User Input Of Time In Format Hh /mm / Possible With Datetime Picker?
Oct 13, 2009
I would like to capture a start and end time in format hh:mm.Instantly I thought a datetimepicker would be the most suitable component (see code below)[code]Now I'm unable to find a datetimepicker solution to allow settings of intervals like in the numericupdown control and unable to even set a mindate/maxdate in time format. Does anyone have a solution for these requests? I then thought about using a numericupdown control to capture hh:mm time but I could not find a way of doing this in ONE control rather than two whichwould involve code to ensure only valid hours/min values could be selected i.e. 0 - 23 and 00-59 and other date to string conversion/validation.For such a commonly recorded element I'm surprised to find little in the way of solutions other than third party controls.Does anyone have ideas for a way forward for a control to capture time as hh:mm with interval controls for hours and minutes?
View 4 Replies
ADVERTISEMENT
Dec 1, 2011
i need to format my datetime picker with this format 2:34 AM/PM can anyone help me how to do.. i tried to find it in the properties yet wasn't there..or is this possible to maskedtext box? i tried it again.. with this format 00:00 AM/PM but i don't like the result because it allows me to input 99:99 AM/PM..
View 2 Replies
Feb 16, 2012
I'm trying to make a program that takes user input and sets it to a time value.[code]..
I'm getting an invalid cast error. Does anyone have any hints on how to format the user input as a time value?
View 3 Replies
Apr 7, 2010
[Code]...
what sould i fill in the part after ---addressof--- i dont now what to fill after
View 2 Replies
Oct 1, 2010
When I use a DateTimePicker my months come in Danish (my System is Dansih)
But I have one Customer there want the Months in english ?
View 2 Replies
May 9, 2012
dtpPurDate.CustomFormat = "dd-MM-yyyy"
dtpPurDate.Text = DT.Rows(i)("PurDate")
In Access, PurDate is 1/1/1900 but in date time picker it's shown as 01-01-2000. At this time, short date format of system regional setting is like
If it's d/M/yyyy, it's shown as 01-01-1900.
How should I set the date time picker whatever regional setting is?
View 1 Replies
Apr 1, 2009
I want to show just HH:MM AA, so I set that as the custom format. However, it still displays as HH:MM:SS AA. Is there a way to remove the seconds?
View 11 Replies
Aug 5, 2011
I am using VB 2008 and have a datetime picker. I am trying to use this value in an INSERT command to load in to a table but I just can't get it to work. I have changed the date format of the datetimepicker to dd/mm/yyyy . when i m trying to insert it in sql server, type conversion error arises...
View 2 Replies
Apr 26, 2009
With my datagridview I have column for datetime. I used the following for format.
Mydatagrid1.Columns(3).DefaultCellStyle.Format = "dd/MM/yyyy"
But the problem is it's getting input like MM/dd/yyyy and after pressing enter it's changing to dd/mm/yyyy style. So is it possible to read input like "dd/MM/yyyy".
View 4 Replies
Jun 21, 2010
An issue.For my date time picker control I want the day as 1st on any value selected by the user.(day of date part should be 1 for any date).
View 1 Replies
Jul 30, 2011
I'm getting date-time from a source as 20110731183330. I want to convert it to '7/31/2011 06:33:30 PM'. Is there a one line code for the same in vb.net?
View 3 Replies
Jan 25, 2012
I am using a vb windows application I need to allow a user to enter their ID num in a text box and it need to automatically populate their date of birth
View 6 Replies
Dec 22, 2011
I have a date entered in from at DateTimePicker (dtDate.Value) and am writing it to an access database. This insert code works without the date, but not with it.
"INSERT INTO Deads (Location, LotNo, Date, Head, Cause, BookCost, JournalEntry, Pasture) "
InsertRow(StrComp, InsertSQL)
[code].....
View 6 Replies
Mar 8, 2009
I have been trying to check if a user has input a specific time format into a textbox.For example
1- User enters time in hhmm format
2- Checks the input
3- If wrong, MessageBox.Show("Need hh:mm time format")
I have only used IF statement with IsNumeric to check for number input but was unsuccessful with various attempts I can think of for checking a time format as I need Option Strict On and have the following error: Option Strict On disallows implicit conversions from 'String' to 'Date'.Is there a way to like check if the hh:mm has the ":" separator too?
