Using VB2008 I need to create an application that calculates and displays a customers bill.Business customers must have one connection.
Heres the data
Residential customers:
Processing fee: $4.50
Basic service fee: $30
Premium channels: $5 per channel
[code]....
I'm having trouble figuring how to code the calculations for a Pocket PC application that calculates the cost of a cell phone bill. From a Pocket PC the user should enter the number of minutes used during the past month, in order to calculate the cost of the cell phone bill. The plan allows 300 minutes for $29.95 per month. For each minute over 300 the cost is $0.17 cents per minute. Tax and Fees are $4.85 a month.
1. User enters the number of minutes used during the past month.
2. Based on plan rate of 300 minutes for $29.95 and 17 cents for each minute over 300 calculate the cost of the bill including the fixed cost of $4.85.
3. The user must be able to initiate the calculation and display the individual charges and the total cost of the cell phone bill.
4. The user should be able to clear the number of cell phone minutes, the individual charges and the bill total
If negative number is enterd for the cell phone minutes, the user should be advised and asked for a valid entry If non numeric value entered for the cell phone minutes, or if left blank the user should be advised and asked for a valid entry.Application is deployed on the Pocket PC emulator built in VS 2008
Enter # of Minutes ________ (user enters)
Regular Minutes Charge ___ (29.95)
[code]....
I have created an application that calculates and displays the quarterly payment on a loan but when i run the application the paymnet amount is showing with () around the amount I can't figure it out.
[Code]...
In this program I am suppose to use data to compute a customers electric bill. My code works correctly for the most part except for two things. I cant get the loop correct I want it to ask the customer to enter readings but once it does it outputs the same information from the original time so I am wondering what I have to do to have it recalculate when new values are entered by the customer. My other issues is it is suppose to continue to ask the customer for additional readings till the value entered by the customer is -99999, when I run my program and enter -99999 it does not stop.
[Code]...
I am trying to write a program that compute the bill for a pizza shop and I cannot figure out what I am doing wrong when I build it there are no errors but when I debug it it will not run [code]...
View 4 RepliesI have an application I am creating that displays pump information based on customers in a database. I am using VB2008 .NET3.5.I have a combobox that has a selection for a unit of measure. What I want to happen is when that is changes the labels that have a unit of measure change to reflect the change. There are 15 labels total that need to be changed and all there names are the only ones in the project that start with a X if that helps at all.
I would like to avoid creating a bunch of labels and changing the visible property and just change the text value of each one. I have just started learning VB.NET
Create an application that calculates the total cost of a stay in a hotel in the North Carolina mountains. The application should accept the following in terms of input:Month of Check in Length of Stay (in Nights) Number of Persons Room Service Charges Phone Charges Other Charges If the check in occurs in November-March the rate is $89/night. April-August is $99/night and September-October is $109/night. $10/night should be added if more than 2 people are in the room. More than 4 people are not allowed in the room, and a traveler can only request 1 room. A 15% tax should be added to the room rate and 10% tax added to all room service and other charges. No tax will be added for phone charges.
The program should use a function to calculate the total charges for the visitor's stay and output it to a label. There should be buttons or menus to calculate the total, clear the form, and exit the application.At least one of the button should call a sub procedure which performs its function. I don't understand how to set this program up and I'm not sure what it means.
I am working in Visual Basic 2008 and am trying to create an application that calculates body mass index. I have the entire form complete as well as much of the source code, but I am having trouble creating the code for input validation. On the form I have a text box for entering weight and a text box for entering height, which are both used to calculate the body mass index. Therefore, both text boxes input information cannot be negative or an illegal character ( $, @, !...) The input validation is supposed to present a Message Box that displays something along the lines of "Please enter numeric values" when input values are illegal characters "Please enter a positive number" when input values are negative "Invalid Entry" when input values equal 0
Here is my code:
Private Sub btnCalculate_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCalculate.Click
' Declare local variables
[Code].....
create an application that calculates the registration fees for a conference. The general conference registration fee is $895 per person. The is also an optional opening night dinner with a keynote address for $30 per person. additionally, the optional preconference workshops listed in table 7-16 are available. [code] When the user clicks the select conference options button, it should display the conference option form the conference options allows the user to select the regular conference registration, the optional opening night dinner, and an optional preconference workshop.(the user cannot register for the optional events, however, without selecting the conference registration of $895.) when the close button is clicked the conference form should be removed form the screen and the total should apper on the main form. [code]
View 1 RepliesThe hotel has 8 floors and 30 rooms on each floor. Create an application that calculates the occupancy rate for each floor, and the overall occupancy rate for the hotel. The occupancy rate is the percentage of rooms occupied, and may be calculated by dividing the number of rooms occupied by the number of rooms.When the user clicks the "Complete Report" button, a loop should execute and iterate 8 times. Each time the loop iterates, it should display an input box for one of the hotel's floors. The input box should ask the user to enter the number of rooms occupied on that floor. As the user enters a value for each floor, the loop should calculate the occupancy rate for that floor, and display the information for that floor in the list box. When the number of occupied rooms has been entered for all the floors, the application should display the total number of rooms occupied and the overall occupnacy rate of the hotel.I have some of the code but I'm not sure which way to go now!
