Datetime Picker Bound To Datatable Format
Apr 7, 2010[Code]...
what sould i fill in the part after ---addressof--- i dont now what to fill after
ADVERTISEMENT
Custom Format Of Datetime Picker?
Dec 1, 2011i need to format my datetime picker with this format 2:34 AM/PM can anyone help me how to do.. i tried to find it in the properties yet wasn't there..or is this possible to maskedtext box? i tried it again.. with this format 00:00 AM/PM but i don't like the result because it allows me to input 99:99 AM/PM..
View 2 RepliesUser Input Of Time In Format Hh /mm / Possible With Datetime Picker?
Oct 13, 2009I would like to capture a start and end time in format hh:mm.Instantly I thought a datetimepicker would be the most suitable component (see code below)[code]Now I'm unable to find a datetimepicker solution to allow settings of intervals like in the numericupdown control and unable to even set a mindate/maxdate in time format. Does anyone have a solution for these requests? I then thought about using a numericupdown control to capture hh:mm time but I could not find a way of doing this in ONE control rather than two whichwould involve code to ensure only valid hours/min values could be selected i.e. 0 - 23 and 00-59 and other date to string conversion/validation.For such a commonly recorded element I'm surprised to find little in the way of solutions other than third party controls.Does anyone have ideas for a way forward for a control to capture time as hh:mm with interval controls for hours and minutes?
View 4 RepliesUse Of DateTime Picker
Aug 28, 2009I am working on Search of records from Database between range of two dates. I implemented it with two textboxes for StartDate and EndDate and it is working fine.Now i want to attach Calender to the textboxes so that user may not have to type the dates instead user may just select the Startdate and Enddate from two Calenders.I tried with adding two DateTimePicker and used following code:[code]I have two queries:
1) DateTimePicker desplays date and time in the Textbox, I want that only Date is displayed in the Textbox.
2) How i can attach DateTimePicker directly to Texbox so that on runtime when i select a date from DateTimePicker it should immediately display in Textbox.
Datetime Picker Value Incorrect?
Mar 10, 2011i am having a problem with my date format. i want the format to be MM/DD/YYYY for example 02/28/2011 . i have put custom format in my event. but when i change my setting in regional settings it changes the format
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Myconnection As OleDbConnection
[Code]......
Get Only Date From DateTime Picker
Sep 22, 2010How can i get only date from date and time picker.
View 2 RepliesUsing DateTime Picker Object?
Jul 22, 2009I have a datetimepicker object and a label. Now i want when i choose a date from datetimepicker the label.text to be the next month of the chosen date. I wrote the following code, but it doesn`t work. What is the problem with it?
Private Sub DateTimePicker42_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DateTimePicker42.ValueChanged
Dim dateincome As Date
[Code].....
Data Extraction Using Datetime Picker
May 7, 2010i'm using two datetimepickers(from date and to date ) to extract records between these two dates.[code]
View 2 RepliesDateTime Picker Calendar Rollup?
Oct 5, 2011I have a datetimepicker on my form. When I click the down arrow, it goes down correctly. When I select a date, it stays down. In order for it to roll up, I have to change my focus to a different area.Is there anyway to make it rollup when a day is clicked? It feels awkward the way it is now.
View 5 RepliesDatetime Picker Doesn't Change
Jun 5, 2009Why this line doesn't change the value of my datetimepicker using me.gatepassbindingsource.addnew():
Me.GatepassDataSet.gpheader.gpdateColumn.DefaultValue = Now()
Implementing BindingNavigatorAddNewItem executes above line correctly. I don't want this because the bindingnavigator items are active. Coding me.gatepassbindingsource.addnew(), I can make my bindingnavigator items inactive/disabled while adding record.
DateTime Picker, Get Current Value In Formatted Way
Apr 24, 2010I have a Datetime Picker on a form.
When I use dtArrival.value for instance, it gives me the date in the format "24/04/2010 10:54 PM"
Is there a way that I can grab the value in the format "YY/MM/DD" e.g the value would return "10/04/24"?
Also whats the easiest way to calculate the number of days between two datetime pickers on the same form? I've tried to do it and it's just a mess.
Create A Datetime Picker Within A Datagrid View?
Mar 15, 2012i've come across many methods online to create a datetime picker within a datagrid view, but i haven't got a proper solution. i have a DGV which takes in truck no and date of arrival. i want the second column to appear as a datetime picker so the users can be restricted from entering anything else.
View 2 RepliesHow To Ignore Sunday And Saturdays On A DateTime Picker
Sep 30, 2009I need to count the sick leaves in a month, for that i have to ignor Sat-sun on a datetime picker. how to i set the DateTime picker to ignor Sat and Sun? Assume there are two date time pickers dt1 and dt2 thus there difference will return teh number of days without counting sat-sun.
View 3 RepliesIDE :: How To Make ComboBox And DateTime Picker Read Only
Jan 18, 2011I have a combo box and a datetime picker on a form that I do not want a user to be able to type in or select. I need both controls to look as if they are enabled with the default backcolor and black font color. How can I do this?
View 4 RepliesInserting A Value From DateTime Picker Causing Errors
Feb 27, 2012In a Windows Form on Visual Basic, I have a DateTime Picker for a user to select a time and date from.I'm inserting this value via a parameterized query into an Access Database. However, as I'm running the form, I keep getting the error Data type mismatch in criteria expression.If I remove the parameter from the Insert command, the field enters fine. But when I put it back in, it doesn't work.[code]
View 2 RepliesDisplay Null Values In A Datetime Picker Control?
