Created A Program That Has 5 Radio Buttons And Each Button Is Named After A City?
Jan 29, 2009
I have created a program that has 5 radio buttons and each button is named after a city. When clicking these buttons a picture of a landmark of that city comes up. However, I would like to enable my "clear" button.I have found a couple of examples such as;
Private Sub Clearbutton_click' Clear previous amounts from the form.
Titletextbox.clear()
Pricetextbox.clear()
end sub
So is what I attempted to do is under my DetroitButton1 i did a
[Code]...
View 11 Replies
ADVERTISEMENT
Oct 10, 2011
trying to write a simple form for calculating professor's salaries depending on their degree and position.my problem is that the when i select a check box, the value is not being updated until i select a different radio button. it probably doesn't make much sense here,
Public Class frmMain
Private Sub optLecturer_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles optLecturer.CheckedChanged[code]....
the values being assigned to my salary label are correct, but are not being updated until i select a new radio button. im not entirely sure how to get around this so that the value is updated as soon as i select the check box.here's when the program looks like:
View 1 Replies
Nov 24, 2009
I have run into a brick wall here with trying to figure this out what I have is a button that when clicked on opens up the windows control panel. and then options can be set and you then close the control panel.
then there is two radio buttons one says enabled and one says disabled what they do is check the registry after the button has been clicked on and depending on if the registry is set for 0 or 2 0 for disabled 2 for enabled...
I've tried various ways but I cannot get the radio buttons to check properly
View 3 Replies
Mar 21, 2009
I am new to VB 2005, and need help with use of radio buttons. I have two sets of radio buttons set up in my from, each set has three buttons. The problem is that when I run my program, it runs them as one set (i.e. I can only select one button in the form) I want to be able to select one button from each set, how is this done?
View 3 Replies
Feb 18, 2011
I am making this thing to fool around, and it has a couple radio buttons, and a "apply" button...
Radio1 say's "A", radio 2 say's "B", and radio 3 say's "C".
All I want to happen is when I choose one of the radio buttons, and press the APPLY button, and I have notepad.exe open, it calls the keyboard key A,B, or C to be pressed. give me an example of keypress? Like IF I PRESS THE KEY 6(^), THEN....
View 1 Replies
Jan 19, 2012
I have a gridview in wpf and have a two radio buttons and a button in template column. How do i access the status of radio buttons in the click event of the button?
<DataGrid>
<DataGrid.Columns>
<DataGridTextColumn Binding="{Binding TrackingID}" Header="TrackingID" Visibility="Hidden" Width="50" />
<DataGridTextColumn Binding="{Binding UserFullName}" Header="Name" Width="140" />
[code]....
View 3 Replies
Sep 11, 2010
I am trying to create a simple paint program with radio buttons to change colors and size of the brush and draw within a panel on my form(VB 2008 Express).I cannot get the buttons to work. What do I need to put in the radion button event to change brush color and then also brush size? Following is the code I have so far, with nothing in the radio button events, because everything I try does not work.
Public Class PaintForm
Private shouldPaint As Boolean = False ' determines whether to paint
Private Sub Panel1_MouseDown(ByVal sender As System.Object, _[code]......
View 6 Replies
May 15, 2009
I am having 3 radio buttons and a button The codes should be added to the button_click event, when ever the radio button is selected and the button is click then, The codes should determine which button is selected and assign it to a variable. Create a two parallel 1-dim arrays and populate it with the data below:
[Code]...
View 10 Replies
Jan 2, 2012
I have a Data Repeater in a Windows Form, within the data repeater I have a label and either a radio button or combo box, the amount of radio buttons and the text for them is brought in from my database as is the label and combo box.
The label is a question and the radio buttons or combo box allows the user to answer the question.
What I want to do is get the checked status of the radio buttons so I can then reveal the next question if it is needed. e.g. only show question 2 if question 1 is answered No.
View 1 Replies
Nov 29, 2009
I have 1 project with about 7 forms. On each form I have 6 x 4 responses radio buttons (i.e. a multiple choice quiz). If the correct response is selected, the examinee gets 1 point, else 0. At the end of the quiz, the examinee can click a button that will add up all the correct responses & display the % correct. How do I program the button to do this given that data are on 7 different forms? [URL].
View 13 Replies
Feb 13, 2009
I have one radio button and one listbox .i want code for display listbox depends on the radio button check true and false.
View 3 Replies
Mar 14, 2009
I have a form that I am adding a set of buttons to. I am adding an event to those buttons. I need this event to function slightly to determine what button was pressed.
I need the button to simply set a string variable equal to the clicked buttons text so I can determine what button was pressed.
How can this be accomplished?
''Adding the buttons''
For Each dr In dtMenus
Dim strMenuName As String
strMenuName = dr.Item("strMenuName").ToString
[CODE]...
View 5 Replies
Oct 31, 2011
I have numerous buttons that add different values to a total score. In the future also wanting to keep track of which batter scores runs. I have 2 radio buttons labelled "BatterA" and "BatterB". When 1 run is scored the batters will change ends, so i want the radio button to automatically change to the other batter when the "1 Run" button is clicked.
View 5 Replies
Mar 17, 2009
how can i program the to radio button.
View 2 Replies
Jun 12, 2011
I'm using a dialog form with two buttons and two Radio buttons.I'm oppening this Dialog when a button is clicked on the parent form.My situattion is when the Dialog opens the code in the button event continues to execute, but I only want it to continue to execute only after a button from the dialog form have been clicked
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
If multipleEXT = 2 Then
Extension.Show()
[code]....