[Code]...
The program is a hotel occupancy form The Hotel has eight floors and 30 rooms oneach floor. I'm supposed to create aapplication that calculates the occupancy rate for the hotel. Theoccupancy rate is the percentage of rooms occupied, and may becalculated by dividing the number of rooms occupied by the number ofrooms. For example, if 18 rooms on the first floor are occupied, the occupancyrate is: 18/30 = .6 or 60%. The form has two out labels called totalrooms occupied and overall occupancy rate that holds two output text boxes todisplay the numbers
its only three buttons Calculate report,close, and exit Its obvious what the exit buttons issupposed to do the clear button should clear all the controls on the floor
Now the complete report button is supposedto loop and iterate eight times. Each time the loop iterates, it should displaya input box for one of the hotel floor. The input box should ask the user asksthe user the user to enter the number of rooms occupied on each floor. As theuser enters a value for each floor, the loop should calculate the occupancyrate for that floor and display the information for that floor in a list box.When the number of occupied rooms has been entered for all floors theapplication should display total number of rooms occupied an overall occupancyrate for the hotel. (the hotel has a total of 240 rooms total)
[code]...
I need to write a program that calculates and displays the depreciation of a businesses assets.I need the program to read a comma-delimited input file containing the names of multiple assets, their purchase prices, the years of their purchase and the number of years that the assets are expected to be useful.I need to use this straight line depreciation formula- (purchase price / number of years of usefulness) * (current year �purchase year)
View 7 Replies[Code]...
how to do this. kindly show me some sample code for this
Trying to create a restaurant bill, i found a program that does something similar but when i tried to adapt it, it doesnt do what it is supposed to.Let me go over what it's supposed to do first.If there are three items on a menu, lets say; pizza, fries and drinks. the pizza costs $1.75 a slice, the fries are $2.00, and the drinks are $1.25. the user selects how many of each are purchased, then presses a 'compute' button and displays a bill in a listbox. here is the code i wrote for such a program, obviously wrong or it'd be working.
Public Class RestaurantBill
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnCompute.Click
[code]....
We have a rather large VB.NET accounting application that crashes occasionally for some customers. I have now been able to reproduce this particular almost 100% in my test nvironment using certain data. The crash happens when clicking a list box after printing a report. The form involved has a list box listing available reports. You select one or more reports from the list box and click the print button. After printing, if you click the list box again, the program crashes, with an exception that does not seem like one VB.NET should even be able to produce.The exception message is: "Attempted to read or write protected memory. This is often an indication that other memory is corrupt."The call stack is:
1. System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr wndProc, IntPtr hWnd, Int32 msg, IntPtr wParam, IntPtr lParam)
2. System.Windows.Forms.NativeWindow.DefWndProc(Message& m) [IL offset: 0x3e]
[code]....
I am creating a form that calculates QB Ratings but its not coming out right. The formula is found here
My code:
Dim a, b, c, d As Integer
a = (Comp.Text / Att.Text * 100 - 30) / 20
b = (Yards.Text / Att.Text - 3) * 0.25
c = Tds.Text / Att.Text * 20
d = 2.375 - (Int.Text / Att.Text * 25)
Rating.Text = "QB Rating:" & ((a + b + c + d) / 6) * 100
Number set 1:
22 complete
36 Attempt
2 touchdowns
0 Interceptions
229 yards
It should come out 98.0 but comes out 100
Number set 2:
16 complete
37 Attempt
0 touchdowns
3 Interceptions
205 yards
It should come out 27.4 but comes out 33.3
VISUAL BASIC 2008. Program Description: Create a program that calculates the amount of quarters, dimes, nickels, and pennies are needed from an amount of change (entered in pennies). The program should use the largest coins possible (for example, fifty cents should use two quarters, not five dimes, fifty pennies, etc.)
I don't want the code already written out, I need somebody to walk me through making a code. Also, this is my first class dealing with computer programming so all we've learned so far is declaring variables and how to label objects, the simple stuff. I'm at a loss at how to start because a quarter is worth 25 but the program is supposed to show how many quarters once a user enters the amount in cents.
I'm creating an application that calculates render times for Maya. I kinda got bored of coding all the technical stuff so I started to mess around with the interface. I'm trying to create a combobox color picker.
View 5 RepliesCreate an application that calculates the total cost of a stay in a hotel If the check in occurs in November-March the rate is $89/night. April-August is $99/night and September-October is $109/night. $10/night should be added if more than 2 people are in the room. More than 4 people are not allowed in the room, and a traveler can only request 1 room. A 15% tax should be added to the room rate and 10% tax added to all room service and other charges. No tax will be added for phone charges.
