I am using vb.net. I have following weird problems:If I comment DGVCusClient.Rows.Add(), the cell in ("column1",0) does not display data. But in debug, I can see that the first cell has data assigned.If I do not comment DGVCusClient.Rows.Add(), the cell in ("column1",0) displays its data correctly. However, it adds the row on the top for the first time. Except for the first row, it adds rows to the bottom as usual.
Dim i As Integer = DGVCusClient.CurrentRow.Index
If Not ContainRecord(tempCusid, tempCltid) Then
Dim i As Integer = DGVCusClient.CurrentRow.Index
DGVCusClient.Item("Column1", i).Value = "a"
I want to display image next to the text in each row in a datagridview. I have searched the net in the past 1 hour, but no big success. I know, that I must override the cellpaint event, but how?
does somebody know the user will be able to press enter within a datagridview cell without moving to the next cell. Also i want that the carriage return symbol, i mean a symbol that represents the new line , to be displayed.
My program parses chat room text. In the room there are smileys that get displayed. What I'm trying to do is parse out the image URL, download the image and put the smiley in the correct spot between the text of the message.I can do the parsing and downloading of the image into the datagridview but this only works of the column is set as an image column. Obviously due to the nature of the program I need to be able to put both text and images into the same cell. How can I do this?
I have a datagridview that is scrollable due to number of columns necessary.When I edit a cell, I display a multi-column listview that shows the item that will fill the cell in the first column and some form of description or other information in the second and sometimes third column (this should answer why I didn't use a combobox in the column in the first place).When I display the listview, when I scroll the datagridview, the listview stays put (as is the obvious). Is there a method to anchor, for want of whatever the proper term is, the listview object to the datagridview cell associated with it so when I scroll, the listview also moves? Or do you have to do calculations and adjust the positioning and repaint the object?
I was thinking to add another column named "Symbol" and based on the "Status" column to format the cells of the "Symbol" column to display an image.
I edited the DGV, and add a new image column.
I created a directory in my solution called "references" where I put all the .bmp files
I don't know how to do this. My first thought was to put an expression in the DataTable Properties, but I didn't manage to make that work. Another way is to format the cells in the "Symbol" column, and again I don't know how to do that. I tried with "Select Case ... Case ... End Select" with no success.
LE: Should I Insert the .bmp files into SQL database (varbinary(MAX)) If yes, how?
I am using a list<of T> as a data source for a datagridview and would like to handle the draw event of the datagridview to evaluate the string length of the column cell. If larger than a particular number then I would just do something like
cell.value = string.substring(0,(whatever number I need it to be)).
I need to display the column header and cell value of the clicked cell in the data grid. For example if I click Argentina from the country column, the text box will display country = Argentina.So far the code I have is, please help me figure out the code for displaying the information in the text box
Private Sub DataGridView1_CellClick(ByVal sender As
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I have converted the fare field in gridview1 to display fare | seats in same cell as displayed below...
i want when user select/ click on Book button row then the fare amount will be diplayed in textbox1 and seats will displayed in Textbox2
Protected Sub GridView1_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles GridView1.SelectedIndexChanged Textbox1.text=GridView1.SelectedRow.Cells(6).TextToString End Sub
I need some help displaying the contents of a cell in excel into a combo box. I've been able to display if the contents of excel are numbers but can't seem to figure out how to display text.
I have the code below where I want to be able to click a row/cell in a datagrid and be able to display the related data from the database table in the second datagrid. strSQL = "SELECT Number,Description FROM Legislation " Dim cmd As New OleDbCommand(strSQL, oledbcon) Dim tRow As DataRow da = New OleDbDataAdapter(cmd) ds = New DataSet da.Fill(ds, "Legislation") Dim i, j As Integer If DataGrid1.Item(0, i).Value() Then DataGrid2.DataSource = ds.Tables(0) End If
I have a datagridview and in the _CellValidating event I am checking a cell to make sure it is filled in. If it is not, I want to stop editing, display a msgbox, and highlight the particular cell. Here is my code :
If e.ColumnIndex = 2 Then If e.FormattedValue = "" Then If Me.dgvFish.IsCurrentCellDirty Then MsgBox("Sample Number is a required field.")
[code]....
For some reason, I can't get the cell's backcolor to be filled in.
i'm using this code to display datagrid cell value in rich text box
Code
Dim rowtoselect = DataGridView1.CurrentRow rowtoselect.Selected = True rowtoselect.Cells(1).Selected = True
[Code].....
but i want to the richtexbox to display the cells 0 , 1 not only cell 1 i want the rich text box to display the whole cells of the row not just one cell of it
I wish to have a list selection inside a cell of it. like when the cursor is placed in a particular cell and the user hits 'Tab' button in keyboard a list of names & no should be listed and they have to select a particular name, click a particular row in the list form, which in turn needs to fill the cell with the name value.m
There are 3 columns(Count,Item,Price) in datagridview which is bound to a datasource. The count is 1 by default and it should increment by 1 when i click on a button,so the count would be 2 if i click button again
i have a datagridview which i populate of a dB. i have 3 columns on the dgv Account ID, Account Type and Notes. i created an add record button, that enables the user to add records. Account ID is a numerator in the dB, and i would like to automatically add 1 to the numerator. however i can't get the value of the last cell in the last row. for now i am using
Dim RowCount As Integer = Me.grdAccountTypes.RowCount - 1 Dim AccountID As Integer = grdAccountTypes.Item(0, RowCount).Value MessageBox.Show(AccountID)
how to do when i click the cell datagridview1 in the same time will display datagridview2 in the label5.text (in the same row)my code doesn't work.
Private Sub DataGridView1_CellClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView1.CellClick Try Dim k As Integer
How to do that no one cell is selected in DataGridView at first moment? (There are some controls in my form before the DataGridView and I don't want that any element of DataGridView is selected when the form is loaded).
I have a datagridview which have a ComboBoxCell, ComboBox is bound to data,, I want to use it as Traditional ComboBox,, I mean I want to display its Item (from display members) on the base of its value.
For example: When I do this Datagridview1.CurrentRow.Cells(4).value = 4 'Cell 4 is the DatagridviewComboBoxCell
It gives me the error that "DatagridviewComboBoxCell.value is not valid",
But I want that this combobox should Select And Display the item which value is 4.
I'm using VB.Net.'m using DataGridView with ColumnType = DataGridViewTextBoxColumn.
I have 3 columns. Column1, Column2, Column3. for example:
Column1 Column2 Column3 1 AA AAA 2 BB EDIT 3 CC CCC
If column3's value = "EDIT", then I need to edit only that cell. Here for example: i need to make the Column3's second cell to be readonly=false.So i cannot make any changes to (1, AA, AAA), (3, CC, CCC) and (2, BB). Need to make changes only EDIT cell.I tried this code. CountR is the row in which EDIT values is there.
