i'd like to customize the left side of the save file dialog boxes' folders. when you open the save file dialog, the folders located on the left. how do i change those since i've seen some programs open the save or open file dialog with their preset prefferences..so much work to do and so many choices to choose from...
View 9 RepliesI have an assignment due this week in which I have to make a app that has 5 buttons and a picture box. When each button is clicked it has to show the corresponding picture in the picture box, the fifth button closes the app.
I have the whole form set up the way it should be, but I have no idea how to write the code to make the buttons display the images and close the app.I have the images in a folder within the project folders.
I have yet to be able to find one, the one I found should how to do it using a file opener dialog and a folder browser dialog but that is not what I think my prof wants us to do, as that is more for a picture viewer app that lets the user choose the file of the image they want ot view.
All i want is for the buttons to be linked to specific photos that are part of the application itself and have them open.
I have a VB/C# .NET 2.0 project that, if possible, I would like to customize the OpenFileDialog box to select a directory rather than a file. The reason for this is because the FolderBrowserDialog is ugly and a pain for most of my users to navigate using.
I know how to filter extensions using OpenFileDialog, but is there a flag or variable I can set that will allow me to only show directories and select those directories that is built into .NET? And if not, what is a good third party dialog to use/where should I begin if I am to create my own?
I need a code for the open file dialog that if a file is not supported then a message box appears stating the error. This is my open file dialog code. [code] The message box pops up like it is suppose to, when you click ok the open file comes back up like it is suppose to. When you put in the correct file the message box comes back up again. Also the message pops up even if the correct file is put in the open file. but if you close the file dialog the image is where it is suppose to be.I believe the code for the public sub wrongfile is what is the problem. can some one look it over and let me know what changes are needed.
View 7 RepliesI'm using the FileSaveAs dialog control to allow the user to select a filename to save a file either as a doc file, an rtf file or a pdf file (that part was easy).However, after a bit of testing, it seems that the file extension doesn't automatically change when selecting the different file types.If the filename in the dialog is Foo.doc and I select FileType *.pdf and click "Save", my app still tries to save the file as a doc type.Virtually every other MS app automatically changes the extension to match a selected file type from the Office Suite to Paint. here's my code:
Dim dlg As New SaveFileDialog
dlg.InitialDirectory = m_sReportFolder
dlg.FileName = sProjectName & ".docx"[code]......
What i am trying to do is open a save file dialog and write to a .txt firl the contents of my listview. so far:
[Code]...
i have this, but i'm not to sure how to write to the .txt file i know i need to use a for each to loop the contents of the list view
I have a checked list box that is populated with the text from a text file. I started off with this code:
Dim FileToLoad As String
FileToLoad = TextBox3.Text
Dim fs As FileStream = New FileStream(FileToLoad, FileMode.Open)
[code].....
I am writing a Windows Form program to automatically download and store generated PDF reports from a web site using the WebBrowser Control. The web site uses Ajax to link an icon back to the source aspx file which then returns a PDF file.
The problem I have is that the WebBrowser control brings up the File Save As dialog box when the PDF file is returned and I can find no way of handling this to cature and save the returned file. I have found other examples of how to manage this using the Navagating event to validate the extension of the file that is being accessed (e.g. [URL] and, if not an HTM, file then use the HTTP Web control to directly download the file. Unfortunately this will not work as the call references a .aspx page.
code snippet that would allow a progress bar to track the input of a text file? Normally I would not bother with this, but the text files are > 10,000 lines long, which is noticable even on a fast machine. The number of lines is variable, so I would assume that one would not use a fixed value to calculate when the progress bar goes 100%.
View 4 RepliesI need to create a dotNet saveAs dialog, but I need to populate the file formats in the dialog. After the person have selected a file, it must connect that to a file format that I populate into the SaveAs command in the Excel Interop. After the Interop SaveAs command, I must check if the file have been saved correctly.
View 1 Replieshow do i return the file path to a variable when using open file dialog to browse and open a file?
View 14 Replieshow can i specify dynamically by using open file dialog box
View 1 RepliesFile I/O and Registry :: VB newb Open File Dialog
View 2 RepliesI'm currently working on a script that uses an open file dialog to select a file and then send it to another folder.The open file dialog works fine, and I can store the filename/location fine in a variable. What I want to know is how to copy a user-defined file to a set directory. All of the stuff I've found requires you to know what the filename of the thing you're moving is.
View 3 RepliesI am creating a text file using a save file dialog and copying the path to the text box which file is used to write from vb.net. when i try to write i get an error "The process cannot access the file '....fileName.txt' because it is being used by other program".