View 5 Replies
Aug 28, 2009
I am working on Search of records from Database between range of two dates. I implemented it with two textboxes for StartDate and EndDate and it is working fine.Now i want to attach Calender to the textboxes so that user may not have to type the dates instead user may just select the Startdate and Enddate from two Calenders.I tried with adding two DateTimePicker and used following code:[code]I have two queries:
1) DateTimePicker desplays date and time in the Textbox, I want that only Date is displayed in the Textbox.
2) How i can attach DateTimePicker directly to Texbox so that on runtime when i select a date from DateTimePicker it should immediately display in Textbox.
View 10 Replies
Mar 10, 2011
i am having a problem with my date format. i want the format to be MM/DD/YYYY for example 02/28/2011 . i have put custom format in my event. but when i change my setting in regional settings it changes the format
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Myconnection As OleDbConnection
[Code]......
View 9 Replies
Sep 22, 2010
How can i get only date from date and time picker.
View 2 Replies
Jul 22, 2009
I have a datetimepicker object and a label. Now i want when i choose a date from datetimepicker the label.text to be the next month of the chosen date. I wrote the following code, but it doesn`t work. What is the problem with it?
Private Sub DateTimePicker42_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles DateTimePicker42.ValueChanged
Dim dateincome As Date
[Code].....
View 4 Replies
May 7, 2010
i'm using two datetimepickers(from date and to date ) to extract records between these two dates.[code]
View 2 Replies
Oct 5, 2011
I have a datetimepicker on my form. When I click the down arrow, it goes down correctly. When I select a date, it stays down. In order for it to roll up, I have to change my focus to a different area.Is there anyway to make it rollup when a day is clicked? It feels awkward the way it is now.
View 5 Replies
Jun 5, 2009
Why this line doesn't change the value of my datetimepicker using me.gatepassbindingsource.addnew():
Me.GatepassDataSet.gpheader.gpdateColumn.DefaultValue = Now()
Implementing BindingNavigatorAddNewItem executes above line correctly. I don't want this because the bindingnavigator items are active. Coding me.gatepassbindingsource.addnew(), I can make my bindingnavigator items inactive/disabled while adding record.
View 4 Replies
Apr 24, 2010
I have a Datetime Picker on a form.
When I use dtArrival.value for instance, it gives me the date in the format "24/04/2010 10:54 PM"
Is there a way that I can grab the value in the format "YY/MM/DD" e.g the value would return "10/04/24"?
Also whats the easiest way to calculate the number of days between two datetime pickers on the same form? I've tried to do it and it's just a mess.
View 4 Replies
Jul 7, 2011
The problem is I am able to extract the data by giving cell reference like: TextBox1.Text = objWorksheet.Cells(5, 2).value
But I want to select a row as per input given by user and want to extract data from that row.
The input given by user is in text format, in my case name of employee. And I have to extract address of that name.
[code]...
View 1 Replies
Mar 15, 2012
i've come across many methods online to create a datetime picker within a datagrid view, but i haven't got a proper solution. i have a DGV which takes in truck no and date of arrival. i want the second column to appear as a datetime picker so the users can be restricted from entering anything else.
View 2 Replies
Sep 30, 2009
I need to count the sick leaves in a month, for that i have to ignor Sat-sun on a datetime picker. how to i set the DateTime picker to ignor Sat and Sun? Assume there are two date time pickers dt1 and dt2 thus there difference will return teh number of days without counting sat-sun.
View 3 Replies
Jan 18, 2011
I have a combo box and a datetime picker on a form that I do not want a user to be able to type in or select. I need both controls to look as if they are enabled with the default backcolor and black font color. How can I do this?
View 4 Replies
Feb 27, 2012
In a Windows Form on Visual Basic, I have a DateTime Picker for a user to select a time and date from.I'm inserting this value via a parameterized query into an Access Database. However, as I'm running the form, I keep getting the error Data type mismatch in criteria expression.If I remove the parameter from the Insert command, the field enters fine. But when I put it back in, it doesn't work.[code]
View 2 Replies
May 23, 2011
I would like to be able to display null values in a datetime picker control. I am using one datetime picker control for both datadisplay and data entry. when I load the data from the database and if there is no date then the datetime picker control must be blank.
View 3 Replies
Jul 14, 2009
I have a datetimepicker and combobox on my form. If a user does not change the date on dtpicker or does not change text on combo box, these controls return null value, and the save operation fails. The controls are bound to data in a database.
View 1 Replies
Jan 16, 2009
I am trying to see find out if a user has been inactive for a certain amount of time by mouse and keyboard events. I want to be able to find this from windows not my form. I am lost as to where to start. I came across this "GetLastInputInfo Function" but am not sure if that is right and/or how to use it.
View 18 Replies
