are some controls in my form before the DataGridView and I don't want that any element of DataGridView is selected when the form is loaded).
View 2 RepliesI have a datagridview which have a ComboBoxCell, ComboBox is bound to data,, I want to use it as Traditional ComboBox,, I mean I want to display its Item (from display members) on the base of its value.
For example:
When I do this
Datagridview1.CurrentRow.Cells(4).value = 4 'Cell 4 is the DatagridviewComboBoxCell
It gives me the error that
"DatagridviewComboBoxCell.value is not valid",
But I want that this combobox should Select And Display the item which value is 4.
I'm using VB.Net.'m using DataGridView with ColumnType = DataGridViewTextBoxColumn.
I have 3 columns. Column1, Column2, Column3. for example:
Column1 Column2 Column3
1 AA AAA
2 BB EDIT
3 CC CCC
If column3's value = "EDIT", then I need to edit only that cell. Here for example: i need to make the Column3's second cell to be readonly=false.So i cannot make any changes to (1, AA, AAA), (3, CC, CCC) and (2, BB). Need to make changes only EDIT cell.I tried this code. CountR is the row in which EDIT values is there.
[Code]...
After trying to search this forum and looking in 2 different VB 2010 books
I still don't know how to read a DataGridView cell into a variable.
I think the code should look something like this[code]...
how to change the Cell Alignment depend on the conditions. If cell value is text then cell alignment should be Left and If cell value is Integer then cell alignment should be Right.
I am going to change the Default Cell Style property then all cell alignments are changing.. But i want to see if cell value is Integer then the value starts from Right Side...
I want to add text to a specific row, column in a DataGridView grid. I have tried several ways to do this bit none seem to work.
View 6 RepliesI have several date fields in a datagridview, in sql these are saved as navchar fields. If the user needs to clear the date they can do so by highlighting the field and pressing the delete key. This clears the date no problem, unfortunately it sets the field to Nothing or "" (a blank). I need it to set it back to NULL for reporting purposes.
Here is the relevant part of the code:
Private Sub dgvWeldingLog_CellEndEdit(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgvWeldingLog.CellEndEdit
Try
If dgvWeldingLog.Columns(e.ColumnIndex).Name = "dgvtxtDateWelded" Or _
dgvWeldingLog.Columns(e.ColumnIndex).Name = "dgvtxtFitCheck" Or _
[Code] .....
If there is an error in the data entry then the form cannot be saved. When I trap DBNull.Value is says it is equals to "Nothing" and not "NULL".
Currently I am using this code to fill my datagrid.
Dim da As New SqlDataAdapter("Select id, name, type, add1 from [company_details]", con)
Try
If Pdetails.Visible = True Then
con.Open()
Dim ds As New DataTable
[Code] .....