View 3 Replies
Sep 14, 2009
i have problem that i know once someone answers, i will kick myself, but here goes. i need to move the text next to the radio button to the left of the radio button, that part is easy just make sure the the "right to left" is maked yes, got it. but, the problem is i am making a seating chart and the seats are labeled 10-a, 10-b etc.... when the right to left is set to yes my text reverses and becomes a-10 and i can't seem to figure out what is set in the properties the is causing the alpha to be placed before the numeric.
View 2 Replies
Jan 16, 2010
I need to strip out part of a datafield namely Column name "City" the data provider adds an abbreviation to the end of the City name Example: Houston[HST] I need /want to strip out the [HST]been trying to modify my statement with no luckI am using Jet 4.o and database is a .txt or .csv file
OleDb.OleDbCommand("Select *, (([AddressDisplay])&',' &([City])&',' &([State])&',' &([ZipCode])) AS Address, IIf(IsNull([BathsQuarter]),0,[BathsQuarter]*.25)+ IIF(IsNull([Bathshalf]),0,[Bathshalf]*.5)+ IIf(IsNull([Bathsthreequarter]),0,[Bathsthreequarter]*.75)+ IIf(IsNull([BathsFull]),[BathsTotal],[BathsFull]) AS BATH From " & Me.OpenFileDialog1.SafeFileName & " Where ListStatus <> 'Closed Sale'", con)
View 13 Replies
Aug 18, 2010
My problem is, I just finish creating a program, that loads a picture and description of a selection from a radio button.
Everything works on MY comp, but when i go to my lil sister comp and load the .exe file there, everything works too EXCEPT the image....the error is something along the line " C:documentspictures ame.jpg" not found.
My question is: how would I store the image to the program via another file or the program itself. so that when I "build" my program, I just need to run the .exe and lets say another file "for ex: .dll ", with all the images stored inside. And I dont know how to create and work with .dll file or whatever file is more convience.
View 4 Replies
Jan 17, 2011
My VB application is behaving strangley. I have form with fairly large number of controls. I am using case against radio buttons. after curtain number of buttons, it stops responding to more radio buttons.
Then I tried to split controls in to 2 form but now my form.showdialog() too now working properly. It takes new from names but show the old form when running.
View 7 Replies
Mar 3, 2011
i have created a program which has a zoom split button. for single click zooming and percentage zooming, basically when i click the single zoom(can click forever to zoom) and clear the image, the picturebox size goes to a very small size, where as the default setting of the picture box is 590,649. is there anyway of writing abit of code so that when i clear the image after clicking the zoom button the picture box does not change when image is erased. i am working with vb.net. please help its completly thrown me. just to add i have a panel and picture box because on some zooming percentages i have scroll bars so you can pan the image by clicking and dragging mouse.
View 2 Replies
Feb 7, 2010
I just want a program compiled in Visual Basic 2008. which can just submit a form of only one field. the form is already uploaded to the server but i don't want to go to that url every time to do so.What I want here, just to open application and fill that field and submit. Is this possible in visual basic 2008?Also let me know how to create a button that can rapidly submit the form repeatly untill the second button named cancel is pressed.
field name of that form is "msisdn" and the action on submit button is post method and url in target is url...
View 1 Replies
Sep 4, 2011
I have but a vb project and i have but 5 buttons on the main page i am trying to have so when you click on the button it will install an exe map program.
View 4 Replies
Jun 8, 2011
im trying to add two radio buttons together to get a full price, they are split up by two group boxes. Meals and dormitories, I have the prices on how much they are, but I dont know how to put the right radio buttons in the right places and then add them up, here is the code I have so far
Public Class Form1
Const decRadioButtonmichigan As Decimal = 1500.0 ' this is suppose to go in the dormitories group box
[code]......
View 7 Replies
Mar 10, 2010
I am trying to figure out how to use radio buttons.when the radio button is selected it should display a integer number in the text box.
This is what i have so far[code..]
View 4 Replies
Mar 11, 2010
My homework is the following: public Class Form1
[Code]...
View 11 Replies
Oct 26, 2009
I have a need to add 16 radio buttons to a groupbox but I want to be able to select 2 radiobuttons per groupbox. (2 vertical columns of 8 radio buttons each) The radiobuttons are created dynamically and each set of eight have different names to distinguish them. Do I really have to create 2 groupboxes and put each set of 8 in each groupbox and put those groupboxes into my parent groupbox? Is that it with radio buttons...if they are all in 1 groupbox then there is no way to select more than one at once?
View 1 Replies
Feb 25, 2009
I'm having issues with my current homework. I've got 6 different radio buttons and depending on which one is checked, the corresponding price shows up in the text box. I'm not sure if I need to create a sub-procedure or what. I can't seem to get anything to work.
[code]...
I've gotten this far with the code but not sure where to go next.
View 3 Replies
Aug 25, 2011
I've figured out how to run through the radio buttons and save their checked status to a text file. Now Im trying to recheck them according to the value. Here is what I have.[code]...
View 1 Replies
Feb 27, 2009
Is it possible to create a list of radio buttons similar to that of a checked listbox?And the list of radio buttons should be able to be managed like that of a CheckedListBox?
View 2 Replies
Feb 26, 2009
I have several textboxes in my form and a groubbox that have four radiobuttons. I want all the values of the textboxes (and the selection of the radiobuttons) to be stored in sql server. As far as the values of the textboxes in concerned, I managed to do it. But what about the selection of the radiobuttons??? This is the code I am using for the textboxes:
objConnection.Open()
objDataAdapter.InsertCommand = New SqlCommand()
objDataAdapter.InsertCommand.Connection = objConnection
[code].....
View 6 Replies
