I am making this thing to fool around, and it has a couple radio buttons, and a "apply" button...
Radio1 say's "A", radio 2 say's "B", and radio 3 say's "C".
All I want to happen is when I choose one of the radio buttons, and press the APPLY button, and I have notepad.exe open, it calls the keyboard key A,B, or C to be pressed. give me an example of keypress? Like IF I PRESS THE KEY 6(^), THEN....
I've written a program that brings up a form with some radio buttons for the user to choose.The form is setup by a sub in module1 (called Type2Q, shown below). For some reason, often radiobutton1 is checked when the question appears.I specifically set checked to false since I did not want this to happen. [code]
View 3 Repliestrying to write a simple form for calculating professor's salaries depending on their degree and position.my problem is that the when i select a check box, the value is not being updated until i select a different radio button. it probably doesn't make much sense here,
Public Class frmMain
Private Sub optLecturer_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optLecturer.CheckedChanged[code]....
the values being assigned to my salary label are correct, but are not being updated until i select a new radio button. im not entirely sure how to get around this so that the value is updated as soon as i select the check box.here's when the program looks like:
Ok so I can't figure out how to make it so that on my application users cannot just click "submit" without choosing a radio/option button & filling out the username + password field ?? Using VB 08 BTW.
View 6 RepliesI need to have 4 text boxes and three command buttons. One button should be used for exiting the program, one button should be used for clearing all of the text boxes, and the last button should be used for any calculations/conversions. You should also have a radio button group for the user to choose entry temperature type.
One text box should be used for the entry of an initial temperature. The radio button group will then allow the user to select the entry temperature. When the button is clicked for conversion, the other three text boxes will populate with answers to the conversion. and if I enter 37 degrees Fahrenheit, the Fahrenheit text box should read 37 after the conversion.)
I have run into a brick wall here with trying to figure this out what I have is a button that when clicked on opens up the windows control panel. and then options can be set and you then close the control panel.
then there is two radio buttons one says enabled and one says disabled what they do is check the registry after the button has been clicked on and depending on if the registry is set for 0 or 2 0 for disabled 2 for enabled...
I've tried various ways but I cannot get the radio buttons to check properly
I am new to VB 2005, and need help with use of radio buttons. I have two sets of radio buttons set up in my from, each set has three buttons. The problem is that when I run my program, it runs them as one set (i.e. I can only select one button in the form) I want to be able to select one button from each set, how is this done?
View 3 RepliesI have a gridview in wpf and have a two radio buttons and a button in template column. How do i access the status of radio buttons in the click event of the button?
<DataGrid>
<DataGrid.Columns>
<DataGridTextColumn Binding="{Binding TrackingID}" Header="TrackingID" Visibility="Hidden" Width="50" />
<DataGridTextColumn Binding="{Binding UserFullName}" Header="Name" Width="140" />
[code]....
I have created a program that has 5 radio buttons and each button is named after a city. When clicking these buttons a picture of a landmark of that city comes up. However, I would like to enable my "clear" button.I have found a couple of examples such as;
Private Sub Clearbutton_click' Clear previous amounts from the form.
Titletextbox.clear()
Pricetextbox.clear()
end sub
So is what I attempted to do is under my DetroitButton1 i did a
[Code]...
I am having 3 radio buttons and a button The codes should be added to the button_click event, when ever the radio button is selected and the button is click then, The codes should determine which button is selected and assign it to a variable. Create a two parallel 1-dim arrays and populate it with the data below:
[Code]...
I have one radio button and one listbox .i want code for display listbox depends on the radio button check true and false.
View 3 RepliesI have numerous buttons that add different values to a total score. In the future also wanting to keep track of which batter scores runs. I have 2 radio buttons labelled "BatterA" and "BatterB". When 1 run is scored the batters will change ends, so i want the radio button to automatically change to the other batter when the "1 Run" button is clicked.
View 5 RepliesI'm using a dialog form with two buttons and two Radio buttons.I'm oppening this Dialog when a button is clicked on the parent form.My situattion is when the Dialog opens the code in the button event continues to execute, but I only want it to continue to execute only after a button from the dialog form have been clicked
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If multipleEXT = 2 Then
Extension.Show()
[code]....
i have problem that i know once someone answers, i will kick myself, but here goes. i need to move the text next to the radio button to the left of the radio button, that part is easy just make sure the the "right to left" is maked yes, got it. but, the problem is i am making a seating chart and the seats are labeled 10-a, 10-b etc.... when the right to left is set to yes my text reverses and becomes a-10 and i can't seem to figure out what is set in the properties the is causing the alpha to be placed before the numeric.
View 2 RepliesMy VB application is behaving strangley. I have form with fairly large number of controls. I am using case against radio buttons. after curtain number of buttons, it stops responding to more radio buttons.
Then I tried to split controls in to 2 form but now my form.showdialog() too now working properly. It takes new from names but show the old form when running.
Using 2 forms how would I click one button, from another form? ie In VB 4,5,6, I would used to do it as:-
Form 1:
private sub Command1_Click()
msgbox "Say Hello"
End Sub[code].....