The code is below
Public Sub writeInTextFile()
Try
Dim oWrite As New StreamWriter(TxtOutputPath.Text)
[Code].....
im making a simple program that will copy a single file. im trying to get the name of the file that i selected in the open file dialog but i get the location and file name (C:Users****Documents est est.txt) im trying to just get (test.txt)
View 2 RepliesI'm making an alarm program, and I want the user to be able to choose their alarm sound. To do that, I want to use the openfiledialog box, but I don't know how to play it. Here's the code:
[Code]...
i want to make a file downloader from internet that will use save file dialog.... and i also wanna do it, so it knows the extension of downloading file(so it can vary every time)
[Code]...
I am using this, to read 1+ files from the openFileDialog, but I am having a problem getting just the file name, I can get the location "C:My Documentsfilename.jpg" but how do I get just the name "filename.jpg"?
I want to replace it with this line: can.Text = Regex.Replace(file, ".+\$", "")
vb.net
Private Sub OpenToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenToolStripMenuItem.Click
[Code]....
I have a simple desktop application that uses a .NET setup project (.msi file) to perform the installation. On the first installation, everything proceeds in a timely fashion with good feedback for the user.The problem occurs when the user is installing the latest version of the application over an old version on their machine.There is an unacceptably long delay of about 60 to 180 seconds from the time the installer's 'Welcome' dialog [It's not the Welcome dialog, I've removed that from the Start section of the setup project and replaced it with a CheckBox dialog to ask if the user wants a shortcut on the desktop] disappears until the 'Progress' dialog appears. The user sees minute(s) of blank screen and thinks the install has stopped or failed.
In the setup project properties, I've got the 'DetectNewerInstalledVersion' and 'RemovePreviousVersions' properties set to true. So, I believe that while nothing appears to be happening, the installer is actually removing the old version. The 'Progress' dialog does not appear until the new version begins installation.I've been trying to either:
a) Get the 'Progress' dialog to display immediately after the 'Install Icon' dialog disappears
b) Show another dialog while the Uninstall is running to let the user know that the setup is still running and everything is OK.
I have been unsuccessful with both methods. I'm using VS 2008 SP1?
Can I create new dialog results for my dialog forms? And then use them with Form.ShowDialog method?
View 13 RepliesIs there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
View 3 RepliesI often use the process of displaying a dialog from a form, with the dialog user input then used to update the main form without any problem. In a new scenerio I launch the main application screen, I then show a login dialog ontop of the main app screen and can launch another dialog from the login if a new user is required. The plan is to update the login dialog (updating a combobox to reflect the addition of a new user) from the new user dialog.
See code below :-
'Update login forms user list as new user added successfully
frmRoomBookingLogin.cboLogin.DataSource = Nothing
frmRoomBookingLogin.txtPassword.Text = "Updating password from dialog"
MessageBox.Show("The password text is " & frmRoomBookingLogin.txtPassword.Text)
[code]....
The messagebox implies the dialog has been updated yet the text does not change. Is it possible to update the dialog when using a setup such as Form -> dialog -> dialog? I'm intrigued as why the dialog does not reflect changes. I have never refreshed/repainted the dialog as never required to in my other examples when updating a form from a dialog and never encountered a problem when using a two tier form setup.
Is there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
View 12 RepliesWhats the code for the save dialog? I want to save a file of my program. So far, all i know is[code]...
View 3 RepliesI've added a needed feature to my program where the user will move their completed forms to the network drive. Currently the program finds all associated files in the source directory and then moves them, but I was wondering if there is a way to move only selected files or multiple files at a given time. Using VS 2010, I've looked at the open and save file dialog boxes, but open only lets me select one file at a time while the save dialog box does not let me move them. Just wondering of some ideas/suggestions for this.
View 1 RepliesHow do i make it that when i hit a button file dialog opens and i can select a text file from my computer
then output the text file into listbox1.text
So far I have this for my opening-
Dim alltext As String = "", lineoftext As String = ""
If OpenFileDialog1.FileName <> "" Then
End If
[Code]....
it doesn't work but isn't that where is should be? Also I get this error when it trys to load- QuoteA first chance exception of type 'System.IO.FileNotFoundException' occurred in Microsoft.VisualBasic.dll However the program does continue to load and the file I want to have it open is in the directory.
I am trying to pull up a save file dialog, see code below:-
Shared Sub SaveAs()
Dim StrPath As String = ""
Dim strFile As String = ""[code].....
What I need is the folder location path of where I am trying to save the file, which I was hoping to get from strPath. The name of the file (which I can get from strFile)I also need the file extension which I was hoping to get from strExt
What i mean here is how can i save usercontrols that have panels that contains labels using filesavedialogbox and get it back by openfiledialogbox? i want it to be save as AMS extension. i try the code below to open it, but it's because it doesn't load anything.[code]...
View 3 Replies