i have a application windows based created in vb.net that contains crystal reports and access .accdb files. to be honest i have tried to publish this app for 11 times and still there to be some problem. the application will install but it cannot run. it shows an error like this.
Problem signature:
Problem Event Name:CLR20r3
Problem Signature 01:utm point of sale software.exe
[code].....
I'm typing this up only to document it and possibly save others the three days of frustration and hell I had to go through. Because this unhanded exception was damned near untrappable (it happens on Form.Show(), but since my primary form was affected, I couldn't tell at the time), it's one I know I lost a lot of hair nailing down.
I have an office application. Standard fare utility program that grew to do lots of custom tricks for my place of business. Lots of database providers to pull data from various unconnected sources and crystal reports to make fancy reports from it all.
When I make a change or addition to it, it usually is only needed by one employee, so I only deploy the new version to one computer at a time. Recently, I had to reinstall the program to the whole company. Everything was going fine, until somebody who had a Windows XP machine tried to run it. It was giving a "clr20r3" "System.InvalidOperationException" on program boot. None of my Try-Catch blocks were catching it. Any Windows XP machine I installed it on was failing, and any Vista/Win7 machine had no issues at all.
I spent the next three days trying to catch what was causing it, pulling out references, reinstalling .NET. Searching for references to this error online was futile since System.InvalidOperationException is one of those ultra-generic errors that pop up for hundreds of oddball reasons.
Finally, by happenstance, I found the cause via a single, obscure post on TechArena by a poster with only that post to his name who decided to chime in with his two cents on someone else's System.InvalidOperationException problem.
About a month ago, I replaced the program icon with a new one. I made up a nice Icon, and compiled pre-sized versions of it into a proper .ICO file from 16x16 all the way up to 256x256. I replaced the program icon with it, the links to the shortcuts in the setup program, and the icon on the main form.
THAT was the bug. Because my .ICO file had sizes larger than 64x64, Windows XP couldn't handle it as a form icon! It works fine for the program icon and for the shortcuts, but the form icons MUST be 64x64 or smaller or the program will throw System.InvalidOperationException on Form.Show(). I didn't know this was the issue since this change was over a month old and I hadn't needed to upgrade a Windows XP machine in that time. Windows Vista and 7 can handle large icon files just fine!
Solution, I made a second, WinXP compliant icon just for the main form. Problem solved. My big icon is still used for my program and shortcuts, so they look great scaling to max size in Windows Vista/7 and XP no longer crashes with a cryptic error message.
Event type clr20r3 p3 4a5c12c0 system.net.sockets.socket Exception and Application crash on some system. while running well on others. i go thorugh many forms and search a lot on google but not able to resolve the issue.
[Code]...
Installing an VS 2005 application on a Windows 7/64 box. For some reason I am getting a CLR20r3 event with a System.InvalidOperationException, which basically crashes the application before it can't even open. Any thoughts on what could cause it? I thought maybe it had something to do with the C++ 6/VB 6 runtime libraries that a component add on I use need. Tried getting the latest but still same error.
View 1 RepliesI've spent a substantial amount of time trying to figure this out, but I keep getting the same error
A first chance exception of type 'System.Data.OleDb.OleDbException' occurred in System.Data.dll
A first chance exception of type 'System.NullReferenceException' occurred in project1.exe
This happens when I try to use the DataReader.my code is
Public Function Identification() As List(Of Integer)
Dim returnIndex As New List(Of Integer)
Dim dbCount As String = "SELECT Bookingid FROM bookdetail WHERE Date =" & getCurrentTimeString() & " 12:00:00 a.m."
Dim count As Integer = 0
[code]....
i am trying to connect to an MS Access database and I am getting an erro message on the following line of
searchtable_command = New SqlClient.SqlCommand(searchtable_string, testsearch_connection)
Error:'System.Data.Odbc.OdbcConnection' cannot be converted to 'System.Data.SqlClient.SqlConnection'.
Here my connection string:
Dim testsearch_connection As New Odbc.OdbcConnection("Provider=MSDASQL;Driver={Microsoft Access Driver (*.mdb)};Dbq=C:CesarAccessdatabase.mdb;Uid=admin;Pwd=;")
What am I missing?
Do While rdr2.Read()
Dim var1 As String = rdr2.Item("Week").ToString
Dim var2 As String = rdr2.Item("L1").ToString
Dim var3 As String = rdr2.Item("L2").ToString
It generates the following error: A first chance exception of type 'System.Data.SqlServerCe.SqlCeException' occurred in System.Data.SqlServerCe.dll
Interestingly, if I use a numeric value for the variable it for LSArraytemp, it writes to the database no problem at all.
I am using VS 2008, Office 2007, and Win7 Home Premium on my system.I have a simple application which should be a breeze to build. All I am attempting to do is pull data from an Access database with four small tables into a data grid on a windows project. Should be simple, set up the data connection, choose a datagrid from the table in the data source view, drag it onto the page and done, right?I can't get it to work. It will all work fine until I attempt to run or debug the project. The data will not show up. The data grid does, but I get this error: A first chance exception of type 'System.InvalidOperationException' occurred in System.Data.dll
As I said, the project seems to build fine, but it will not pull the data. After the initial build I get the message that Windows will show this page in Compatibility View. Is it something with Win7 Home Premium, or a setting somewhere?
I have a windows service written in .NET 2.0 that will run every 5 minutes and executes bunch oracle SQL/PLSQL scripts based on time/validation, it throws the above said error some times against some SQLs, the same SQLs run fine at later point without any error, I have no idea what is going on with the app. I am not sure if this has any thing to do with oracle connection pool as I am properly closing the connections after every SQL execution.
Exception:
System.Exception: Unexpected return code: 1 at System.Data.OracleClient.DBObjectPool.GetObject(Object owningObject, Boolean& isInTransaction) at System.Data.OracleClient.OracleConnectionPoolManager.GetPooledConnection(String encryptedConnectionString,
[CODE]............................
How can you add a image where when you double click on the icon and the program starts it shows a picture before the program loads. Like Photoshop startup or the new 2010 visual Basic express start up
[Code]...
I'm writing an application that imports and tidy up address data into a cleaned, deduped excel workbook ordered in rows with each column as an address field. One of the issues I've ran into is that we sometimes get a workbook where the multiple address fields are held in a single cell with line breaks. I've written code to extract all of this data out of the excel sheet in to a dataset with each sheet as a table and the address fields contained within. I now want to create a new Excel workbook from this data with the address fields in Row and columns the problem I have is I can Open/create the Workbook but when I try to insert a new Sheet (Table) I get an error saying the Workbook is read only....
Private Sub MakeSimpleXL(ByRef DsTemp As DataSet)
Dim dsTable As Data.DataTable
Dim tblName As String
Dim dsRow As Data.DataRow
[CODE]...
Here is the error: System.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC Excel Driver] Cannot modify the design of table '3 _ 10$'. It is in a read-only database. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String
[CODE]...
It looks to me like it is trying to create the table (Sheet) but has the workbook opened as read only....
Well I want to make a log-in system that loads the .txt files from your server (Simular to this code:
[Code]...
I am trying to perform a simple bound connection between an Access database and a text box on a form. This is actually Chapter 18 of the "Microsoft Visual Basic 2008" book.I get the same error message when trying to create my own project "MY ADO Form" or the "ADO Form" project supplied from the DVD provided with the book. I am running the 90 Day Trial Version of Visual Studio 2008 with SP1 and Net 3.5 SP1.
My operating system is the 64 bit Version of Vista with all updates.The error when I try to run the application in the debug mode is:"A first chance exception of type 'System.InvalidOperationException' occurred in System.Data.dll"and as a result no data shows up in the text box from the database and the data selection bar is grayed out in the form. The underlying database "Students Data Set" appears to be fine as I have seen the correct data for the fields "Instructor" and "PhoneNumber" prior to running the program and when connecting with the database.
I have an InvalidCastException Error in my program. The program is that i try to insert an employee record into a database table after getting the details from a form. I've used Money data type is SQL Server for salary and SqlTypes.SqlDecimal data type in employee template class. i've used a stored procedure to pass the values and i add the basic value by passing a parameter by the method
Dim prm8 As SqlParameter = com.Parameters.Add("@basic", SqlDbType.Money)
prm8.Direction = ParameterDirection.Input
prm8.Value = emp.Bsc
I've used the money datatype itself even in the stored procedure variable.I get the following error.
failed to convert parameter value from sql decimal to decimal
Even if i use
prm8.Value = Convert.ToDecimal(emp.Bsc)
I get an error Unable to cast object of type 'System.Data.SqlTypes.SqlDecimal' to type 'System.IConvertible'.
I can't get past this error in my loop through the data reader specifically dr(12). I tried adding .To String but that doesn't seem to work either. Can someone help me with what need to do so it can read even if there is a Null value. My code is below:
While objDataReader.Read()
'Set up DataRow object
Dim dr As DataRow = DataReaderTable.NewRow
[code].....
I am getting this error when I am tring to load string type to data table)
Using connection As New SqlConnection("connectionstring;")
connection.Open()
Using Command As New SqlCommand("SELECT ClientId,forename,surname from t_clientdetails
[code].....
