Creating Controls At Run-time?

Jan 11, 2010

Let's say I wanted to create 3 panels(Panel1, Panel2, Panel3) at runtime, and create a label(Panel1Label, Panel2Label, Panel3Label) inside each panel. This far I know how to do it.

The problem arises in that I don't know how to write a Sub for the event of clicking one of these run-time created Panels or Labels. When I try with

Code:
Private Sub Panel3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Panel3.Click
...it tells me "Handles clause requires a WithEvents variable defined in the containing type or one of it's base types"

Also, if someone could teach me how to use some kind of array to create these controls at run-time, I'd love it, considering I may need to create up to 50 of them at some point.

View 2 Replies


ADVERTISEMENT

NumericUpDown Controls - Update Some Variables Each Time One Of These NumUD Controls Changes Value

Nov 20, 2011

I've got a couple of these NumericUpDown controls I put on a form. Without describing too much about the form I basically want to update some variables each time one of these NumUD controls changes value. So for each NumUD I have a call to a Recalculate subroutine within their "changedValue" event.

There are actually two problems. First, if I initialize the "Value" property to something other than zero in VB2010 at DESIGN TIME it won't even open the form when I hit RUN. It gives me a "No Source Available. No symbols loaded for any call stack frame" error. The error box says "InvalidOperationException" was not handled. So if I try to set the initial value of the Value property to anything but zero of either I get this error.

[Code]...

View 7 Replies

Container Controls Access Controls At Design Time?

May 13, 2009

I've been building controls for many years professionally and personally, but even back in VB6 days I just could not work this out. After all this time I remembered about it again.If I create a usercontrol/containercontrol and add one or more controls to the controls surface, I just cannot figure out how to access the controls at design time.

View 4 Replies

.net - Re-Creating Dynamic Controls?

Nov 5, 2011

I have a VB.Net WinForm Program. I dynamically create panels with controls.Each panel has:

2 Labels
1 DataGridView
1 Button

Everything works fine the first time I create the panels.

Everything gets created, and everything is functional.

If I have to re-create the form, I get rid of the existing panels (and their controls) with this code:

[Code]...

When I re-create the panels, I get the panels and all of their controls except Buttons.When I step through the debugger, I see the buttons being removed, and I see them being created, but they don't appear in the panel

View 3 Replies

.net Programmatically Creating Controls?

Jan 7, 2012

It seems that when I'm online the following code I see is used interchangeably:

Dim x As Button
Dim y As New Button()

or even

Dim z As New System.Windows.Forms.Button()

Does it matter how I declare the variable?

View 2 Replies

Creating An Array Of Controls?

May 19, 2009

I need to be able to refer to a set of controls on a Windows form using an array, but I'm having a few difficulties.

The Windows form (WForm.vb) contains two textboxes (TextBox1 and TextBox2).

In Module1.vb I have created an array reference to the textboxes thus:

Public wf As New WForm
Public ReadOnly TB() As Control = {wf.TextBox1, wf.TextBox2}

Then, in WForm.vb I have tried to refer to the textboxes via the array:

eg.

TB(0).Text = "Change text to this"

I know that the array is referring to the textboxes, because when I hover the cursor over the line 'TB(0).Text = "Change text to this" ' in debug mode, I get the following:

(0)|{Text = "Change text to this"}
(1)|{Text = ""}

but for some reason, the text in TextBox1 on the form isn't actually being changed!
(There is obviously no problem with change the textbox's text at this point in the code, because I've tried substituting the array reference 'TB(0)' with a direct reference to the textbox 'TextBox1', and the problem disappears.

View 5 Replies

Creating Multiples Of Controls?

Mar 26, 2010

I have a program that utilized a numericupdown control. When the numeric value = 1 then it displays 1 text box on button click When I add this code

[code]...

Trying to multiply the boxes it creates by 2, it doesn't work. How do I utilize multiplication to create multiples of my new textbox control? (the error I get, just in case it is needed is "Operator '*' is not defined for types 'System.windows.forms.textbox' and 'integer')

View 8 Replies

Access Controls After Creating Them At Runtime?

Jul 1, 2007

I am having some problems adding controls at runtime, or I guess I should say accessing the controls after adding them.The application starts off with a tab control named "tabIncidents" and one tab for an incident information. The user can click on a button to add a client. When the button is pressed a second tab is added to "tabIncidents" named "Clients." On the newly created "Clients" tab another tabcontrol is added named "tabClients" and we create a tab named "Client". Multiple "Client" tabs can be created on this tabcontrol. Each "Client" tab gets a usercontrol added named "clientInformation" which has name and address textboxes.

