C# - Get Rid Of Crystal Report Generated Files In Temp Folder - Visual Studio 2008?
Jul 14, 2011
I have pasted below a piece of code where I am displaying a report. I am using Visual Studio 2008 Crystal Report engine. It works all good with the piece of code
Problem: Everytime a report is being run it generates a ('.*tmp', '.*rpt') files typically in a temp folder c:windows emp however we can get rid of the *.tmp files by setting a recycle on the application pool but need a way to get rid of the .rpt files.
Found solution: Call Close() and Dispose() on the report object. The way I am doing is crReportDoc.Close() then crReportDoc.Dispose()Actual Problem: If Dispose() is called the report comes up with the following error 'Object reference not set to an instance of an object'
[Code]...
View 1 Replies
ADVERTISEMENT
Jun 12, 2011
i am having a Visual Studio 2008 but it not install with crystal report when i open add new item-> its didnot contain Crystal Report how can i add crystal report and make crystal reports in visual studio 2008 how i install crystal report with visual studio 2008 only crystal reports 2008 install and its open with visual studio 2008 when we click Project->Add New Item-> and crystal reports shows in thiis file
View 1 Replies
Mar 11, 2010
I have "Visual Studio 2008 Standard Edition" and "Crystal Reports XI Developer edition".I have to integrate crystal reports in my application. I am fine developing the reports using the "Crystal Reports IDE" but not sure on how can I integrate those reports into my application.I have downloaded and installed the reportviewer control but not sure how to use it for crystal reports.
View 1 Replies
Apr 22, 2011
I am studying crystal report with visual studio 2008. I knew OLEDB, ADO.Net And ADO connections etc. But whatever connection that we must assign data sources. I want to non-configured and assign data sources as like data-grid. In the data-grid, we can configure data field name and generate data assignation in runtime. Can I do this for report or not. If I can this, tell me how can I do this.
View 1 Replies
Mar 15, 2012
Can any one provide me with the Crsytal report runtime installer for Visual Studio 2010.I have the installer of Visual Studio 2008 but its of no use.I need the installer that is the .msi file.
View 3 Replies
Jun 4, 2011
i cant install crystal report for visual studio 2010!
i already have installed vb express 2010 and yet the installation always fails because the installer says :You must already have Visual Studio 2010 installed to proceed with this installation
View 5 Replies
Oct 9, 2011
I want to ask about problem I had. I am using Visual Studio 2010 Version 10.0.30319.1 RTMRel
my Operating System is Windows 7 with 32 bit
and i am starting to develop report using SAP Crystal Report The step install is
1. I am going to page http://www.businessobjects.com/jump/xi/crvs2010/us2_default.asp
2. i download
a. SAP Crystal Reports, version for Visual Studio 2010 - Standard
b. SAP Crystal Reports, version for Visual Studio 2010 - Click Once
c. SAP Crystal Reports, version for Visual Studio 2010 - Merge Modules
d. SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit)
e. SAP Crystal Reports runtime engine for .NET Framework 4 (64-bit)
3. then i install
a. SAP Crystal Reports, version for Visual Studio 2010 - Standard => "CRforVS_13_0_1.EXE"
b. SAP Crystal Reports, version for Visual Studio 2010 - Click Once => "CRRuntime_32bit_13_0_1.EXE"
c. SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) => "CRRuntime_32bit_13_0_1.EXE"
after i success install those three program i started to going to Visual Studio 2010. and create project as usually. (I am developing VB.NET project) this is the step i am add crystal report
[Code]...
View 2 Replies
Apr 6, 2011
When I open a Crystal Report in Visual Studio I can view options for how the fields are formatted such as the date and numbers. I'm running a crystal report in a project, is it possible to edit these settings through code?
View 1 Replies
Sep 17, 2009
I have added the references but I go to add ew item Crystal Reports still doesn't show.
View 8 Replies
Feb 21, 2008
I have upgraded an existing project to be developed on Visual Studio 2008 but I still need to target the .NET framework 2.0My project had the prerequisite Crystal Reports for .NET Framework 2.0 but Visual Studio 2008 reports that that "could not be found for bootstrapping"Now my users get the error:Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version=10.5.3700.0, ...' or one of its dependencies. The system cannot find the file specified.
View 3 Replies
Jun 30, 2011
I am generating PDF file using Crystal report ExportToDisk method in VB.NET 3.5.
Locally and on integration environment generated PDF file is much readable i.e.font size is good. But the PDF file generated on production environment is different in formatting.The lines are wrapping and font size is also little small. There is not Adobe installed on integration.
View 1 Replies
May 10, 2008
this event works ok, but the problem is that I don't know what field was clicked. Should I use objectinfo or something else? VB.net won't recognize for example e.objectinfo.
View 1 Replies
May 31, 2011
I'm running Visual Studio 2010 on a terminal server, and have been, with relatively few problems, for some time. This morning I fired up my PC and over the UK's long weekend, the following issue seems to have developed.I've got a bunch of projects (but not all of my projects, and not all of the projects in a given solution) complaining that a particular file (which does not exist on the computer) cannot be opened, and so those projects will not compile anymore. Here's the error:
Error 31 Unable to open module file'C:Users[username]AppDataLocalTemp2.NETFramework,Version=v4.0.AssemblyAttributes.vb':
System Error &H80070003&
I could simply copy the file into that directory and be done with it, I'm pretty sure that will work,EDIT: Okay, now things have gotten to a whole new level of weird. I've rebooted the server, I get the same error message, only now the file it is asking for exists and can be opened in Visual Studio with no problems. another part of the IDE still insists that it's unable to open the module file.