The program should use a function to calculate the total charges for the visitor's stay and output it to a label. There should be buttons or menus to calculate the total, clear the form, and exit the application. At least one of the button should call a sub procedure which performs its function. [Code]
I need to create Encrypted "PayNow" paypal buttons on the fly for a website. I read all the documentation I can find on the paypal website. I understood that I need to use the BMCreateButton ButtonManager NVP API. But I've been unable to find any information, nor any reasonably simple and documented sample code, about HOW I'm supposed to call these API.
[Code]...
I created a new WinForm application then dragged a notify icon onto my designer. I coded my desired functionality for the NotifyIcon's behavior inside the Form1.vb file.I think I remember something about adding a module to the project, and setting the project to launch the aforementioned module instead of the form...but I can't figure out/recall how to keep the functionality I've coded into Form1.vb.
View 1 RepliesI'm creating a program for school coursework which serves as an online ordering system for a local carry-out. I need to create a menu interface which displays all the items, where the user clicks on their choice, enters the quantity desired and then its added to a list box.
[Code]...
I'm using Visual Studio 2010 Express Edition - Visual Basic.I'm very new to VB but I would like to create a program / splash screen that displays a list of files (Word, Excel, Project) that are located on a CD. I'm not sure how to start other than starting out creating a new project.
Here is how I would like the program to work. The user inserts a CD-rom (containing the program and a folder with all the files) the program automatically starts up when the CD is inserted and it displays a list of all the files on the CD. The user can click any of the files to start the program that created it. Example, if we have an Excel file called "Work Schedule", the user could click it and it would open in Excel.
After I've created the project and have a form, I'm not sure what tools I need to use to display the list of files.I'm not sure how I set up the connection (path) between the program and the folder containing all files, especially as they will all eventually be located on the same CD.
I am having trouble with my code for Guess my number. I am definitely amatuer. Yes it is a homework assignment. No I am not asking you to do it for me. But I am stuck.Your GUI program is a game to be played by the user. See Screen Shot on Screen Shot Tab..A new employee is working on a classified mission and the program will randomly pick an expected profit to be guessed by the user.The program must randomly select an number within the range of 1 to 900.Do NOT use a 'Start Game' button to generate the rand number. Generate a rand number when the GUI is loaded.
1. Create a form that displays the rules of the game on a label.
2. Create a textbox for the user to input the guess and also a 'guess' button.
3. If the user is outside the given range, provide a proper message (<1 Is not a valid guess or >900 is not a valid guess)and clear the guess.
4. When a user has a valid guess, display a proper message (either too high or too low) and tell the user to guess again.
5. With a correct guess, display a proper message and change the form's background color to red and disable the guess textbox.
6. Create a reset button that allows the user to play the another game with a new random number.
7. Create a show me button that displays the number and does not generate another random number (allow the current game to continue).
8. Create a exit button to exit the program.
9. Ensure that you include error checking to prevent a user guess that is out of the given range and for any non-numeric characters.
10. Create a single Help menu item that launches a message box that displays valuable and meaningful information for the program and usage.
11. Create a label that tracks the guess count per game. Each time a new number is generated, start the guess count at 0.
12. Create a max guess limit set to 5 and use a progress bar to track the progress to approach the limit.
13. After each valid guess (1-900), clear the guess and update a label/textbox that displays all of the previous guesses up to 5 entries.
Here is my code so far. I have been working on one point at a time and then testing it. I have not even made it to numbers 11 - 13. I am not getting actual errors. Instead of my reset button clearing all fields at once I am having to click it more than once. Instead of displaying messages per scenario the message label is staying on either input a number or your number is too low. My Answer is not displaying when Show answer is clicked-perhaps my answer coding is wrong? [code]
I have been asked to create a program that displays the height of 3 diffrent people via a scrollbar. The problem i'm having is i don't know the code for getting the total from the scrollbar to display on the height labels .The labels are named lblheight1 lblheight2 lblheight3 Scrollbar is named vscheighttotal?
View 5 RepliesI have to create program that adds the whole numbers from 1 to 1000 and displays the sum in the label. Create a variation of this program that allows the user to specify any starting whole number and any ending whole number (10,000 or lower) and then adds all the whole numbers in that range. Allow for the possibility that a user may start with a high number and end with a low number. Format the label so that commas are displayed and there are no decimal places showing. I need help with the codes.
View 5 Repliesprogram a little begginner project. So I want to create a program that displays an image when you press the start button. When you press the "Next button" it will display a new image.My problem is, I want the image to change EVERY time you hit the next button.
[URL]
I have created a program that takes a users input of a bunch of fields. Now what i want to do is create a word document using the information that was entered so users can print a page with the information and save it as well.
View 1 Repliesthe code i have that interacts with e.graphics is
'clear area
e.Graphics.FillRectangle(Brushes.Black, 0, 0, 600, 800)
'draw sand
[code]....
here are the variable areas of my two classes, along with their new functions; assume that the get lines do what you think they do.
Public Class Sand
Private x As Integer
Private y As Integer
[code]....
I have a small Windows Application that displays a .chm Help File when F1 is pressed. What I would like to do is to close the Help Display programatically for example when a Reset Button is clicked and the Form is 'Reset'.
View 2 Replies
