I have numerous buttons that add different values to a total score. In the future also wanting to keep track of which batter scores runs. I have 2 radio buttons labelled "BatterA" and "BatterB". When 1 run is scored the batters will change ends, so i want the radio button to automatically change to the other batter when the "1 Run" button is clicked.
View 5 Repliestrying to write a simple form for calculating professor's salaries depending on their degree and position.my problem is that the when i select a check box, the value is not being updated until i select a different radio button. it probably doesn't make much sense here,
Public Class frmMain
Private Sub optLecturer_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optLecturer.CheckedChanged[code]....
the values being assigned to my salary label are correct, but are not being updated until i select a new radio button. im not entirely sure how to get around this so that the value is updated as soon as i select the check box.here's when the program looks like:
I have run into a brick wall here with trying to figure this out what I have is a button that when clicked on opens up the windows control panel. and then options can be set and you then close the control panel.
then there is two radio buttons one says enabled and one says disabled what they do is check the registry after the button has been clicked on and depending on if the registry is set for 0 or 2 0 for disabled 2 for enabled...
I've tried various ways but I cannot get the radio buttons to check properly
I am new to VB 2005, and need help with use of radio buttons. I have two sets of radio buttons set up in my from, each set has three buttons. The problem is that when I run my program, it runs them as one set (i.e. I can only select one button in the form) I want to be able to select one button from each set, how is this done?
View 3 RepliesI have some experience with VB6 and it was easy to do a control array for radio buttons such that btnSMP(0) and btnSMP(1) and btnSMP(2) were together and if user clicked on btnSMP(1) it was shown with the blck dot on it as selected. If one then changed mind (which seems to be a very common thing) then if user clicked on btnSMP(0) then it was selected and the other one was not.That is not possible in Visual Studio 2008 for what ever reason the higher ups decided. I have read a number of articles now in MSDN about how to duplicate that feature in VB.net code but it seems to be a lot of work and they add in many features I do not have a need of
View 5 RepliesI have five groupbox control. each groupbox contain two radiobutton.
In groupbox1 if I select
radiobutton1 then I need to insert value as "Y"
or
radiobutton2 then I need to insert value as "N"
Likewise I need to do in all groupbox...........
I am making this thing to fool around, and it has a couple radio buttons, and a "apply" button...
Radio1 say's "A", radio 2 say's "B", and radio 3 say's "C".
All I want to happen is when I choose one of the radio buttons, and press the APPLY button, and I have notepad.exe open, it calls the keyboard key A,B, or C to be pressed. give me an example of keypress? Like IF I PRESS THE KEY 6(^), THEN....
I have a For Each loop going through the controls in a panel disabling them. When the loop reaches one certain grid control and disables it the CheckedChanged event fires for the next control in the loop which is a radio button.
The call stack is as follows:
System.Windows.Forms.dll!System.Windows.Forms.RadioButton.OnCheckedChanged(System.EventArgs e = {System.EventArgs}) + 0x15 bytes
System.Windows.Forms.dll!System.Windows.Forms.RadioButton.WnProc(Microsoft.AGL.Forms.WM wm = WM_RADIOBUTTON_NOTIFYVALUECHANGED, int wParam = 0, int lParam = 0) + 0x17 bytes
[Code]....
I don't understand how control.Enabled = False can cause the OnCheckedChanged event.
How can I stop that?
View 1 RepliesI have a gridview in wpf and have a two radio buttons and a button in template column. How do i access the status of radio buttons in the click event of the button?
<DataGrid>
<DataGrid.Columns>
<DataGridTextColumn Binding="{Binding TrackingID}" Header="TrackingID" Visibility="Hidden" Width="50" />
<DataGridTextColumn Binding="{Binding UserFullName}" Header="Name" Width="140" />
[code]....
I have created a program that has 5 radio buttons and each button is named after a city. When clicking these buttons a picture of a landmark of that city comes up. However, I would like to enable my "clear" button.I have found a couple of examples such as;
Private Sub Clearbutton_click' Clear previous amounts from the form.
Titletextbox.clear()
Pricetextbox.clear()
end sub
So is what I attempted to do is under my DetroitButton1 i did a
[Code]...
Ive got over than 120 groupboxes in my project which Contains radio buttons & Checkboxes control How can I save & retrieve the selection setting for these huge amounts of groupboxes when close my form and restart it?
View 16 RepliesI am having 3 radio buttons and a button The codes should be added to the button_click event, when ever the radio button is selected and the button is click then, The codes should determine which button is selected and assign it to a variable. Create a two parallel 1-dim arrays and populate it with the data below:
[Code]...
I am adding a series of RadioButtons to a GroupBox programatically. By default they are all placed on top of each other. So I use a bit of math to position them all nicely and then resize the GroupBox.
However I notice that the GroupBox has an AutoSize property, but it doesn't seem to be resizing as controls are added.