I get the below error Unable to cast object of type 'System.String' to type 'System.Data.DataTable'.This is the code I'm using
Dim str As String = String.Empty
If (Session("Brief") IsNot Nothing) Then
Dim dt As DataTable = Session("Brief")
If (dt.Rows.Count > 0) Then
[code]....
I'm making a program that will patch a program with a new Exe. Its all working with this code
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles patch.Click
patching = True
[CODE]..........
I get an "Could not find file 'System.Byte[]'." error.
I'm trying to run a simple database and im getting a "System.NullReferenceException" error ) & "Additional Information:Object reference not set to an instance of a object" .
txtItemName.Text = rowCurrent.Item("ItemName") <-- highlighted in yellow
Code is as follows:
vb.net
Imports System.Data.OleDB
----------------------------------------------------
Public Class Form1
[code]....
Public Sub ReadSample()
Me.Focus()
Do
Application.DoEvents()
[code]....
When i put:
Private Sub ThinkSec_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
ReadSample()
End Sub
The application wont start.But when I put the sub to run when clicking button, it works.Why?I've tried all do until, while, for etc variations to get it correct but i have no success.
I was working a To-Do-List project. Everything is fine, but, program not saves list group view.
Before save (with groups)
Restart Program (no groups)
Program loads list without groups. How to load with groups?
Every time vs 2008 loads a projects this error message always display? What will be the effect of this in my development?Im running on Windows 7, 64bit..
View 4 RepliesI am writing a program where the user has to log in before the program loads. Right now I have all the users and passwords hard coded into the program. Recently I have written a Oracle function that the username and password is sent to the DB and a yes or no is sent back after comparing the passwords. I am getting the correct response back and it will display in a label (I tried it to make sure the response is correct). The problem I am having is that the program after receiving the response doesn't recognize the response so I always get an incorrect password error.
Below is my code:
empName = tbxUser.Text
passWord = tbxPassword.Text
dbConn.ConnectionString =
"Data Source=!!!!; User Id=!!!!; Password=!!!!"
[Code] .....
I have a screen with a listview. I can populate the listview when the program loads. But when i add or delete data the listview is not updated. Here is part of my code
Sub RefreshScreen()
Try
dt = New DataTable
[Code].....
I am working with Wizard generated dataset. I added this code to a button for update:
transDetailTA.Update(abars.TransactionDetails)
I'm making the changes to a datagridview bound to one of the tables in my dataset and when I make changes and click the update button i receive the following message even though I'm the only one using the DB (I'm working on a laptop):
System.Data.DBConcurrencyException was unhandled
Message="Concurrency violation: the UpdateCommand affected 0 of the expected 1 records."
RowCount=1
[code]....
Im using datagridview in asp.net.When im trying to add row using footer template in find error coming up.I have corrected syntax and column is in Database.
<ItemTemplate>
<asp:Label ID="lblMembershipName" runat="server" width ="150px" **Text='<%# Eval("MembershipName")%>' >** </asp:Label> </ItemTemplate> <EditItemTemplate>
[Code].....
Im using datagridview in asp.net.When im trying to add row using footer template in find error coming up.I have corrected syntax and column is in Database.
<ItemTemplate>
<asp:Label ID="lblMembershipName" runat="server" width ="150px" **Text='<%# Eval("MembershipName")%>' >** </asp:Label> </ItemTemplate> <EditItemTemplate>
[code].....
VB EXPRESS 2008. I am getting random Users that are receiving this error during install? for some, if they reboot, it works...for others no good.
I have looked and tried all sorts of things.. made people go to net 3.5 sp1, removed the add desktop shortcut, removed all unused refs.. etc etc..
I can seem to make it stop? I have read it has to do with the OneCLick? what is that? can I just turn it off?
When I am trying to connect to database from VB.net, I am getting error.
This is my code.
Public g_Conn As new SqlClient.SqlConnection
With g_Conn
.ConnectionString = "user id=sa ;data source= CCTSRV8; " & _
"persist security info=True; " & _
"initial catalog=pubs ;password=mrwizard"
.Open()
End With
I am getting system.data.sqlclient.sqlclientpermission error.
I've been trying to highlight a search result in DataTable. First, I loop through rows of DataTable and call a function to look for a matched keyword to highlight those words, then update DataTable row with a new string with highlighted keywords.I bind the DataTable dtResult to the DataList. It worked fine until I added this code block to SearchDemo function to highlight the keyword :
For i = 0 To dtResult.Rows.Count - 1 Step 1
Dim strTemp As String = dtResult.Rows(i).ToString
strVerse = blHelper.Highlight(s, strTemp)
[code].....