If I clicked the button in form2, it would automaticlly, click the button in form1. Do I, do it the same way in VB Express or has it changed?
im trying to add two radio buttons together to get a full price, they are split up by two group boxes. Meals and dormitories, I have the prices on how much they are, but I dont know how to put the right radio buttons in the right places and then add them up, here is the code I have so far
Public Class Form1
Const decRadioButtonmichigan As Decimal = 1500.0 ' this is suppose to go in the dormitories group box
[code]......
I am trying to figure out how to use radio buttons.when the radio button is selected it should display a integer number in the text box.
This is what i have so far[code..]
My homework is the following: public Class Form1
[Code]...
I have the hwnd of every application active on the desktop and the index of them own taskbar buttons (hwnd1 ==> button index= 1 ; hwnd2 ===> button index = 3 etc etc)
I whould like to press the buttons to activate the applications by VB.net code
I have tried several kind of SetForegroundWindow code found on the web, but the code not always works... often only I obtain to flash incessantly the buttons.
I have tried several kinf of SendMessage code found on the web... no one works.
To simulate the Alt+Tab keys is not a good idea, because appears for some istants the alt+tab window..
I have a need to add 16 radio buttons to a groupbox but I want to be able to select 2 radiobuttons per groupbox. (2 vertical columns of 8 radio buttons each) The radiobuttons are created dynamically and each set of eight have different names to distinguish them. Do I really have to create 2 groupboxes and put each set of 8 in each groupbox and put those groupboxes into my parent groupbox? Is that it with radio buttons...if they are all in 1 groupbox then there is no way to select more than one at once?
View 1 RepliesI'm having issues with my current homework. I've got 6 different radio buttons and depending on which one is checked, the corresponding price shows up in the text box. I'm not sure if I need to create a sub-procedure or what. I can't seem to get anything to work.
[code]...
I've gotten this far with the code but not sure where to go next.
I've figured out how to run through the radio buttons and save their checked status to a text file. Now Im trying to recheck them according to the value. Here is what I have.[code]...
View 1 RepliesIs it possible to create a list of radio buttons similar to that of a checked listbox?And the list of radio buttons should be able to be managed like that of a CheckedListBox?
View 2 RepliesI have several textboxes in my form and a groubbox that have four radiobuttons. I want all the values of the textboxes (and the selection of the radiobuttons) to be stored in sql server. As far as the values of the textboxes in concerned, I managed to do it. But what about the selection of the radiobuttons??? This is the code I am using for the textboxes:
objConnection.Open()
objDataAdapter.InsertCommand = New SqlCommand()
objDataAdapter.InsertCommand.Connection = objConnection
[code].....
What I have is a search program where people can enter in a person's policy number or first and last name and then chose which company to choose from. I have 7 radio buttons. Two are grouped in one groupbox the remaining 5 are grouped in a second groupbox. The two in the first groupbox are to chose whether to search by policy number or by firstname and last name. There are three text boxs. In the other group box is just radio buttons with list of companies to choose from with one radio button set to search through all companies. My problem is, how do I get my code to where I can choose to search by either policy number or by first name/last name and to then choose which company the person is with. Here is my code I have so far:
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Dim connetionString As String
[Code]....
Just finished this and figured I would share.. It just uses images, but works very well.. Have a couple work arounds in there so you can still bind it to a Class. Let me know what you think:
View 1 RepliesI have a Windows Forms application.I need some type of pop-up windows that will give the user a way to select one of several options.
View 1 RepliesI've created a structure as seen below:
Structure MemberType
Dim FirstName As String
[CODE]...
This was at the very top of my code. The gender data comes from radio buttons.
My code for adding user input into the structure is:
MemberArray(i).FirstName = txtFirstName.Text
MemberArray(i).Surname = txtSurname.Text
MemberArray(i).Gender = radFemale.Checked = False
I'm not sure about the last line re. data from a radio button. Does this say add to the structure only if the male radio button is checked?
My second question is how do I get data from the gender variable in the structure? I want to calculate how many Males versus Females have been stored in the array. I've tried all sorts of things, but nothing works.
Examples of faulty code / logic are below:
Private Sub btnAddtoStructure_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAddtoStructure.Click
Dim i As Integer
[CODE]...
I was trying to get a running total based on totalmales (and the same for totalfemales) and then display these results in another form.
I am creating a program to help tutor Paramedics students and the drugs they need to memorize during there classes. I have a form that presents to a student a Trade Name of one of these drugs and then they have a selection of 4 possible generic names to match to. These generic names are then presented to the student with 4 Radio buttons.I want all 4 of these Radio Button to be in Deselected mode when the form presents itself to the student with the Drug names.I have set all 4 radio buttons to "Checked=False", but when I 'F5' to test, the first button always comes up selected. I even tried to put in the Form_Load area,
Private Sub TradeGeneric_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.rbGenericName1.Checked = False
Me.rbGenericName2.Checked = False
[code]....