So basically it is ...

TabIncidents.tabFirstTab (already exists)
TabIncidents.Clients (new tab added at runtime if user clicks a button)
TabIncidents.Clients.tabClients (new tabcontrol on the new tab)

[code]....

View 17 Replies

C# - Silverlight Controls For Creating A Console?

Oct 24, 2009

I'm developing a Silverlight application where I want to simulate a console. There are a lot of ways to represent this - StackPannels, grid of TextBoxes, etc - and I was wondering what the bets fit would be?

Display an 80x20 grid that scales based on parent size Be able to update an individual cell's character Be able to set a cell's forground and background color

View 2 Replies

Creating Controls From Code In FOR NEXT Loop?

Nov 24, 2009

I'm creating 50 picbox in code. they are named Area1_1 to Area 1_50.

They all have different XY position and different size, setup in % of the form width.

Like this:

Code:
Dim Area1_1 As New PictureBox
' Dim 48 other box...
Dim Area1_50 As New PictureBox

[Code]....

But it don't work. Probably because the controls is not added to the form yet...

View 8 Replies

Creating Dynamic Button Controls?

Jan 9, 2009

I am writing an application that requires button controls to be created at run time because the amoutn of controls created depends on data retrieved from a database.

I believe I am creating the control properly but I am not capturing the click event.

Code example:

Dim myButton As Button
myButton = New Button
myButton.id = "id"

[Code]....

View 5 Replies

Creating Form Controls At Runtime?

Jan 5, 2011

I want to create a Panel dynamically on the form when a button is clicked. Also labels with given TEXT are also to be created when create label button is clicked. then we should be able to print the form contents as it appears but without any buttons. We should be able to resize the panel to adjust the page size.

View 1 Replies

Creating Multiple Controls At Runtime

Jan 21, 2012

I know how to create a control at runtime e.g.[code]Can anyone tell me how to create multiple instances using a for-next loop? e.g.[code]The part I can't work out is how to give each new button a new name... like button1, button2 etc

View 4 Replies

Creating Tooltip For Disabled Controls?

Nov 18, 2011

I am trying to get ToolTips for disabled controls (IE: checkbox) and I found the below code:

Imports System.ComponentModel
''' <summary>
''' Custom ToolTip Component that is based on a normal tooltip component but tracks tips

[code].....

View 20 Replies

Dynamicly Creating Controls At Runtime

Dec 23, 2009

[Code]...

I need the picture to have a tag value so i can use them later.

View 10 Replies

Get A Primer On Creating Custom Controls?

Dec 2, 2009

I am new to VB 2008 having spent most of my time in 2003. What is the recommendation for the best place to get a primer on creating custom controls in VB.NET. I prefer to use VB directly and not the WPF.

View 2 Replies

Stop Creating Controls If It Already Exists

Jun 24, 2012

I am Creating a sales voucher.i have 2 labels Namely lblHilight0 and lblCount0 and also 6 textbox namely txtNameOfItem0, txtActualQuantity0, txt BilledQuantity0, txtRate0, txtAmount0 and txtRemarks0..All these Controls are in a Panel named PanelItems..The AutoScroll Property of PanelItems is set to True..when any key is pressed in txtremarks0 the new objects are created as follows [code]when i scroll down and up and then if i press a key on txtremarks(i) then it leaves spaces..

View 10 Replies

VB 2010 Creating Controls - How To Put In Toolbox

Dec 5, 2011

I'm creating a control. But I don't understand how can I put it in my toolbox?

View 19 Replies

VS 2008 : Programmatically Creating Controls?

Sep 24, 2009

I have a panel that is a set size and has its Autoscroll property set to True.I am parsing text files and then adding them to the panel. I'm extracting specific lines and then adding them to labels and text boxes that are in the panel.When my app runs, it can parse anywhere from 0-10 files at a time.If there are no files to parse, I don't want any controls in the panel. I'll be creating the controls based on how many text files I have. For each text file, I'll have 3 controls.

I'll count the text files before I parse them, and insert the controls into the panel.The problem is that I don't know how to place the controls based on the location of the panel/form. I know the panel will always have a permanent spot, but I won't know if the location parameters of the panel have changed because I won't know how many controls there will be before the app parses the files.

However, I will know the size of the controls that I'm inserting.So, with all of that, is there a way to insert the controls inside of the panel, and then based on that information, insert the others?

View 12 Replies

VS 2008 Creating Controls With Code?