EDIT 2: Can't delete the file because it claims to be open in another program, but I've logged off and logged on again, and there shouldn't be anything accessing it.
EDIT 3: Because there's a wall of comments below his answer, I'll mention here that Jared's suggestion to delete the SUO file for the solutions having the problem (not files specifically to do with any of the problem projects, strangely) was what solved this, eventually.
View 2 Replies
Apr 11, 2010
i understand that some files get published to this folder in my application. i want all the files to be in the same folder. how do i do this?
meaning that i want the setup.exe and everything to be in one folder after i have published the application. i dont want to have an application files folder at all
View 1 Replies
Aug 5, 2009
Is there a way to set admin permission on them user/AppData/Local/Temp folder?I need to set it so folders and subfolder cant be deleted, then turn it back on. Not doing anything shady... this is for personal use I make themes for BB phones, and there is a trick where you can set this permission, then export the theme, and it allows you to look at the code of the theme so you can make adjustments in how things work
View 2 Replies
Apr 11, 2011
Is it possible to open visual studio express files with normal visual studio?
View 2 Replies
Sep 29, 2011
My VB project is growing (Visual Studio 2008) so I want to group code into 3 different groups, like "Main-2 "utilities" and "DB functions" for greater clarity So I crete a new .vb file and put functions there. Can't figure out how to refer to the functions in another .vb file. Ought to be a basic thing but I am stuck.
View 4 Replies
Nov 23, 2010
I am using Visual Studio 2008 Professional to build a VB.NET console application. I have a text file that I want to copy to the output directory after a build. I would like to create a build event to do that, but I do not see a "Build Events" folder on the property page. Is there a setting where I can get this folder? Or, is there another way I can set up a post-build event to copy a file to the output directory? The folders I see on the Properties page:
[Code]...
View 1 Replies
Feb 22, 2011
When I'm in VS2008, and I go to File > Open Project/Solution, it won't let me select a .vbp file type when I have it set to Objects of type "All Project Files (*.sln; *.dsw; *.vcw; *.rptproj; *.dwp" (it looks like it's cut off at that point). Why can't I open a .vbp file with Visual Studio 2008?
View 2 Replies
Jan 21, 2010
When I drag an item from my data sources area onto my form, VS automatically creates a tableadpater, bindingsource, and bindingnavigator for me. This is great. The name it picks "xxxxxtableadapter", "xxxxxbindingsource", and "xxxxxbindingnavigator", where "xxxxx" is the tablename, is in my opinion a bit wordy.
View 3 Replies
Jan 3, 2010
I want to distribute the installer package to my clients. how can I make setup.exe file for my visual studio 2008 projects.
View 4 Replies
May 17, 2012
I have created a project in which i am printing Hall ticket for an examination. i am using visual studie 2008 as front end and sql2008 as backend. I have created a report in crystal reprot. I have photographs of students in a local folder. how do i access or call each of the photo in the report. i m not getting anything how to go about.
View 1 Replies
Aug 26, 2011
I am creating reports in Crystal Reports that is integrated within Visual Studio 2008, and I noticed that some of the features are disabled. One is the ability to link tables with a Right Outer Join or Full Outer Join. I also cannot "Show SQL Query" in Crystal Reports. Is this something I can enable or do I have to purchase or upgrade?
View 1 Replies
Feb 23, 2010
This started happening randomly yesterday. When I press F5 to test my project, an old build of the program (circa yesterday afternoon) launches. No changes (and I've tried in a few different files) are reflected in the project. However, and this is truly perplexing, if I go to Build --> Build from the Menu bar, the output .exe in the /bin/release/ directory DOES include all the recent changes.
[Code]...
View 2 Replies
Jun 5, 2011
How to create crystal report using xml files?
View 3 Replies
Aug 11, 2011
I hope I got all that in this question title. Let me explain. We are starting on small desktop app that will snowball into a big app with many forms. The database is SQL Server. It will have classic stored procs/functions performing classic CRUD functions. Given a table or stored proc in SQL Server what is the quickest way to create a form with all the hooks to maintain a table.
For e.g. lets assume I have table like this (most code below is pseudo code)
Table Employee
{
Name varchar(30)
DOB Datetime
Address varchar(100)
}
From this as source I want to create my Target which is form with 3 labels and 3 textboxes with add delete modify buttons (or OK button to add if not exists or modify if exists)
[Code]..
The code generation tool or technique that will be used should generate the correct db hooks (create SQL parameters, SqlCommand, execute sql.. basic try catch etc. Is there any open source tool to do this ? Some trick or templated approach via VS 2010 ? Worst case any third party tool ?
View 3 Replies
Jun 21, 2010
I m using .net , I create some temporary tables at run time, how to print these table data thru crystal report
View 1 Replies
Feb 21, 2012
When I try to print my record using ReportViewer.exe error that given is - "The Array s Fixed or Temporarily Locked (Run Time error When I debug through the code error is - "Method 'AddRows of object 'ICrystalDataObject' failed"
Dim cdoRecordSet As CrystalComObject
Set cdoRecordSet = CreateObject("CrystalDataObject.CrystalComObject")
[code].....
View 2 Replies
Jun 26, 2010
I'm very new to Crystal Report for Visual Studio 2010 hence, kindly give me step by step instructions to do the report on Windows Form. I'm using SQL Server for my Database (SQL Server 2008 Express) and Visual Studio 2010 Prof
View 5 Replies
Aug 4, 2011
Can i use vb or c# in crystal reports? Or do I need visual studio + plugin? It seems crystal reports only has a math function window.
View 2 Replies