May 23, 2011I would like to be able to display null values in a datetime picker control. I am using one datetime picker control for both datadisplay and data entry. when I load the data from the database and if there is no date then the datetime picker control must be blank.
View 3 RepliesVS 2008 Datetime Picker And Combo Box Return Null
Jul 14, 2009I have a datetimepicker and combobox on my form. If a user does not change the date on dtpicker or does not change text on combo box, these controls return null value, and the save operation fails. The controls are bound to data in a database.
View 1 RepliesDatagridview Bound To A Datatable Setting Its Datasource Property To The Datatable
May 20, 2011I have a datagridview bound to a datatable setting its datasource property to the datatable. I would like to have a child form that contains a list of columns associated with the datatable that contains a checkbox that will allow the user to hide and show the columns ( I do not know the best control to use here) (I assume this is the easy part as All i need to do is loop through each of the datatable's columns to get the column name)
now I would like save these visible columns on some event like form_closing so that the next time the user opens the form up it will remember the settings
Filter DataGridView Results From ComboBox And DateTime Picker Values
May 28, 2010I'm trying to create a Windows form application which uses a few data grid views to pull data back from a SQL Server database. I've managed to get the data back okay from the tables but what I want to do is filter that data dynamically based on values input by the user from a combo box and a date time picker. Each of the data grids display production data for a machine but the combo box and date time picker will allow the data to be filtered by shift and date respectively - how to I pass the values of these to the SQL query returning the data?
View 4 RepliesRad DateTime Picker Error - Selecting Date In Feburary Always Reset To March
Oct 30, 2009In Rad Datetime picker,when selecting any date in February always set it to date in March.
View 2 RepliesDate Time Picker Format
Oct 1, 2010When I use a DateTimePicker my months come in Danish (my System is Dansih)
But I have one Customer there want the Months in english ?
Format Of Date Time Picker?
May 9, 2012dtpPurDate.CustomFormat = "dd-MM-yyyy"
dtpPurDate.Text = DT.Rows(i)("PurDate")
In Access, PurDate is 1/1/1900 but in date time picker it's shown as 01-01-2000. At this time, short date format of system regional setting is like
If it's d/M/yyyy, it's shown as 01-01-1900.
How should I set the date time picker whatever regional setting is?
Custom Format Of Date Time Picker?
Apr 1, 2009I want to show just HH:MM AA, so I set that as the custom format. However, it still displays as HH:MM:SS AA. Is there a way to remove the seconds?
View 11 RepliesVS 2008 Date Time Picker Format?
Aug 5, 2011I am using VB 2008 and have a datetime picker. I am trying to use this value in an INSERT command to load in to a table but I just can't get it to work. I have changed the date format of the datetimepicker to dd/mm/yyyy . when i m trying to insert it in sql server, type conversion error arises...
View 2 RepliesDateTimePicker Bound To Nullable DateTime Field But No Null?
Apr 7, 2010I have a date time picker bould to a Nullable Datetime field in a sql server datatable. The ShowCheckBox option is set to true. If the user unchecks the checkbox on the datetimepicker I would like to the field to be set back to null in the DataTable. The default behaveour does not seem to do this and there is no specific event for the uncheck.
Private Sub dtpCertDate_ValueChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles dtpCertDate.ValueChanged
If dtpCertDate.Focused Then
[code].....
Bound Datatable To Values Of A Datetimepicker?
Mar 4, 2010this is my datatable i want each value of a datetimepicker to view the data
dim booking_table as new datatable
booking_table.Columns.Add(
"Time", GetType(String))
[Code]....
Can't Add Item To Listbox Bound To Datatable
Feb 24, 2009I have a listbox bound to a datatable, and controls that are bound to the same datable. As you navigate through the listbox, the controls correctly reflect the selected item, and changes to the controls update the dataset OK as well.Now I'm trying to add a "New" capability to the form. So on the click for "New", I deselect the currently selected item and clear the controls[cod]e...
View 1 RepliesUpdate DataGridView Bound To DataTable?
Mar 21, 2012I have a DataGridView bound to a DataTable. Although all rows are displayed in the grid, the table represented by the Grid's DataSource does not get updated after changing values in one or more DataGridView columns. Both grid and table contain a Primary Key. What am I missing here? Do I need to do something in the RowValidated event?
dgvCriticalContacts.AutoGenerateColumns = False
Dim ccRs As DataTable = Common.OpenRecordset("SELECT * FROM PhoneList")
dgvCriticalContacts.DataSource = ccRs
VS 2008 Datagrid Bound To Datatable?
May 30, 2009I have a check box column in a datagrid which is bound to a dataTable.My problem is if I check/uncheck some checkbox items in one row and then move to another row, the checkboxes that I checked/uncheck are reset back to their original state. Is there a way to maintain the edited checkbox state of items between rows?
View 1 RepliesFormat Data In A Bound DataGridView?
Feb 9, 2012I have a dgvAssetsSummary which holds data queried from the database, it hold's the AssetType column and Total column, it's grouped by AssetType, giving a summary of all the totals and what assettype they belong to.I'd like the Total column to be formatted so that there are no decimals and with commas, at present each total has four decimal places and no commas, this needs to be able to be read easily by clients. I've tried using the following code to format the column after I query the database, but to no avail.
dgvAssetsSummary.Columns("Total").DefaultCellStyle.Format = "#,#"
how to do this, I've had a bit of a look around but I can't find much. I'm currently looking at a couple of pages from the msdn library about it.