Ok, sorry to be so needy this week! Here is the situation. I have discovered how to do a linq query to get my data from my xml but when I return it as a string to a list box it is coming in as one large line. No breaks.
Here is the xml:
- <record>
<jurisdiction>VA Circuit</jurisdiction>
[code].....
I am a beginner and trying to learn. My problem is I am trying to break down a string for a part number. The string looks like" ABCD259A8755" . I need to separate it to sections like ABCD, 2, 5, 9, A, 8, 75, 5,
View 3 RepliesI am very new to VB, and am programming in VB 2008 express. Sorry if this thread is in the wrong spot I need to add two 40 digit numbers together and was thinking that the simplest way to do it would be to input them as a string and then convert the string to a single dimensional array where x(1) is the 1st digit in the number, and x(30) is the 30th digit, etc. I would do the same for the other number where y(1) is the 1st digit. I would then add the x(40) and y(40) (which are the last digits of the number) together and carry the remainder into the next addition (39th digit, 38, ...)
[Code]...
I have a string STR="CYHZ 262338Z 2700/2724 27012G22KT P6SM BKN040 TEMPO 2700/2710 5SM -SHSN BKN015 BECMG 2702/2704 28015G25KT FM271000 28018G28KT P6SM BKN040 BECMG 2722/2724 27012KT RMK NXT FCST BY 270300Z"
I want to put the new line characher before these words in the string(TEMPO, BECMG, FM, RMK) so that the output string look like this
[Code]...
When trying to register a new user on the server, the server will post back messages such as "OK" and "usernameTaken". Upon comparing this returned string with another string (to perform an action based on the returned value), the compare isn't working.
Dim backupX As New CBackup
backupX.startSocket("127.0.0.1", 8888)
Dim str1 As String = backupX.registerUser("user1", "testpass")
Dim str2 As String = "usernameTaken"
[code]....
Looks to be like the socket code is working just fine.. each Function returns the corresponding Functions' Return value (registerUser -> SocketSendAndReceiveMSG -> sendAndReceiveMSG -> receiveMSG).
i have a column that i want to select from a table called style_number
each entry is listed as "something-stylenumber"
is there a way to strip everything from the - and to the left from the string when it is returned from mysql?
SELECT style_number FROM table1
I do not want to have to use vb.net to edit the returned string for each line that is pulled
I have the following web method:
<WebMethod()> _
<ScriptMethod(ResponseFormat:=ResponseFormat.Json, UseHttpGet:=True, XmlSerializeString:=True)> _
[Code].....
I wanted to use HttpGet here so that the result can be cached.
I tried every variation of calling this, but no luck. Is this possible with GET?
I am forming up an XML string to post to a site. The function that assembles the string looks like.Function formXml(ByVal username As String, ByVal password As String, ByVal destination As String, ByVal messageText As String) As String
[Code]...
I need to do is post my results from an IF statment to show up in a text box, but i am not sure [code]...
View 3 RepliesI am trying to create a program that is able to submit post data for the page [URL] where it submits the request fields and then the resulting page is receiving in a string.
View 2 RepliesI have an old ClickOnce program, which has been replaced by a new one I wrote, and I am aware that some people are still using the old one.I want to somehow remotely remove it from every computer where it is still being used (there are far too many to manually find them).
View 2 RepliesI have an Input box that allows users to enter their full name. How do I break this input apart into first and last name to display tham into seperate boxes?
View 1 RepliesHaving a problem with sending a file via HTTP post in vb.net. I am trying to mimic the following HTML so the vb.net does the same thing.[code]
View 4 RepliesI am running a simple DO loop that I would like to run until terminated by a button click event. But, once the loop is running, all events of all controls in my form are ignored.How can I have a button click event break the loop?
View 3 RepliesI am needing aid in breaking words apart, and entering the one by one into a web browser at a random delay between one and five seconds each. I am downling my words into a textbox, and they all have spaces inbetween How can I enter these one by one, and at random times into my built in Webbrowser.
View 1 RepliesI hve a date selected from a calendar
I would like to break it down into its component parts i.e. Day, Month Year and assign them each to a variable
I have it in Excel
as
mydate = sOps.Range("G3")
'Convert the date in to string format
myday = Day(mydate)
[Code].....
I am working on a project and the code for FORMS1.vb has become quite large, 20K lines.How can I break this down into more managable pieces. I have tried Modules but I get multiple reference errorsd when I move like all of the reporting code to a module. The report code has nothing to do with the forms other than being able to call that code from an object on the form.
View 3 RepliesBulk Insert is only breaking every other row. I've tried every ROWTERMINATOR I can think of, but none of them will break all lines. I've even tried to break it on exact text, and it won't break it on that exact text. I've attached a pic and circled what appears to be the line break that it refuses to recognize as a line break. When I open it up in notepad, it recognizes it as a line break.
View 7 RepliesHiI'm trying to get a multi-line, word-wrap enabled rich text box to display text with non-breaking spaces in. For example, '20 000' should always appear as one word, not split onto the next line.I've tried {20'a0 000}, 20{'a0 }000, {20~000}, {20emdash 000} and so on. Nothing seems to work.During my searching, I did see a suggestion somewhere that the DLL that the rich text box is based on doesn't support non-breaking characters.
View 5 RepliesI'm converting a asp.net application from .NET 2.0 to .NET 3.5 I have loads of inline code like so:
Dim Total = 0
for each dr as DataRow in dt.Rows
Total = Total + dr("SumOfAmount")
next
Response.Write(FormatCurrency(Total,2))
Notice that there is no explicit type declaration of the total variable.This code worked fine under .NET 2.0 Under .NET 3.5, the Total variable is defined as an Integer, therefore the total is being rounded to the nearest dollar on every pass.I know one solution is just to change
Dim Total = 0
to either
Dim Total as decimal = 0
or
Dim Total = 0D
However I'd prefer to not have to visit every page in the system looking for this problem.Is there any site wide, or page wide option I can set the change this behavior back to the way it was under .NET 2.0?
I have used the openfiledialog on numerous occasions, and it has never caused a problem. (This is also happening to savefiledialog as well...) Put simply, its breaking my application..
Code:
Private Sub LoadMapToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LoadMapToolStripMenuItem.Click
[CODE]...
Even this bare minimum code, is causing most of my application to stop working. I have an onpaint method which should be drawing my map, it starts throwing exceptions(file not found), I checked my paths they are correct, I have a listbox linked to a picturebox, clicking a image' name in the listbox, loads the corresponding image to my picturebox, this stops working too..The program isn't hung, I can navigate my listbox, open menu's etc,.. It's breaking everything that has to do with images. I would post code, but, it's quite extensive, and the problem seems to be centered on the opensave dialogs.. (again, I have used this same code without trouble, so many times I have lost count, I'm at a loss as to why its acting up now...) Well, for now I created my own open file dialog, its a little crude compared to the real one, but, mine works..(ie, a standard dialog control, Ok, Cancel, with a ListBox loading the file names..)
In Visual Studio 2005 or 2008, when adding any User Controls to a Windows Form or other User Control in a Project that implements and is using a custom settings provider, a "Failed to create component" error is displayed. If all references to the custom settings provider are removed from settings.settings and that file is saved then User Controls can be added to Windows Forms and User Controls. However, if the custom settings provider is referenced again in settings.settings, then opening the designer of a Form/Control which includes a User Control results in a "One or more errors encountered while loading the designer..." error message.
I have had a very difficult time in tracking down the root cause of this issue because I assumed it had to do with my code and not the IDE. I am working within the context of a large project which uses User Controls heavily and have written a custom settings provider to persist user settings to a SQL Express database. This settings provider works properly, however if I want to open any Forms or User Controls in designer view I must first manually remove all references to my custom settings provider in setting.settings and then re-add them after the changes are done which is inconvenient to say the least. This problem is not present if the Project is in C#.
<edit on 10th March 2010.>
Changed thread type to QUESTION. I was then able to mark AS ANSWER the relevent post which now also immediately follows this post and so it is easier to find as suggested by forum user j2associates .
<edit> It is also my 3rd post in this thread, the 8th one up, of my posts, from the bottom ( for now ), as the forum format has changed yet again.I will leave the rest of this post( as is ) purely for historical reasons. I have been on these forums long enough to see 3 forum changes. <edit> 19th May, 2010> Link added to a video on the next line of text.
[code]....
so i have a file that i need to read in vb.net. Each line is 32 chars long and each line consists of multiple fields. Meaning from char 1 to 9 it idicates ID then char 10 indicates an identifier,11-14 indicates a value field. I've looked at Readblock and it's not the tool for the job. Is there a way to break up each line into its respective fields other than just reading the whole line and breaking it up as a string?
View 3 RepliesI've reached the end of my project but I have several unused and not needed .xsd files from trial and error of linking my program to a database. I want to clean up a bit and get rid of them while keeping only the essential files attached to this program. I tried deleting the .xsd files but it seems too ingrained into the program to the point where the program has several errors and just breaks. I have to manually restore the files from the Recycle Bin to get the program to start working again.
What are other solutions to get these files out of the project? I thought about clicking "Exclude From Project" but am afraid of the consequences. I figured I'd check with someone here before taking action.
I want to modify this function to populate an array with each item in the database.I have tried various options, but I just can't get it to work
Private Function ConnectMe() As DataTable
Dim conn As String = "Server=192.168.0.36;Port=3306;Database=wswc;Uid=r oot;Pwd=Jack"
Dim cmd As String = "SELECT * FROM st_users"
[code]....
Instead of fill, I want to one by one add it to the dataset and also an array?
When trying to use Try/Catch in my code the INSERT statement does not work, but when I comment out the Try/Catch it works fine with no error. The section of my code is below:
[Code]...
I have a listbox and a button event that responds to a selection. Is there a way to get the whole item row (including subitems) and copy it into a string? For example: engagement = ListView1.SelectedItems(0).Text that code does exactly what I want but only gets the main item and none of the subitems in my row. 'My Items code
[Code].....
I'm writing an application to help manage an employee database. It displays the current entries in a ListView control using the SELECT FROM sql string and allows entry into the database using the INSERT INTO sql string. What I want to do is have the user select an item from the listview and be able to delete it from the database. How I'm trying to go about it is by detecting when the user presses 'Delete'. When they do, the program gets the string value of the item, hands it off to a variable, and the variable goes into a DELETE FROM sql string and deletes the row in the database.
I have multiselect disabled in the control so only 1 selection is possible at a time. I don't know how to detect the Delete key or how to get the string value of a listview item into a variable. If I know how to do these two things, I can work out the rest of the application. I'm still kinda new at this kind of stuff, so any responses will have to be dumbed down a little.
I have a ListView control set up in details mode, and on a button press I would like to retrieve all column values from that row in the ListView.This is my code so far:
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim items As ListView.SelectedListViewItemCollection = _
[code].....