May 15, 2011

The editor basically uses a bunch of labels and pictureboxes (for now) and then an image is created from the panel which contains all of the controls.It sounds quite confusing, but basically i'm trying to create something like visual studio itself, which will allow "controls" to be added onto a panel, and then everything can be exported as an image when the user chooses to.I've worked out all the code to move controls and exporting the image, just having trouble trying to work out how to add an event for newly created controls as you can only handle a control, and not a variable.

View 3 Replies

VS 2010 Creating And Removing Controls?

Sep 2, 2010

I'm making quite the complex program, and while I try to figure out some more advanced methods that work better for what I'm trying to do, I'd like to learn how to do this (which is a bit of a roundabout method to what I've been trying). I'm wondering, how can I programatically create and remove objects? For example, I have webbrowser1. I want to remove it and create another webbrowser that I will also name webbrowser1. (therefore, the instance of the original must be removed)

View 5 Replies

VS 2010 Creating Custom Controls?

Aug 23, 2010

I got this whole thing pretty well down (it's actually quite easy), but I've seen custom controls created where you can click that little arrow on the top-right corner and add things or change things about it.

How exactly is this done? I'd Google it (which is why you don't see me post here too often) but I really don't know how to describe it.

View 1 Replies

Creating And Coding Of Events Of Dynamic Controls

Apr 5, 2009

I had been searching as to how I could create an array of controls dynamically, and after some searching found some helpful code as shown below [code]This way in the above code "structureComboBoxes" will have an array of comboBoxes (VB6.0 was way easy to get this crap done!! I guess its cleaner here)Now my next problem is How do i code for events of each of these combo boxes?

View 6 Replies

VS 2005 - Creating Array Of Custom Controls?

Nov 6, 2009

I am creating an array of customer controls by doing the following:
Dim CtlLosArray(150) As Control

Then I'm setting up the first control in the array like this:
CtlLosArray(1) = New ShieldLOSInfobox
CtlLosArray(1).Location = New Point(0, 0)
CtlLosArray(1).Visible = True
CtlLosArray(1).Show()
CtlLosArray(1).Name = "Label1"
Me.pnlLOS.Controls.Add(CtlLosArray(1))

Now on this custom control I have a panel and a few text boxes and as you can see I may be adding about 150 of these custom controls. What I am wanting to do is to be able to access that control then the item on that control based on the array. Something like the following:
CtlLosArray(1).Controls.Item(Panel1).backcolor = Color.Yellow
But the above does not work. How I can access a specific item on the customer control within the array?

View 2 Replies

VS 2008 - Creating Instances Of Controls On Form?

Sep 14, 2010

Is it possible to create instances of controls on a form ? Of course I mean visually , not just by code. After all, these languages define themselves as "Visual" so they should provide that possibility. It is important for the instances to be visible during design time because otherwise we could only guess where those controls might "land". Nevertheless , I have the feeling this is not possible in VB .NET but still I thought I should ask first ...

View 11 Replies

VS 2008 Creating Dynamic SerialPort Controls

May 31, 2009

I need to create some serial port controlls manually. My program reads through a config file, and it if comes across an entry called COMPORT then I need to create a contol to talk to this port. The entries in the ini file might be

COMPORT=COM1
COMPORT=COM3
COMPORT=COM7

So here is my problem! I'd like to create the variable control name with part of the com port number, so I can always refer back to it.
EG.

Dim strVar as sring = "COM1"
Dim CName+strVar As New System.IO.Ports.SerialPort

View 1 Replies

Controls Can't Appear At Run Time

Sep 4, 2009

I am using VB2008 express and I have created a form etc.

But any changes I make in the IDE dont appear in the run time. It seems to revert to another version at run time and I dont know how. I have tried adding new code, i tested this with a 'form load messagebox', but it does not appear. I also added a new button and resized the form but none of these changes are appearing, I really have no clue as to what is happening. I have turned of the veriosning in the project settings.

View 1 Replies

VS 2008 Good Tutorial For Creating Custom Controls

Jul 6, 2009

Can anyone point me to a good tutorial for creating custom controls. I want something that is actually understandable.I have gone through a few but nothing really any good at this point. I want to create my own contol that uses its own look and not just modifying a windows control.

View 2 Replies

C# - Adding Controls At Run-time

Jun 9, 2009

When adding controls to a form at runtime, you can do either of the following:

[Code]...

View 7 Replies

Controls On Panels Gen At Run Time?

Apr 14, 2011

I am adding controls to form at run time.I am doing the following with no problem:

[Code]...

View 12 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved