Datagridview - Formatting Don't Applies When User Manually Enter A Value
Nov 19, 2010
The situation: I have a datagridview with one column (col1). In the datagrid definition (design view), i have created this row, and set the formatting to C2 (or C0, or C - I tried them all). then, I load my datagrid view pro programmatically :
dbl_myValue as double
dbl_myValue = 6.99
datagridview1.item(0,0) =
dbl_myValue
The datagridView shows the data correctly : 6.99$. When I "spy" on the datagridview.item(0,0), the "Value" property is a Double.
the problem: It don't work if the user manually enter a value : click in the cell, enter a numeric value (let's say 100, without decimal to avoid complexity) and then LEAVE the cell (so no more in EDIT mode). The formating just don't applies. When I "spy" on the datagridview.item(0,0), the "value" property is a STRING. So I guess this is the problem, but how can i do?
View 1 Replies
ADVERTISEMENT
Jan 16, 2008
I have used My.Settings for quite some time now, in both VS2005 and now in 2008, but never noticed this behaviour yet... I must be forgetting something trivial? I create a StringCollection setting and manually enter some data (strings).I write some code to handle this, and I get it to work.
Then, I manually add some new strings (and edit the older ones) in the Settings page, save the project, and run my code again.For some reason, the last changes have not been saved... Whenever I look in the settings page, I see them there, but my code cannot recognize them..
[Code]...
View 12 Replies
Aug 29, 2010
how to enter a data that i enter in textbox to a datagridview... for example i enter in the textbox is round and when i click add it will go to database... im using ms access database
View 1 Replies
Jun 10, 2009
Historically I used Tek-Tips for stuff like this but I can no longer access my account there and they do not respond to form based mail. Maybe they got tired of the questions too :-)
I am not a student. I manage a 'large' network. Every now and then I need to roll up something for a specific task. Most of the stuff I write only sees my desktop so neatness and originality are not an issue.My current 'project' is throttling back a few of my users disk storage. I am not allowed to implement Quota's (Server 2003 infrastructure) so I thought the next best thing would be a duplicate file report. I purchased Folder Sized 4 which is a beautiful product (I have used it since it's humble beginnings as Bullet Proof Folders). The end users claim that the filename and date checks are not enough to prove a duplicate. Enter my idea.
I have cobbled together a MD5 hash generator from a function found out on the web. Now I want to send the results to a datagridview instead of my current disk files.I has thought that I could access the rows & columns like dgv.row(x).column(x) = "strFile", dgv.row(x).column(y) = "strMD5"Nope, hunting through the available properties did not point me to any likely candidates.
Again, if this is not the place for questions of this nature please let me know. I am not a programmer, nor am I in training to be one. I just toss little things like this together when needed. Importing a CSV file into Excell is working, but it seems rather lame to be taking so many steps.
View 1 Replies
Jun 4, 2012
I'm currently having an issue with VB.Net and Adobe Acrobat. The issue comes from exiting Acrobat but the Windows Taskbar still states that there is an Acrobat.exe process open. I have tried using Marshal.ReleaseComObject(), but it still hangs there. I do not want to have to rely on the "End Process" option on the Task bar in order to remove it.
Below is a snippet of the code that I am try to using:
Try
'Tries To Close Acrobat Application
acrobatApp.Exit()
System.Runtime.InteropServices.Marshal.ReleaseComObject(javaScriptObj)
[Code] .....
Although I am not sure if this could be a problem - I run a javascript saveAs script on the Acrobat side in order to make a copy of the file. This also could be a reason why it is hanging, but I ruled it out based on basic knowledge of saving files and exiting from other Acrobat/Microsoft Programs. Acrobat only closes when my application ends. (Currently) I am trying to make it consider the case if a user manually closes the Acrobat application.
View 1 Replies
Sep 17, 2007
I'm adding rows to a DataGridView via the following function, passing in one or more DataTables.The DataGrid is not aware what column(s) are coming back, but appears to build the column names okay.It's when it adds the individual cells (highlighted) that I get the following message:
ArgumentOutOfRangeException was unhandledSpecified argument was out of the range of valid values.Parameter name: rowIndex
View 7 Replies
Sep 11, 2011
I'm adding rows to a DataGridView via the following function, passing in one or more DataTables.The DataGrid is not aware what column(s) are coming back, but appears to build the column names okay.
View 2 Replies
Jan 14, 2011
i am using a Datagridview on my form. It get's it's datasource from a dataset: grd.datasource=set_temp After that I add ComboboxColumns manually. At the end I loop columns and set values into that cells from the comboboxcolumns. Works perfect so far. Now I click on a header and the sorting is changed, and then the cells from the comboboxcolumns all lose their values, they are all empty.
Why and what do I do to avoid that? Or must i refill those manual Values after sorting?
View 1 Replies
Apr 23, 2010
I would like to update data from my datagridview to ma database manually.
How should I determine which rows were edited?
View 5 Replies
Oct 1, 2011
I have a datagridview on my desktop application, what I need is to show in a a textbox the sum of collums values, of rows selected manually. Is this possible?
View 4 Replies
Sep 23, 2009
I've been playing with a DGV. Let's say for my question here, I want a grid that is 10x10. I would like the font in each cell to be Arial 10 regular. Only one character will be in each cell (I'll use "M"). I would LIKE the cells to be 17 pixels by 17 pixels. But, if I manually force the column width to be 17, I get about half of my M and three dots "M...". I'm thinking this is a padding thing but as far as I can tell, everything is set to 0. See code and then more comments below:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
With DataGridView1
[Code]....
Question 1: How can I reclaim some of what seems to be lost space around the cell contents so I don't have to make them bigger than they need to be? I'd like them to be 17x17 with the single character centered within.
Question 2: Do I have to manually set the height and width of each row and column? I'm thinking the RowTemplate setting but can't seem to get it to work.
FYI: This is a new project with a DGV dragged onto the form. All changes have been made programatically.
View 8 Replies
Sep 13, 2009
Is it possible to manually save data from my dataGridView to my SQL server database table?
if it is possible can some please tell me how to do it because i don't like using the data sets and reader VB has because it doesn't give me full control over the procedure.
please see the code below it all works fine its just the last two line im struggling with, which is where i am trying to save the data from the two columns in my DataGridView [code]...
View 15 Replies
Sep 19, 2009
Which syntax is to be used in order to retrieve that IconCriteria(2) applies to cell C5.[code..]
View 2 Replies
Feb 2, 2012
I just joined because I'm a newb/student in VB. Currently taking a VB course but just don't understand why this is giving me a problem. If anyone can explain/help it would be great. The problem lies with the "red" 1 that is highlighted. I don't understand what is wrong with it. PS: this is statement applies to the LUHN method for credit card verification.
[Code]...
View 5 Replies
Dec 6, 2010
I have a datagridview which is bound to a table in a database. In said table, I have a field called Date and a field called Time, among other various fields. By default, I see that VB.NET attempts to help me by formatting the Date and Time columns for me, however I would like to do it my own way. I checked the columns' DefaultCellStyle fields and found them blank. Apparently, its current behavior is defined elsewhere. How would I go about removing the default formatting that VB.NET put in place to make room for my own?
View 2 Replies
Feb 11, 2012
In my form load event I am setting the defaultcellstyle formats. They are not taking hold anyone know why? None of the formatting that is expected in the code after I bind the datatable to the grid is getting done even though the code steps through it
Private Sub frmADRORD_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'wire the delegate function for incoming updates
AddHandler m_helper.DataUpdate, AddressOf UpdateGridInvoker
'bind the visual grid with the binding source
[code]....
View 1 Replies
Jan 8, 2010
I have formated a column : "N2" but when it is : 1,2 or 1,3 or 2,3 .... then it OK BUT IF IT IS 0,1 OR 0,2 OR 0,.... THEN MY PROGRAM DETERMINE IT IS LETTER BEHIND ZERO , NAMELY THEY ARE 1 OR 2 OR 3.... I want it should be exactly 0,1 or 0,2...
View 1 Replies
May 18, 2010
I am fixing up a visual basic program using visual studio 2005, specifically in visual basic. I am currently attempting to format the datagridview used to display data from a database. The values from the database being displayed are a mix of integers (used for displaying information such as number of units sold) and floating point values (used to display revenue, etc). I need to format all the values to display as integers (by simply truncating the decimal places, not rounding) as all (including the values that should already be integers which are appearing with two 0s following the decimal place). I have used the round function as follows round(value, 0, 1) which as I understand should get rid of all decimal places by simply truncating them, however I am still left with two 0s after the decimal place. Next, I went to the designer view and edited the columns property of the datagridview so that they are all set to be numeric with zero decimal places, yet the decimal still remains. I followed that by going back into the code and change any CType() that were decimal to Integer and still no change.
View 5 Replies
Feb 12, 2010
Eg. ""vb.net" timer event trigger on purpose". This application is meant to run at all times to download a web page every minute. To avoid freezing the UI, I read that the best solution is to move the code from a While/Sleep loop to a Timer that will be triggered every minute. The problem I have, is that the user must wait for a minute before the event is triggered:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Timer1.Interval = 60000
Timer1.Enabled = True
[CODE]...
Is it possible to force this event to occur instead of waiting for it?
View 1 Replies
Oct 18, 2010
I have a RichTextBox with an OnChanged event. The OnChanged event should look at each line in the RichTextBox and if the line is of prime length colour it red, otherwise colour it black. How do I do this? I think it is possible to select from index a to index b and set selection colour, but I think this will lose my cursor position.
View 2 Replies
Aug 30, 2011
I have a question in relation to formatting text fro 24-hour time.
The format I require is always as follows 00:00
How can I make the ":" appear as soon as the second digit is entered as this is required to separate hours from minutes and also how can I force a 0 to appear for any numbers up to and including 9?
Examples being: 00, 01, 02, 03, 04, 05, 06, 07, 08, 09.
These zeros are required but may be forgotten by the user entering them into the textbox?
View 2 Replies
Jul 28, 2011
I have set a column (which is a phone number) in the designer with the following: DataGridViewCellStyle { Format="(###)###-####" }
This seems to have no affect upon the results when it is displayed. It simply displays ########## every time. Where should I set the formatting?
View 1 Replies
May 23, 2012
I am working on a vb6 to vb.net migration project using vs 3.5. I have a datagridview.in a particular cell of this grid, user has to enter only numeric data. but after user enter data, itshould become concainated with a $ symbol (eg: if user enter 34, the cell value should become $34). And if he/she presses the hyphen ("-") in the key board, the data (ie. $34) should become -$34 and if again presses the hyphen button in key board, the data should become $34.
View 3 Replies
Aug 12, 2011
I loading data into datagridview from xml file. And I have a one problem: date formatting.
Datagridview shows a date like this: 2011-01-01T00:00:00+02:00
How to force him to show the date in short date format (only 01.01.2011) without a time
I've tried this code:
ds = New DataSet
ds.ReadXml("filename.xml")
Dim dv As DataView = New DataView(ds.Tables(0))
[Code]......
View 4 Replies
Feb 28, 2012
I have a DataGridView that is showing some weird numerical data. For example, my under lying datatable of the datagridview has 4.69, but the datagridview shows 4.6899999999999999995. What is weird is it doesn't do it for every cell in the column. For example, my underlying datatable has 2.66 and the datagridview cell shows 2.66, which is correct. I should note that the underlying datatable column that contains the numbers is of floating point data type which comes from the database column and the datagridview column is TextBox. Here is what the values look like in the database, underlying datatable and datagridview.
View 5 Replies
Jul 7, 2009
Im trying to format datagridview column to a checkbox as its column is assigned to msaccess YES/NO data type.[code]
View 7 Replies
Jan 21, 2012
When a certain form (containing a datagridview (dgv)) is first loaded, the dgv cell formatting event is triggered by the line
dgv_WorkHistory.DataSource = ds_WorkHistory.Tables(0).DefaultView This successfully adds some background colour to a few cells in the displayed table. After this the next line of code is executed. The problem is that if I then try to load a different table (by choosing one from a listbox), the new table displays OK but without the desired formatting. Why?
Stepping through the code I find first of all that when I click on the listbox the dgv cell formatting event is instantly raised (immediately, even before any code in the listbox click event is executed). Why does clicking on the listbox trigger the cell formatting event?
Then, when execution reaches the line quoted above for the second time (remember it triggered cell formatting the first time round) it doesn't this time trigger it. The next line of code is executed instead. Why has the behaviour changed?
View 1 Replies
Nov 15, 2011
if its possible to have a msgbox cleared without having the user do it manually? what would be my best option here?
View 8 Replies
Dec 16, 2009
I have a text box labled QTY, which feeds the QTY column on a datatable. the table then is ran through a function that takes the data and converts it to a string which my production machine can read. My problem is this, and its probably really simple (these problems usually are) how to i force the user to use a specific type of input on the txtbox so they would have to put the QTY in the format of 01 02 03 etc etc, i have it set to default to 00 but i want to force the user to haver to input 2 chars.
View 5 Replies
Feb 25, 2011
I have a datagridview I am displaying on a form and would like to format one of the columns differently then the available formats. I have a column that is a decimal(18,2) (in the table) named "MyDecimalField". In asp.net I could do this, in the "template field" of a datagrid.
math.round(MyDecimalField / 60 , 2)
In VB.net forms I cant figure out how to do that. Basically I need to divide the cell by 60 and round that to 2 decimal places.
IE
the Cell contains this: 1283.93
I want the user to see this: 21.40
1283.93 / 60 = 21.3988333 then round it to 21.40
View 1 Replies