Is there a better way to position my radio buttons than to specify each one programatically? I mean, can't this stuff be handled automatically by the framework?
how do I assign my radio buttons and labels as a variable? I am doing a quiz project and i want my labels to be different each time with different answers to choose from. All of my questions and answers are on Access. I need to display them on my radio buttons and labels.
View 6 RepliesThe app I am trying to make needs a few info in the beggining, these questions include a radio button I have four radio buttons in the same frame and I want to change the grouping so there are two questions being answered
View 2 RepliesI have one radio button and one listbox .i want code for display listbox depends on the radio button check true and false.
View 3 RepliesI am using control groups per question and inside 5 radio buttons so they choose an answer. Its 25 questions and 5 questions per "page". On the same frame I just initially show the 1st 5 questions and as the student answers them and hit next hide those 5 and show the next 5. Here is where the problem begins, not a problem per-se but still bugs me. One of the next 5 questions will already be checked inside a control group for one of the radio buttons.
I have checked the properties and they all show on "Checked: False". Is there somewhere in code where I can make sure they are false or it may be the fact that I have 5 control groups on top of each other? Because I want the student to be able to show the next 5 questions only if he has answer the 5 being shown. Also the 1st 5 are never marked unless by user its only when I show the next 5 ones and hide the initial 5.
i have an if statement that neds to check if the control passed is a checkbox or a radio button
If TypeOf (Control) Is CheckBox Then
If count = 1 Then
text += Me.GetCheckBoxValueJQuerySyntax(Control.ClientID) & " + '~' + "[code]......
This fails as the checkbox and redio button derive from the same class, so how woudld i check if the control is a checkbox or a radio button.
I'm using a dialog form with two buttons and two Radio buttons.I'm oppening this Dialog when a button is clicked on the parent form.My situattion is when the Dialog opens the code in the button event continues to execute, but I only want it to continue to execute only after a button from the dialog form have been clicked
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If multipleEXT = 2 Then
Extension.Show()
[code]....
i have problem that i know once someone answers, i will kick myself, but here goes. i need to move the text next to the radio button to the left of the radio button, that part is easy just make sure the the "right to left" is maked yes, got it. but, the problem is i am making a seating chart and the seats are labeled 10-a, 10-b etc.... when the right to left is set to yes my text reverses and becomes a-10 and i can't seem to figure out what is set in the properties the is causing the alpha to be placed before the numeric.
View 2 RepliesI have two groups of RadioButtons, each group inside its own GroupBox. When a RadioButton from one group is selected, the handler passes the selected button - this is not a problem.
But I need to grab the value of the selected RadioButton from the other group as well - is there a simple way to do that without iterating through them all?
Could someone enlighten me on how radio buttons work?Is there a way to retrieve a single value from a group of radio buttons that indicates which radio button in the group is checked?
In the documentation, it said to set the "Group" property; however, my radio buttons don't have a group property, at least that I can find.
I realize that I could iterate through the radio buttons and find the one that is checked, but that seems like it defeats the purpose of radio buttons.
<DllImport("user32.dll")> _ Private Shared Function SetForegroundWindow(ByVal hWnd As IntPtr) As <MarshalAs(UnmanagedType.Bool)> Boolean End Function
[Code]...
I am creating a simple application to show an amount based on the radio button selected eg. radButton1=35 radButton2=75 radButton3=150, and another button to double the total IF selected. Here is my code so far, I do not get any calculation when the program is executed.[code]
View 2 RepliesMy VB application is behaving strangley. I have form with fairly large number of controls. I am using case against radio buttons. after curtain number of buttons, it stops responding to more radio buttons.
Then I tried to split controls in to 2 form but now my form.showdialog() too now working properly. It takes new from names but show the old form when running.
Basically I want to change a text if certain radio button is selected
Private Sub Form2_Shown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shown
If RadioButton1.Checked = True Then
Label11.Text = ("Boca Juniors")
End If
End Sub
I'm pretty sure the Form2_Shown is not correct but I dont know what else to put.
I want RANDOMLY click one of two radio buttons on a web page. Right now I only know how to click the last one... Also, the value of the radio controls changes every time. HTML Code of radio controls
HTML
<input type="radio" name="vote" value="ECA">Yes
<input type="radio" name="vote" value="ECB">No
[code]....
There is a radio button on a webpage, if the radio button is ticked I need the app to refresh page, if not then do other stuff.
This is the html of the radio box
HTML
CODE:
My problem is, I just finish creating a program, that loads a picture and description of a selection from a radio button.
Everything works on MY comp, but when i go to my lil sister comp and load the .exe file there, everything works too EXCEPT the image....the error is something along the line " C:documentspictures ame.jpg" not found.
My question is: how would I store the image to the program via another file or the program itself. so that when I "build" my program, I just need to run the .exe and lets say another file "for ex: .dll ", with all the images stored inside. And I dont know how to create and work with .dll file or whatever file is more convience.